气体钻井稳定器设计及结构参数对工具性能的影响

doi:10.7623/syxb201105022

石油学报 ›› 2011, Vol. 32 ›› Issue (5): 877-881.DOI: 10.7623/syxb201105022

气体钻井稳定器设计及结构参数对工具性能的影响

祝效华孙超刘少胡

西南石油大学机电工程学院四川成都 610500

收稿日期:2011-02-25 修回日期:2011-06-03 出版日期:2011-09-25 发布日期:2011-11-28
通讯作者: 祝效华
作者简介:祝效华，男，1978年7月生，2005年获西南石油大学机械设计及理论专业博士学位，现为西南石油大学副教授，主要从事杆管柱力学及井下工具等方面的科研工作。
基金资助:
国家自然科学基金项目（No.50804040）资助。

Gas drilling stabilizer design and influence of structural parameters on its performance

ZHU Xiaohua SUN Chao LIU Shaohu

Received:2011-02-25 Revised:2011-06-03 Online:2011-09-25 Published:2011-11-28

摘要/Abstract

摘要：

针对气体钻水平井中岩屑在下井壁滞留和聚集的问题，设计了一种气体钻井专用稳定器，所设计的新型结构可避免稳定器处发生沉屑卡钻或减少其发生几率。基于气-固两相流理论和数值模拟技术，提出了稳定器工作性能优劣的评价指标，并研究了稳定器结构参数（流道入出口径、槽深、窄流道位置、螺旋度、螺旋棱轴向长度、螺旋棱形状）对稳定器工作性能的影响。研究表明：在气体循环介质条件下，结构参数对稳定器的工作性能影响很大，燕尾槽形的流道入出口和零端面厚度的螺旋棱导流坡面复合结构可以有效解决稳定器入、出口端的岩屑粒子反射和沉降问题。直径为215.9 mm稳定器可用于气体钻井，特别是气体钻水平井中，提出的工作性能评价方法和研究结论可指导其他规格气体钻井稳定器的设计。

关键词: 气体钻井, 钻具稳定器, 结构参数, 岩屑沉降, 卡钻

Abstract:

In terms of the intention and accumulation of cuttings in low side wellbores in horizontal-well gas drilling, a drill stabilizer was designed particularly for gas drilling and this stabilizer with novel structures can prevent drill pipe from sticking caused by cuttings settlement or reduce the occurrence probability of drill-pipe sticking in gas drilling. Based on the gas-liquid two-phase flow theory and numerical simulation, we proposed evaluation indices for the stabilizer performance and studied effects of stabilizer structural parameters on the stabilizer performance, such as inlet and outlet apertures of flow channels, groove depth, narrow flow channel locations, helicity, and spiral edged shape. The results showed that structural parameters may significantly affect the stabilizer performance on conditions of gas circulation media, composite structures of the inlet and outlet of dovetail-shaped flow channels and the helical edged diversion slope with zero end-edge width can effectively solve the rebound and settlement of debris particles in the inlet and outlet of the stabilizer. A stabilizer with the diameter of 215.9 mm can be used in gas drilling, particularly in horizontal-well gas drilling. Performance evaluation methods proposed in the present paper and its conclusions are of guide significance in designing specifications of the other gas-drill stabilizers.

Key words: gas drilling, drill stabilizer, structural parameter, cuttings settlement, sticking of a tool

祝效华孙超刘少胡. 气体钻井稳定器设计及结构参数对工具性能的影响[J]. 石油学报, 2011, 32(5): 877-881.

ZHU Xiaohua SUN Chao LIU Shaohu. Gas drilling stabilizer design and influence of structural parameters on its performance[J]. Editorial office of ACTA PETROLEI SINICA, 2011, 32(5): 877-881.

参考文献

[1]赵业荣，孟英峰，雷桐，等.气体钻井理论与实践[M].北京：石油工业出版社，2007:25-32．

Zhao Yerong,Meng Yingfeng,Lei Tong,et al.Theory and practice of gas drilling[M].Beijing：Petroleum Industry Press,2007:25-32．[2]Guo Boyun,Ali Ghalambor.欠平衡钻井气体体积流量的计算[M].胥思平，译.北京：中国石化出版社,2006：9-12．

Guo Boyun,Ghalambor A.Volume flow calculation of underbalanced gas drilling[M].Translated by Xu Siping.Beijing:China Petrochemical Press,2006:9-12．

[3]祝效华，刘少胡，童华．气体钻井钻杆冲蚀规律研究[J]．石油学报，2010，31(6):1013-1017.

Zhu Xiaohua,Liu Shaohu,Tong Hua.A study on the drill pipe erosion law in gas drilling [J].Acta Petrolei Sinica,2010，31(6):1013-1017.

[4]郭建华，佘朝毅，李黔,等．气体钻井岩屑运移机理研究 [J]．石油学报，2007，28(6):129-132． 

Guo Jianhua,She Chaoyi,Li Qian,et al.Study on cuttings migration mechanism during gas drilling [J].Acta Petrolei Sinica,2007,28(6):129-132．

[5]宋洵成，管志川，陈绍维．斜井岩屑运移临界环空流速力学模型 [J]．中国石油大学学报:自然科学版,2009，33(1):53-56.

Song Xuncheng,Guan Zhichuan,Chen Shaowei.Mechanics model of critical annular velocity for cuttings transportation in deviated well [J].Journal of the University of Petroleum,China:Edition of Natural Science,2009,33（1）:53-56.

[6]王治中，邓金根，孙福街，等．井筒砂粒运移规律室内模拟实验研究 [J]．石油学报,2006，27(4):130-132.

Wang Zhizhong,Deng Jingen,Sun Fujie，et al.Experimental study on sand grain migration in wellbore [J].Acta Petrolei Sinica, 2006,27(4):130-132.

[7]李国美，王跃社，孙虎，等．节流器内液-固颗粒冲蚀数值模拟 [J]．石油学报,2009，30(1):145-148.

Li Guomei,Wang Yueshe,Sun Hu，et al.Numerical simulation on solid particle erosion of solid-liquid two-phase fluid in flow controller [J].Acta Petrolei Sinica,2009，30(1):145-148.

[8]周英操，高德利，刘永贵．欠平衡钻井环空多相流井底压力计算模型 [J]．石油学报,2005，26(2):96-99.

Zhou Yingcao,Gao Deli,Liu Yonggui.New model for calculating bottom hole pressure of multiphase flow in annulus of underbalanced straight well [J].Acta Petrolei Sinica,2005，26(2):96-99.

[9]Indra G,Rudi R.Determining cutting transport parameter in a horizontal coiled tubing underbalanced drilling operation [R].SPE 101937,2002.

[10]廖开贵，李颖川，杨志，等．产水气藏气液两相管流动态规律研究 [J]．石油学报,2009，30(4):607-612.

Liao Kaigui,Li Yingchuan,Yang Zhi，et al.Study on pressure drop models of gas liquid two-phase pipe flowing as reservoir

[J].Acta Petrolei Sinica,2009，30(4):607-612.

[11]李兆敏，王渊，张琪．宾汉流体在环空中流动时的速度分布规律 [J]．石油学报,2002，23(2):87-91.

Li Zhaomin,Wang Yuan,Zhang Qi.The law of velocity distribution of bingham fluid’s flowing in the encircle pipe [J].Acta Petrolei Sinica,2002，23(2):87-91.

[12]龙芝辉，汪志明，郭晓乐．斜直井段和水平井段中环空岩屑运移机理的研究 [J]．中国石油大学学报:自然科学版,2005，29(5)：42-45.

Long Zhihui,Wang Zhiming,Guo Xiaole.Transport mechanism of cuttings in annulus during deviated and horizontal drilling

[J].Journal of the University of Petroleum,China:Edition of Natural Science,2005,29(5)：42-45.

[13]杨玉良，蒲晓林，魏治明.水平井岩屑床清除的应用研究 [J].钻井液与完井液,1994,11(1):13-17.

Yang Yuliang,Pu Xiaolin,Wei Zhiming.On the removal of cuttings bed in horizontal well [J].Drilling Fluid and Completion Fluid, 1994,11(1):13-17.

[1]	罗成波, 蒋祖军, 李皋, 何龙, 孟英峰, 欧彪, 肖国益, 严焱诚, 王希勇. QL1井井底突发性岩爆动力学机理及动态演化过程[J]. 石油学报, 2020, 41(2): 244-252.
[2]	张彦廷, 郑志滨, 陈敬凯, 黄鲁蒙, 张晧, 王志坤, 葛政. 石油钻柱顶部高频激振解卡耦合响应特性[J]. 石油学报, 2020, 41(12): 1697-1705.
[3]	狄勤丰, 王春生, 李宁, 王文昌, 冯少波, 王延民, 梁红军. 巨厚砾岩层气体钻井井眼特征[J]. 石油学报, 2015, 36(3): 372-377.
[4]	王明杰, 狄勤丰, 王文昌, 陈锋, 沈子俊. 气体钻井钻柱动态应力特征[J]. 石油学报, 2014, 35(1): 159-165.
[5]	黄小兵　刘清友. 基于气体钻井工艺参数的钻具冲蚀模型[J]. 石油学报, 2012, 33(5): 878-880.
[6]	祝效华　贾彦杰　童　华. 气体钻井钻柱振动特性及控制措施[J]. 石油学报, 2012, 33(2): 293-297.
[7]	祝效华刘少胡童华. 气体钻井钻杆冲蚀规律研究[J]. 石油学报, 2010, 31(6): 1013-1017.
[8]	付双成, 孙国刚, 姬忠礼. 气体钻井地面分离器的设计及试验研究[J]. 石油学报, 2009, 30(2): 300-303,307.
[9]	刘永贵, 王洪英. 徐深气田气体钻井破岩机理的初步研究[J]. 石油学报, 2008, 29(5): 773-776.
[10]	郭建华, 佘朝毅, 李黔, 孙万里. 气体钻井井筒冲蚀作用定量分析及控制方法[J]. 石油学报, 2007, 28(6): 129-132.
[11]	王延江, 杨培杰, 史清江, 孙正义. 一种基于支撑向量机学习预测井眼轨迹的新方法[J]. 石油学报, 2005, 26(5): 98-101.
[12]	王尊策, 陈维勤, 蒋明虎, 刘晓敏, 赵立新. 动态水力旋流器结构参数的优选设计[J]. 石油学报, 2001, 22(4): 104-107.
[13]	林军, 伍开松. 闸板防喷器胶芯密封参数算法及结构优化[J]. 石油学报, 1997, 18(1): 123-128.
[14]	孙星云, 郭学增, 胡湘炯. 卡钻预测分析[J]. 石油学报, 1992, 13(S1): 70-79.
[15]	祝总祺, 严衡文, 魏郑铁. 利用测井资料解释砂岩储集层孔隙结构的方法[J]. 石油学报, 1988, 9(2): 57-66.

气体钻井稳定器设计及结构参数对工具性能的影响

Gas drilling stabilizer design and influence of structural parameters on its performance

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价