基于气体钻井工艺参数的钻具冲蚀模型

doi:10.7623/syxb201205020

石油学报 ›› 2012, Vol. 33 ›› Issue (5): 878-880.DOI: 10.7623/syxb201205020

基于气体钻井工艺参数的钻具冲蚀模型

黄小兵 1,2　刘清友 1

1　西南石油大学石油与天然气工程博士后科研流动站　四川成都　610500；2　攀枝花学院机械工程学院　四川攀枝花　617000

收稿日期:2012-03-02 修回日期:2012-06-27 出版日期:2012-09-25 发布日期:2012-11-27
通讯作者: 黄小兵
作者简介:黄小兵，男，1974年4月生，2009年获西南石油大学博士学位，现为西南石油大学石油与天然气工程博士后科研流动站博士后、副教授，主要从事空气钻井装备的研究。
基金资助:
国家自然科学基金重点项目（No.51134004）资助。

An erosion model of drill string based on process parameters of gas drilling

HUANG Xiaobing 1,2　LIU Qingyou 1

Received:2012-03-02 Revised:2012-06-27 Online:2012-09-25 Published:2012-11-27

摘要/Abstract

摘要：

针对气体钻井中钻具冲蚀磨损严重而造成钻具过早降级和报废的问题，基于微切削理论，建立了钻井环空中钻具的冲蚀模型，并依据该模型推导出了气体钻井中钻具冲蚀强度的数学模型，该数学模型把气体钻井中钻具的冲蚀强度同井下状态参数、钻具材料、井身结构，以及注气量、机械钻速等钻井工艺参数联系起来。通过钻具冲蚀模拟实验确定了数学模型中的常数，并对数学模型进行了修正，为气体钻井作业中合理选择钻井工艺参数和预测钻具的冲蚀磨损提供了依据。利用该数学模型分析表明，气体钻井中的注气量应以保持排屑顺畅即可，过分加大注气量，不仅会造成能源浪费，而且会加剧钻具的冲蚀磨损，导致钻具过早降级或报废。

关键词: 气体钻井, 工艺, 钻具, 失效, 冲蚀磨损, 数学模型, 冲蚀实验

Abstract:

Based on the micro-cutting theory, we established an erosion model of drilling string in wellbore annulus to solve drilling-string premature degradation and abandonment problems caused by severe erosion wornout in gas drilling. In addition, a mathematical model for computing the erosion strength of drilling string in gas drilling was derived from the erosion model, and this mathematical model closely combines the erosion strength of drilling string in gas drilling with various underground status, drilling-string material, hole structure, and drilling process parameters of gas drilling, such as, amount of gas injection and the penetration rate. Through erosion simulation experiments of drilling string, constants of the mathematical model were determined and the mathematical model was modified as well, which can provide a basis for the rational selection of drilling process parameters and the erosion wornout prediction of drilling string in gas drilling practice. The analysis with this mathematical model showed that the amount of gas injection in gas drilling should be controlled just to keep the cuttings discharge smooth, the excess amount of gas injection would cause not only energy waste but also accelerate the erosion wornout of drilling string and result in drilling-string premature degradation and abandonment.

Key words: gas drilling, process, drilling string, failure, erosion wornout, mathematical model, erosion experiment

黄小兵　刘清友. 基于气体钻井工艺参数的钻具冲蚀模型[J]. 石油学报, 2012, 33(5): 878-880.

HUANG Xiaobing　LIU Qingyou. An erosion model of drill string based on process parameters of gas drilling[J]. Editorial office of ACTA PETROLEI SINICA, 2012, 33(5): 878-880.

参考文献

[1]祝效华,刘少胡,童华.气体钻井钻杆冲蚀规律研究[J].石油学报,2010,31(6):1013-1017.

Zhu Xiaohua,Liu Shaohu,Tong Hua.A study on the drill pipe erosion law in gas drilling[J].Acta Petrolei Sinica,2010,31(6):1013-1017.

[2]付双成,孙国刚,姬忠礼.气体钻井地面分离器的设计及试验研究[J].石油学报,2009,30(2):300-304.

Fu Shuangcheng,Sun Guogang,Ji Zhongli.Design and experiment study of ground separation equipment in gas drilling[J].Acta Petrolei Sinica,2009,30(2):300-304.

[3]范军,陈光,杲长良,等.欠平衡钻井理论模型及应用[J].石油学报,2000,21(4):75-79.

Fan Jun,Chen Guang,Gao Changliang,et al.An underbalanced drilling theoretical model and its application[J].Acta Petrolei Sinica,2000,21(4):75-79.

[4]万里平.空气钻井中钻具腐蚀与防护及其机理研究[D].成都:西南石油大学,2004.

Wan Liping.Mechanism study of corrosion and protection of drilling tool for gas drilling[D].Chengdu:Southwest Petroleum University,2004.

[5]黄小兵.气体钻井钻具冲蚀磨损机理研究[D].成都:西南石油大学,2009.

Huang Xiaobing.Study of erosion mechanism of drilling tool for gas drilling[D].Chengdu:Southwest Petroleum University, 2009.

[6]董刚,张九渊.固体粒子冲蚀磨损研究进展[J].材料科学与工程学报,2003,21(2):307-312.

Dong Gang,Zhang Jiuyuan.Developments of research on the solid particle erosion of materials[J].Journal of Materials Science & Engineering,2003,21(2):307-312.

[7]Zhou J R,Bahadur S.Effect of blending of silicon carbide particles in varying sizes on the erosion of Ti-6Al-4V[J].Wear, 1989,132(2):235-246.

[8]黄小兵,陈次昌,黄志强,等.一种模拟气体钻井钻具冲蚀磨损的试验装置:中国,200720082146.0[P].2007-11-24.

Huang Xiaobing,Chen Cichang,Huang Zhiqiang,et al.A simulation testing equipment of erosion wear of drilling tools for gas drilling:China,200720082146.0[P].2007-11-24.

[9]黄小兵,熊建新,陈次昌.气体钻井钻具冲蚀磨损实验装置[J].石油机械,2008,36(9):1-3.

Huang Xiaobing,Xiong Jianxin,Chen Cichang.The experimental device for erosion of drilling tool of gas drilling[J].China Petroleum Machinery,2008,36(9):1-3.

[10]黄小兵,陈次昌,董耀文.气体钻井的岩屑特征及粒度分布测试[J].天然气工业,2008,28(11):83-84.

Huang Xiaobing,Chen Cichang,Dong Yaowen.Characteristics of gas drilling cuttings and grain size distribution determination[J].Natural Gas Industry,2008,28(11):83-84.

[11]Liebhard M,Levy A.The effect of erodent particle characteristics on the erosion of metals[J].Wear,1991,151(2):381-390.

[12]Karimi A,Verdon Ch.Martin J L,et al.Slurry erosion behavior of thermally sprayed WC-M coating[J].Wear,1995,186-187:480-486.

[13]潘牧,罗志平.材料的冲蚀问题[J].材料科学与工程,1999, 17(3): 92-96.

Pan Mu,Luo Zhiping.Erosion of materials[J].Materials Science & Engineering,1999,17(3):92-96.

[14]庞佑霞,陆由南,尹喜云.含沙量和砂粒粒径对QT500材料冲蚀磨损特性的影响[J].机械工程材料,2006,30(4):51-54.

Pang Youxia,Lu Younan,Yin Xiyun.The influence of sediment concentration and particle size on the erosion wearing characteristics of QT500[J].Materials for Mechanical Engineering,2006,30(4):51-54.

[1]	祝效华, 罗云旭, 刘伟吉, 高锐, 贾玉丹, 刘呈君. 等离子体电脉冲钻井破岩机理的电击穿实验与数值模拟方法[J]. 石油学报, 2020, 41(9): 1146-1162.
[2]	王言聿, 成志强, 郭旭. 复合材料增强管线钢管压力设计新方法[J]. 石油学报, 2020, 41(8): 1025-1032.
[3]	罗成波, 蒋祖军, 李皋, 何龙, 孟英峰, 欧彪, 肖国益, 严焱诚, 王希勇. QL1井井底突发性岩爆动力学机理及动态演化过程[J]. 石油学报, 2020, 41(2): 244-252.
[4]	李杰训, 赵忠山, 李学军, 王梓栋, 李娜. 大庆油田聚合物驱配注工艺技术[J]. 石油学报, 2019, 40(9): 1104-1115.
[5]	王天源, 修建龙, 黄立信, 崔庆锋, 马原栋, 苗钧逸, 俞理. 考虑油藏环境因素和微生物因子的微生物采油数学模型[J]. 石油学报, 2019, 40(4): 448-456.
[6]	王旱祥, 吕孝孝, 刘延鑫, 陈升山, 兰文剑. 碳纤维抽油杆采油系统柱塞超冲程产生机理[J]. 石油学报, 2019, 40(12): 1531-1541.
[7]	郭凌云, 周晶, 代云云. 基于不同随机退化过程的腐蚀管道时变失效概率[J]. 石油学报, 2019, 40(12): 1542-1552.
[8]	任福深, 方天成, 程晓泽, 常玉连. 粒子射流冲击下破岩应力分析与破岩区域[J]. 石油学报, 2018, 39(9): 1070-1080.
[9]	张鹤, 狄勤丰, 覃光煦, 陈薇, 王文昌, 陈锋. 预弯底部钻具组合横向振动响应的快速求解[J]. 石油学报, 2017, 38(12): 1441-1447.
[10]	毕永强, 俞理, 修建龙, 伊丽娜, 黄立信, 王天源. 采油微生物在多孔介质中的迁移滞留机制[J]. 石油学报, 2017, 38(1): 91-98.
[11]	祝效华, 迟博. 螺杆钻具定转子热力耦合行为[J]. 石油学报, 2016, 37(8): 1047-1052.
[12]	赵金洲, 彭瑀, 林啸, 刘作磊, 许文俊. 考虑复杂应力分布的数值缝宽计算模型及其应用[J]. 石油学报, 2016, 37(7): 914-920.
[13]	狄勤丰, 陈锋, 李宁, 王明杰, 王文昌, 刘树林. 超深井钻具接头极限工作扭矩图版及其应用[J]. 石油学报, 2016, 37(4): 516-522.
[14]	李萍, 刘志龙, 邹剑, 刘海英, 于继飞, 范永涛. 渤海旅大27-2油田蒸汽吞吐先导试验注采工程[J]. 石油学报, 2016, 37(2): 242-247.
[15]	朱本瑞, 陈国明, 林红, 刘红兵. 深水导管架平台结构动力推覆分析方法[J]. 石油学报, 2016, 37(12): 1550-1556.

基于气体钻井工艺参数的钻具冲蚀模型

An erosion model of drill string based on process parameters of gas drilling

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价