[1] Shron Wang.Optimize fracturing for shale resources based on understanding production mechanisms:Global Unconventional Gas Conference,Beijing,China,Sep.13-15,2011[C].Beijing:Gas Technical Institute about American,2011:156-162.
[2] 吴奇,胥云,王腾飞,等.增产改造理念的重大变革:体积改造技术概论[J].天然气工业,2011,31(4):7-12.
Wu Qi,Xu Yun,Wang Tengfei,et al.The revolution of reservoir stimulation:an introduction of volume fracturing[J].Natural Gas Industry,2011,31(4):7-12.
[3] 雷群,胥云,蒋廷学,等.用于提高低-特低渗透油气藏改造效果的缝网压裂技术[J].石油学报,2009,30(2):237-241.
Lei Qun,Xu Yun,Jiang Tingxue,et al."Fracture network" fracturing technique for improving post-fracturing performance of low and ultra-low permeability reservoirs[J].Acta Petrolei Sinica,2009,30(2):237-241.
[4] 翁定为,雷群,胥云,等.缝网压裂技术及其现场应用[J].石油学报,2011,32(2):281-284.
Weng Dingwei,Lei Qun,Xu Yun,et al.Network fracturing techniques and its application in the field[J].Acta Petrolei Sinica,2011,32(2):281-284.
[5] 王晓泉,张守良,吴奇,等.水平井分段压裂多段裂缝产能影响因素分析[J].石油钻采工艺,2009,31(1):73-76.
Wang Xiaoquan,Zhang Shouliang,Wu Qi,et al.Factors affecting the productivity of multi-section fractures in subsection fracturing of horizontal wells[J].Oil Drilling and Production Technology,2009,31(1):73-76.
[6] Mayerhofer M J,Lolon E P,Warpinski N R,et al.What is stimulated reservoir volume[R].SPE 119890,2010.
[7] Warpinski N R,Mayerhofer M J,Vincent M C,et al.Stimulating unconventional reservoirs:maximizing network growth while optimizing fracture conductivity[R].SPE 114173,2008.
[8] Cipolla C L,Warpinski N R,Mayerhofer M J,et al.The relationship between fracture complexity,reservoir properties,and fracture-treatment design[R].SPE 115769,2008.
[9] Cipolla C,Weng X,Onda H,et al.Malpani:new algorithms and integrated workflow for tight gas and shale completions[R].SPE 146872,2012.
[10] Cipolla C L,Lolon E P,Ceramics C,et al.Fracture design considerations in horizontal wells drilled in unconventional gas reservoirs[R].SPE 119366,2009.
[11] Cipolla C L,Lolon E P,Dzubin B.Evaluating stimulation effectiveness in unconventional gas reservoirs[R].SPE 124843,2009.
[12] Cipolla C L,Warpinski N R,Mayerhofer M J,et al.Hydraulic fracture complexity:diagnosis,remediation,and explotation[R].SPE 115771,2008.
[13] 赵海峰,陈勉,金衍,等.页岩气藏网状裂缝系统的岩石断裂动力学[J].石油勘探与开发,2012,39(4):465-470.
Zhao Haifeng,Chen Mian,Jin Yan,et al.Rock fracture kinetics of the fracture mesh system in shale gas reservoirs[J].Petroleum Exploration and Development,2011,39(4):465-470.
[14] 贾长贵,李双明,王海涛,等.页岩储层网络压裂技术研究与试验[J].中国工程科学,2012,14(6):106-112.
Jia Changgui,Li Shuangming,Wang Haitao,et al.Shale reservoir network fracturing technology research and experiment[J].Engineering Science,2012,14(6):106-112.
[15] McDaniel B W.Horizontal wells with multi-stage fracs provide better economics for many lower permeability reservoirs[R].SPE 133427,2010.
[16] Xu Wenyue,Thiercelin M,Calvez J L,et al.Fracture network development and proppant placement during slickwater fracturing treatment of Barnett shale Laterals[R].SPE 135484,2010.
[17] 叶静,胡永全,叶生林,等.页岩气藏水力压裂技术进展[J].天然气勘探与开发,2012,35(4):64-68.
Ye Jing,Hu Yongquan,Ye Shenglin,et al.Technical progress of hydraulic fracturing in shale-gas reservoirs[J].Natural Gas Exploration and Development,2012,35(4):64-68.
[18] Jaripatke O,Grieser B,Chong K K,et al.A review of successful approach towards shale play stimulation in the last two decades-a completions road map to shale play development[R].SPE 130369,2010.
[19] Wang Cong,Ding Didier,Wu Yushu.Characterizing hydraulic fractures in shale gas reservoirs using transient pressure tests[R].SPE 163819,2013.
[20] Gong Bin,Qin Guan,Towler B F,et al.Discrete modeling of natural and hydraulic fractures in shale-gas reservoirs[R].SPE 146842,2011.
[21] Singh I,Miskimins J L.A numerical study of the effects of packer-induced stresses and stress shadowing on fracture initiation and stimulation of horizontal wells[R].SPE 136856,2011.
[22] Yang Mei,Economides M J.Natural proppants for hydraulic fracture production optimization in Barnett and Eagle Ford shales[R].SPE 153811,2012.
[23] 王林,马金良,苏凤瑞,等.北美页岩气工厂化压裂技术[J].钻采工艺,2012,35(6):48-50.
Wang Lin,Ma Jinliang,Su Fengrui,et al.Fracturing factory technology for North America[J].Drilling and Production Technology,2012,35(6):48-50. |