石油学报 ›› 2003, Vol. 24 ›› Issue (4): 69-72,76.DOI: 10.7623/syxb200304016

• 油田开发 • 上一篇    下一篇

高凝油油藏自生热压裂井筒温度场计算模型

彭轩1, 刘蜀知1, 蔡长宇2, 刘福健2, 张洪丽3   

  1. 1. 西南石油学院, 四川南充, 637001;
    2. 辽河石油勘探局井下作业公司, 辽宁盘锦, 124107;
    3. 西南油气田分公司川中油气矿, 四川遂宁, 629000
  • 收稿日期:2002-07-15 修回日期:2003-01-05 出版日期:2003-07-25 发布日期:2010-05-21
  • 作者简介:彭轩,男,1973年5月生,1994年毕业于西南石油学院采油工程专业,现在本院攻读硕士学位,主要从事油气井增产技术与应用研究,工程师.
  • 基金资助:
    油气藏地质及开发工程国家重点实验室基金项目(PLN0141)"高凝油油藏自生热压裂机理及工艺技术研究"的部分成果.

Calculation model for well bore temperature profiles in high freezing point oil reservoirs with in-situ heat fracturing treatment

PENG Xuan1, LIU Shu-zhi1, CAI Chang-yu2, LIU Fu-jian2, ZHANG Hong-li3   

  1. 1. Southwest Petroleum Institute, Nanchong 637001, China;
    2. Liaohe Petroleum Exploration Bureau, Panjin 124107, China;
    3. Southwest Oil and Gas Field Company, Suining 629000, China
  • Received:2002-07-15 Revised:2003-01-05 Online:2003-07-25 Published:2010-05-21

摘要: 在高凝油油藏的压裂施工中,对地层注入冷流体会使井底周围的原油冷却,导致原油析蜡或凝固,从而堵塞流动通道,降低裂缝的导流能力.因而采用自生热压裂技术,依靠生热剂发生化学反应所放出的热量来提高注入流体的温度,使井底压裂液的温度在施工期间高于原油的凝固点或析蜡点.在压裂过程中预测井筒温度的变化,以保证压裂液在进入裂缝后不会对裂缝和储层造成“冷伤害”是实施这一技术的关键.根据热平衡方程,建立了自生热压裂过程中井筒温度场的数学模型,采用隐式差分格式建立了数值计算方程,并对一口井进行了实例计算和分析.结果表明,采用自生热压裂技术能有效地提高压裂液的温度,防止高凝原油析蜡和凝固,避免储层伤害,提高原油的流动能力.

关键词: 高凝油油藏, 自生热压裂技术, 井筒温度场, 热平衡方程, 数学模型

Abstract: To enhance the effect of fracturing treatment for the high freezing point oil reservoirs,it is necessary to prevent the injection of cold fluid from cooling crude oil around the wellbore,because the cold fluid may cause the wax separated or solidified in the crude oil and plugging some flowing channels.The in-situ heat fracturing technique was applied to stimulation of the temperature of injected fluid in high freezing point oil well.The heat out of chemical reactions resulted from heat-generation agent can heat up the oil layer.Consequently,the damage of organism blocking can be removed,and the cold damage of injected fluid to reservoir can also be prevented,and the productivity of oil well can be improved greatly.However,the key for realizing this technology is to forecast the bottom hole temperature profiles during fracturing treatment.In view of this point,a mathematical model for wellbore temperature profiles based on heat-balance equation was established,and the numerical computation equations using implicit difference format were set up.Aiming at an example of Liaohe Oil Field,the effects of injecting temperature,injection rate of surface fluid and concentration of heat-generation agents on the change of the bottom temperature in wellbore were analyzed.This technique can improve the fracturing treatment effect.

Key words: high freezing point oil reservoir, in-situ heat fracturing treatment, wellbore temperature profile, heat balance equation, mathematical model

中图分类号: