石油学报 ›› 2004, Vol. 25 ›› Issue (2): 59-64.DOI: 10.7623/syxb200402012

• 油田开发 • 上一篇    下一篇

油层受水敏伤害时水驱油渗流特征

朱玉双1,2, 曲志浩1,2, 蔺方晓3, 武平仓3, 韩翼云3   

  1. 1. 西北大学大陆动力学教育部重点实验室, 陕西西安, 710069;
    2. 西北大学地质系, 陕西西安, 710069;
    3. 长庆油田勘探开发研究院, 陕西西安, 710021
  • 收稿日期:2003-06-05 修回日期:2003-08-10 出版日期:2004-03-25 发布日期:2010-05-21
  • 作者简介:朱玉双,女,1969年1月生,1993年获西北大学地质系硕士学位,现为西北大学地质系副教授,主要从事油层物理与开发地质研究.E-mail:yshzhu@nwu.edu.cn
  • 基金资助:
    国家重点基础研究发展规划"973"项目(G1999022512)资助.

Seepage flow characters of oil displacement with water drive in water-sensitive formation of Mubo Yan10 reservoir

ZHU Yu-shuang1,2, QU Zhi-hao1,2, LIN Fang-xiao3, WU Ping-cang3, HAN Yi-yun3   

  1. 1 Key Laboratory of Continental Dynamics of the Ministry of Education, Northwest University, Xi'an 710069, China;
    2 Depaetment of Geology, Northwest University, Xi'an 710069, China;
    3 Research Institute of Exploration and Development, Changqing Oilfield Company, Xi'an 710021, China
  • Received:2003-06-05 Revised:2003-08-10 Online:2004-03-25 Published:2010-05-21

摘要: 利用真实的砂岩模型进行了单、双及组合模型3种类型的水驱油实验,比较了有水敏、无水敏伤害时水驱油特征的差别,并对两种条件下的驱油效果进行了评价.研究结果表明,有水敏伤害的注入水驱油与无水敏伤害的地层水驱油相比,水驱油的入口压力增高,孔隙结构非均质性加强,水驱油绕流加重,驱油效率及波及系数降低;两种条件下的水驱油方式均为活塞式,残余油类型主要为绕流形成的簇状残余油.影响木钵区块延10油层驱油效率的主要因素是储集岩的孔隙结构非均质性、水敏伤害、注水压力及加压方式.在对木钵区块延10油层注水开发中,应加强对储层非均质性的研究,并注意采取有效的储层保护措施,提高油层采收率.在注水开发过程中,应逐渐提高注水压力,以最大限度地开采木钵延10油层的石油资源.

关键词: 木钵延10油层, 水敏伤害, 驱替特征, 残余油, 非均质性, 驱油效率, 注水压力

Abstract: Three kinds of water drive experiments including the single model,double model and the combined natural sandstone micro-model were carried out.The oil displacement characters of water drive reservoir with water-sensititve damage and without water-sensitive damage were compared,and the oil displacement efficiencies of water drive under the above conditions were estimated.Compared with the formation water drive reservoir without water-sensitive damage,the injection pressure of water drive in the water-sensitive damaged formation was raised,and the heterogeneity of pore structure became stronger.The injected water resulted in bigger detours,and the displacement efficiency and the sweep efficiency decreased.The oil displacement ways of water drive were mainly piston-types under the two different conditions, and the types of residual oil were mainly clusters.The heterogeneity of porestructure,water sensitivity,injection pressure and the increasing pattern of injection pressure are the chief factors affecting oil displacement efficiency of water drive in Mubo Yan 10 reservoir.It is suggested that the heterogeneity of Mubo Yan10 reservoir should be studied furthermore,and the favorable measures for protecting this reservoir should be adopted in order to enhance oil recovery.The injection pressure should be gradually raised,and the recovery ratio of this reservoir should be enhanced possibly.

Key words: Mubo Yan10 reservoir, water-sensitive formation, displacement characters, residual oil, heterogeneity, oil displacement efficiency, injection pressure

中图分类号: