石油学报 ›› 2004, Vol. 25 ›› Issue (1): 84-88.DOI: 10.7623/syxb200401018

• 石油工程 • 上一篇    下一篇

旋转导向钻具三维小挠度稳态分析的数学模型

李子丰1, 赵金海2, 李敬元1   

  1. 1. 燕山大学机械工程学院, 河北秦皇岛, 066004;
    2. 胜利石油管理局钻井工艺研究院, 山东东营, 257017
  • 收稿日期:2002-11-25 修回日期:2003-03-27 出版日期:2004-01-25 发布日期:2010-05-21
  • 作者简介:李子丰,男,1962年7月生,1983年毕业于大庆石油学院钻井工程专业;1992年于石油大学(北京)获博士学位;1992~1994年为哈尔滨工业大学力学博士后,现为燕山大学石油工程研究所所长、博士生导师.E-mail:zfli@ysu.edu.cn
  • 基金资助:
    "863"项目"旋转导向钻井系统整体方案设计及关键技术研究"的部分研究成果.(2001AA602013).

Mathematical models for 3D analysis of rotary steering bottom hole assembly with small deflection

LI Zi-feng1, ZHAO Jin-hai2, LI Jing-yuan1   

  1. 1. Petroleum Engineering Institute, Yanshan University, Qinhuandao 066004, China;
    2. Drilling Technology Research Institute of Shengli Petroleum Administration Bureau, Dongying 257017, China
  • Received:2002-11-25 Revised:2003-03-27 Online:2004-01-25 Published:2010-05-21

摘要: 在普通旋转钻具的基础上,研制了一种旋转的近钻头稳定器,它可以将钻柱稳定在井眼截面的需要位置,以控制井眼轨道.为了研制和应用这种新钻具,建立了适用于该种旋转导向钻具进行三维小挠度静力学分析的数学模型,包括:①微分方程;②钻头、稳定器、变截面、切点和井壁的边界条件;③钻头的侧向力和钻头转角;④钻具的导向能力与偏心距和偏心方向.给出了一种旋转导向钻具的受力状态分析、井眼曲率预测及确定导向稳定器运行参数的计算实例.

关键词: 旋转导向钻具, 钻头稳定器, 数学模型, 钻柱力学

Abstract: A kind of rotary steering stabilizer used in a common rotary bottom hole assembly to control well path was developed.In order to develop and use this kind of bottom assembly,the mathematical models for 3D mechanical analysis of bottom hole assembly (BHA) with small deflection were proposed.The mathematical models include (1) differential equations; (2) boundary conditions of drill bit,stabilizer,bend angle,diameter change,tangent point and borehole wall; (3) models for calculating lateral forces and deflection angles of bit; (4) models for determining navigation ability and navigattion parameters.As an example,a given rotary steering bottom hole assembly was studied.

Key words: rotary steering bottom hole assembly, rotary steering stabilizer, mathematical model, drill string mechanics

中图分类号: