多尺度冻胶分散体的制备机理

doi:10.7623/syxb201707009

石油学报 ›› 2017, Vol. 38 ›› Issue (7): 821-829.DOI: 10.7623/syxb201707009

多尺度冻胶分散体的制备机理

赵光¹, 由庆², 谷成林¹, 吕亚慧¹, 戴彩丽¹

1. 中国石油大学石油工程学院山东青岛 266580;
2. 中国地质大学能源学院北京 100083

收稿日期:2016-08-08 修回日期:2017-05-12 出版日期:2017-07-25 发布日期:2017-08-10
通讯作者: 戴彩丽,女,1973年3月,1993年获石油大学(华东)学士学位,2006年获中国石油大学(华东)博士学位,现为中国石油大学(华东)教授、博士生导师,主要从事提高采收率与油田化学的研究与应用工作。Email:daicl306@163.com
作者简介:赵光,男,1986年11月,2009年获山东农业大学学士学位,2016年获中国石油大学(华东)博士学位,现为中国石油大学(华东)石油工程学院讲师,主要从事提高采收率与油田化学的研究与应用工作。Email:zhaoguang.sdau@163.com
基金资助:
国家重点基础研究发展计划（973）项目（2015CB250904）和中国博士后科学基金项目"冻胶分散体非均相复合调控体系相互作用机制研究"（2016M602228）资助。

Preparation mechanism of multiscale dispersed particle gel

Zhao Guang¹, You Qing², Gu Chenglin¹, Lü Yahui¹, Dai Caili¹

1. School of Petroleum Engineering, China University of Petroleum, Shandong Qingdao 266580, China;
2. School of Energy Resources, China University of Geosciences, Beijing 100083, China

Received:2016-08-08 Revised:2017-05-12 Online:2017-07-25 Published:2017-08-10

摘要/Abstract

摘要：

常规提高采收率方法因聚合物耐剪切耐地层理化性质差、聚合物微球合成工艺复杂成本高、预交联颗粒注入性差等问题，限制了油藏适用范围。针对这一技术难题，基于地面制备的本体冻胶体系，建立了规模化高效制备多尺度冻胶分散体的工艺新方法，并探索了其制备机理。研究结果表明：制备的多尺度冻胶分散体为形状规则、粒径可控（650~5 000 nm）的水相分散颗粒体系，具备低黏度，表面带负电（-20~-35 mV）的特点。本体冻胶强度、剪切速率、剪切时间和制备方式均会影响多尺度冻胶分散体的制备，其中剪切速率是制备多尺度冻胶分散体的主控因素。多尺度冻胶分散体制备包括本体冻胶的形成和多尺度冻胶分散体的剪切成形两部分，本体冻胶的形成过程包括诱导期、快速交联期、慢速增长期、稳定期4个化学交联阶段；多尺度冻胶分散体的剪切成形过程包括破碎磨圆区、颗粒进一步磨碎区、颗粒均一区3个物理剪切阶段，整个剪切过程持续3~15 min即可完成，进而实现多尺度冻胶分散体的高效制备。

关键词: 多尺度冻胶分散体, 制备机理, 制备参数, 表征, 本体冻胶

Abstract:

Due to poor anti-shearing ability and the resistance to stratigraphic physical and chemical properties of polymer, complex synthesis method and high cost of polymer microspheres, weak injection capacity of preformed particle gel,etc., the traditional enhanced oil recovery method is only applicable to limited reservoirs. Aiming at such a technical difficulty, the bulk gel system was prepared in gravity condition; on this basis, the new technology of multiscale dispersed particle gel (DPG) was established and achieved the large-scale efficient preparation. The preparation mechanism was explored. The research results indicate that the prepared multiscale DPG particles are aqueous phase dispersed particle system with regular shape, controllable size (650-5 000 nm), low viscosity and negative charge on surface (-20——35 mV). The bulk gel strength, shearing rate, shearing time and preparation mode can affect the preparation of multiscale DPG particle, and the shearing rate is the main controlling factor for the preparation of multiscale DPG particles. Multiscale DPG particles consist of two parts, i.e., the formation of bulk gel and the shearing formation of multiscale DPG particles. The formation process of bulk gel is divided into four chemical cross-linking stages, i.e., induction stage, rapid cross-linking stage, slow growth stage and stabilization stage. The shearing formation process of multiscale DPG particles includes three physical shearing stages, i.e., broken rounded stage, further particle milling stage and particle homogeneous stage. The whole shearing process can be completed within 3-15 min, followed by efficient preparation of multiscale DPG particles.

Key words: multiscale dispersed particle gel, preparation mechanism, preparation parameters, characterization, bulk gel

中图分类号:

TE357.46

赵光, 由庆, 谷成林, 吕亚慧, 戴彩丽. 多尺度冻胶分散体的制备机理[J]. 石油学报, 2017, 38(7): 821-829.

Zhao Guang, You Qing, Gu Chenglin, Lü Yahui, Dai Caili. Preparation mechanism of multiscale dispersed particle gel[J]. Acta Petrolei Sinica, 2017, 38(7): 821-829.

参考文献

[1] 杜庆龙. 长期注水开发砂岩油田储层渗透率变化规律及微观机理[J].石油学报,2016,37(9):1159-1164.
DU Qinglong.Variation law and microscopic mechanism of permeability in sandstone reservoir during long-term water flooding development[J].Acta Petrolei Sinica,2016,37(9):1159-1164.
[2] 崔传智,徐建鹏,王端平,等.特高含水阶段新型水驱特征曲线[J].石油学报,2015,36(10):1267-1271.
CUI Chuanzhi,XU Jianpeng,WANG Duanping,et al.A new water flooding characteristic curve at ultra-high water cut stage[J].Acta Petrolei Sinica,2015,36(10):1267-1271.
[3] 刘震,孙迪,李潍莲,等.沉积盆地地层孔隙动力学研究进展[J].石油学报,2016,37(10):1193-1215.
LIU Zhen,SUN Di,LI Weilian,et al.Advances in research on stratigraphic porodynamics of sedimentary basins[J].Acta Petrolei Sinica,2016,37(10):1193-1215.
[4] 赵福麟,张贵才,周洪涛,等.二次采油与三次采油的结合技术及其进展[J].石油学报,2001,22(5):38-42.
ZHAO Fulin,ZHANG Guicai,ZHOU Hongtao,et al.The combination technique of secondary oil recovery with tertiary oil recovery and its progress[J].Acta Petrolei Sinica,2001,22(5):38-42.
[5] 高树生,胡志明,刘华勋,等.不同岩性储层的微观孔隙特征[J].石油学报,2016,37(2):248-256.
GAO Shusheng,HU Zhiming,LIU Huaxun,et al.Microscopic pore characteristics of different lithological reservoirs[J].Acta Petrolei Sinica,2016,37(2):248-256.
[6] 赵福麟.采油用化学剂的研究进展[J].中国石油大学学报:自然科学版,2007,31(1):163-172.
ZHAO Fulin.Research advances of chemicals for oil production[J].Journal of China University of Petroleum:Edition of Natural Science,2007,31(1):163-172.
[7] 赵福麟.油田化学[M].2版.东营:中国石油大学出版社,2010:94-216.
ZHAO Fulin.Oilfield chemistry[M].2nd ed.Dongying:China Petroleum University Press,2010:94-216.
[8] 王德民,程杰成,吴军政,等.聚合物驱油技术在大庆油田的应用[J].石油学报,2005,26(1):74-78.
WANG Demin,CHENG Jiecheng,WU Junzheng,et al.Application of polymer flooding technology in Daqing oilfield[J].Acta Petrolei Sinica,2005,26(1):74-78.
[9] 雷光伦,郑家朋.孔喉尺度聚合物微球的合成及全程调剖驱油新技术研究[J].中国石油大学学报:自然科学版,2007,31(1):87-90.
LEI Guanglun,ZHENG Jiapeng.Composing of pore-scale polymer microsphere and its application in improving oil recovery by profile control[J].Journal of China University of Petroleum:Edition of Natural Science,2007,31(1):87-90.
[10] 崔晓红.新型非均相复合驱油方法[J].石油学报,2011,32(1):122-126.
CUI Xiaohong.A study on the heterogeneous combination flooding system[J].Acta Petrolei Sinica,2011,32(1):122-126.
[11] BAI Baojun,LI Liangxiong,LIU Yuzhang,et al.Preformed particle gel for conformance control:factors affecting its properties and applications[J].SPE Reservoir Evaluation & Engineering,2007,10(4):415-422.
[12] DUPAS A,HENAUT I,ROUSSEAU D,et al.Impact of polymer mechanical degradation on shear and extensional viscosities:toward better injectivity forecasts in polymer flooding operations[R].SPE 164083,2013.
[13] ZITHA P L J.Prediction of polymer viscosity reduction in pores using an exact depletion profile[R].SPE 68981,2001.
[14] DAI Caili,ZHAO Guang,ZHAO Mingwei,et al.Preparation of dispersed particle gel (DPG) through a simple high speed shearing method[J].Molecules,2012,17(12):14484-14489.
[15] ZHAO Guang,DAI Caili,ZHAO Mingwei,et al.Investigation of preparation and mechanisms of a dispersed particle gel formed from a polymer gel at room temperature[J].PLoS One,2013,8(12):e82651.
[16] ZHAO Guang,DAI Caili,ZHAO Mingwei.Investigation of the profile control mechanisms of dispersed particle gel[J].PLoS One,2014,9(6):e100471.
[17] ZHAO Guang,DAI Caili,CHEN Ang,et al.Experimental study and application of gels formed by nonionic polyacrylamide and phenolic resin for in-depth profile control[J].Journal of Petroleum Science and Engineering,2015,135:552-560.
[18] 王世宏,郝迎俊,尹喜祥,等.新型胶体磨的研制与应用[J].化工机械,2000,27(3):155-156.
WANG Shihong,HAO Yingjun,YIN Xixiang,et al.Development and application of the new type colloidal mills[J].Chemical Engineering & Machinery,2000,27(3):155-156.
[19] NI Haifeng,AMME R C.Ion redistribution in an electric double layer[J].Journal of Colloid and Interface Science,2003,260(2):344-348.
[20] SZE A,ERICKSON D,REN L,et al.Zeta-potential measurement using the Smoluchowski equation and the slope of the current-time relationship in electroosmotic flow[J].Journal of Colloid and Interface Science,2003,261(2):402-410.
[21] 赵振国.应用胶体与界面化学[M].北京:化学工业出版社,2008:68-87.
ZHAO Zhenguo.Application of colloid and surface chemistry[M].Beijing:Chemical Industry Press,2008:68-87.
[22] 由庆,周伟,王业飞,等.疏水缔合聚合物/酚醛树脂冻胶反应进程及影响因素[J].油田化学,2010,27(3):260-264.
YOU Qing,ZHOU Wei,WANG Yefei,et al.Crosslinking reaction process and influencing factors for formation of hydrophobically associating polymer/phenolic resin gel[J].Oilfield Chemistry,2010,27(3):260-264.
[23] NAGHASH H J,OKAY O.Gel formation by chain-crosslinking photopolymerization of methyl methacrylate and ethylene glycol dimethacrylate[J].Polymer,1997,38(5):1187-1196.
[24] FU Cuiliu,SUN Zhaoyan,AN LiJia.The relationship between structural gel and mechanical gel for ABA triblock copolymer in solutions:a molecular dynamics simulation[J].The Journal of Physical Chemistry B,2011,115(39):11345-11351.

多尺度冻胶分散体的制备机理

Preparation mechanism of multiscale dispersed particle gel

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张天付, 付小东, 李文正, 李昌, 郝毅, 熊冉, 黄理力, 黄冲. 四川盆地安岳特大型气田不同产能状态下龙王庙组的储层特征[J]. 石油学报, 2020, 41(9): 1049-1059,1116.
[2]	韩强, 屈展, 叶正寅. 基于多尺度均匀化理论的页岩强度表征[J]. 石油学报, 2019, 40(7): 858-865.
[3]	高志勇, 王晓琦, 李建明, 崔京钢, 金旭, 周川闽, 冯佳睿, 石雨昕. 库车坳陷克拉苏构造带白垩系储层孔喉组合类型定量表征与展布[J]. 石油学报, 2018, 39(6): 645-659.
[4]	苟启洋, 徐尚, 郝芳, 陆扬博, 张爱华, 王雨轩, 程璇, 青加伟. 纳米CT页岩孔隙结构表征方法——以JY-1井为例[J]. 石油学报, 2018, 39(11): 1253-1261.
[5]	戚超, 王晓琦, 王威, 刘洁, 妥进才, 刘可禹. 页岩储层微观裂缝三维精细表征方法[J]. 石油学报, 2018, 39(10): 1175-1185.
[6]	穆龙新, 张铭, 夏朝辉, 曲良超, 蒋平. 加拿大白桦地致密气储层定量表征技术[J]. 石油学报, 2017, 38(4): 363-374.
[7]	高兴军, 宋新民, 孟立新, 纪淑红, 和丽娜, 陈建阳, 周新茂, 刘卓. 特高含水期构型控制隐蔽剩余油定量表征技术[J]. 石油学报, 2016, 37(S2): 99-111.
[8]	朱如凯, 吴松涛, 苏玲, 崔景伟, 毛治国, 张响响. 中国致密储层孔隙结构表征需注意的问题及未来发展方向[J]. 石油学报, 2016, 37(11): 1323-1336.
[9]	战风涛, 杨震, 吕志凤, 胡以朋, 潘原, 陈彦飞, 肖常林, 张婷. 高效缓蚀性氯化苄基喹啉衍生物制备与表征[J]. 石油学报, 2015, 36(9): 1116-1121.
[10]	郑丽婧, 操应长, 姜在兴, 王艳忠, 陈林. 东营凹陷民丰北带古近系砂砾岩体孔隙度量化表征[J]. 石油学报, 2015, 36(5): 573-583.
[11]	糜利栋, 姜汉桥, 李俊键, 田野. 页岩储层渗透率数学表征[J]. 石油学报, 2014, 35(5): 928-934.
[12]	邹娟, 戴俊生, 张丹丹, 伍亚, 张艺, 田博. 构造活动强度划分断陷盆地构造区划——以饶阳凹陷为例[J]. 石油学报, 2014, 35(2): 294-302,384.
[13]	雷裕红, 罗晓容, 张立宽, 宋成鹏, 程明. 东营凹陷南斜坡东段沙河街组砂岩输导层连通性量化表征[J]. 石油学报, 2013, 34(4): 692-700.
[14]	张贤松, 孙福街, 侯健, 康晓东, 谢晓庆, 蒋珊珊. 海上稠油聚合物驱开发指标定量表征[J]. 石油学报, 2013, 34(4): 727-732.
[15]	罗晓容　雷裕红　张立宽　陈瑞银　陈占坤　许建华　赵　健. 油气运移输导层研究及量化表征方法[J]. 石油学报, 2012, 33(3): 428-436.