高压近绝热量热法获取原油氧化动力学参数

doi:10.7623/syxb201404016

石油学报 ›› 2014, Vol. 35 ›› Issue (4): 745-748.DOI: 10.7623/syxb201404016

高压近绝热量热法获取原油氧化动力学参数

江航, 昝成, 宋新民, 马德胜

中国石油勘探开发研究院提高石油采收率国家重点实验室北京 100083

收稿日期:2014-02-04 修回日期:2014-05-08 出版日期:2014-07-25 发布日期:2014-08-05
通讯作者: 江航，男，1985年9月生，2007年获清华大学学士学位，2009年获清华大学硕士学位，现为中国石油勘探开发研究院采收率所工程师、中国石油勘探开发研究院博士研究生，主要从事油气田开发工作。Email：jianghang@petrochina.com.cn
作者简介:江航，男，1985年9月生，2007年获清华大学学士学位，2009年获清华大学硕士学位，现为中国石油勘探开发研究院采收率所工程师、中国石油勘探开发研究院博士研究生，主要从事油气田开发工作。Email：jianghang@petrochina.com.cn
基金资助:
中国石油天然气股份有限公司科技攻关专项课题（2011A-1006）资助。

Determination of oxidation kinetics parameters for crude oil using high pressure and near adiabatic calorimetry method

Jiang Hang, Zan Cheng, Song Xinmin, Ma Desheng

State Key Laboratory of Enhanced Oil Recovery, PetroChina Research Institute of Petroleum Exploration & Development, Beijing 100083, China

Received:2014-02-04 Revised:2014-05-08 Online:2014-07-25 Published:2014-08-05

摘要/Abstract

摘要：

原油氧化反应动力学特性是注空气提高石油采收率技术室内研究及现场应用的基础。为掌握原油与空气的氧化反应动力学特征，运用能量方程、质量作用定律及经典动力学理论，推导了高压近绝热量热法原油氧化反应动力学特性数学模型，给出了氧化反应动力学基础参数的计算方法。采用加速量热仪，通过实验研究了高压近绝热条件下典型原油的氧化特性。运用该数学模型，计算得到了典型原油的反应级数、活化能及指前因子，其相关系数均大于0.99。采用原油高压近绝热量热实验及其氧化动力学参数计算方法，能够为注空气提高石油采收率技术室内物理模拟及数值模拟研究提供可靠的基础数据。

关键词: 原油, 氧化, 高压, 绝热, 动力学

Abstract:

Understanding the kinetic characteristics of crude oil oxidation is the foundation for laboratory researches and field applications regarding air injection technology to enhance oil recovery. In this study, a mathematical model for crude oil oxidation kinetics is derived using high-pressure near-adiabatic calorimetry and formulas for calculating the kinetic parameters which are provided in accordance with energy conservation equation, the mass action law, and the classical kinetic theory. The oxidation reactions of typical crude oil under high-pressure and near-adiabatic conditions are experimentally studied using an accelerating rate calorimeter, and the kinetic parameters including reaction order, activation energy, and pre-exponential factor are calculated with correlation coefficient>0.99. Using the proposed high-pressure near-adiabatic calorimetry and parameter calculation methods, reliable basic data can be obtained for laboratory research and numerical simulation on the air injection technology for enhancing oil recovery.

Key words: crude oil, oxidization, high pressure, adiabatic, kinetics

中图分类号:

TE357.7

江航, 昝成, 宋新民, 马德胜. 高压近绝热量热法获取原油氧化动力学参数[J]. 石油学报, 2014, 35(4): 745-748.

Jiang Hang, Zan Cheng, Song Xinmin, Ma Desheng. Determination of oxidation kinetics parameters for crude oil using high pressure and near adiabatic calorimetry method[J]. ACTA PETROLEI SINICA, 2014, 35(4): 745-748.

参考文献

[1] Ursenbach M G,Moore R G.Air injection in heavy oil reservoirs-a process whose time has come(again)[J].Journal of Canadian Petroleum Technology,2010,49(1):48-54.
[2] 王元基,何江川,廖广志,等.国内火驱技术发展历程与应用前景[J].石油学报,2012,33(5):909-914.
Wang Yuanji,He Jiangchuan,Liao Guangzhi,et al.Overview on the development history of combustion drive and its application prospect in China[J].Acta Petrolei Sinica,2012,33(5):909-914.
[3] 何江川,廖广志,王正茂.油田开发战略与接替技术[J].石油学报,2012,33(3):519-525.
He Jiangchuan,Liao Guangzhi,Wang Zhengmao.Oilfield development strategy and replacement techniques[J].Acta Petrolei Sinica,2012,33(3):519-525.
[4] Nodwell J,Moore R,Ursenbach M,et al.Economic considerations for the design of In-Situ combustion projects[J].Journal of Canadian Petroleum Technology,2000,39(8).
[5] Greaves M,Dong L L,Rigby S P.Upscaling THAI:experiment to pilot[R].SPE 148989,2011.
[6] Moore R G,Mehta S A,Ursenbach M G.A guide to high pressure air injection(HPAI)based oil recovery[R].SPE 75207,2002.
[7] 崔玉峰,杨德伟,陈玉丽,等.火烧油层热力采油过程的数值模拟[J].石油学报,2004,25(5):99-103.
Cui Yufeng,Yang Dewei,Chen Yuli,et al.Numerical simulation of thermal flooding process of in-situ combustion[J].Acta Petrolei Sinica,2004,25(5):99-103.
[8] Turta A T,Singhal A K.Reservoir engineering aspects of light-oil recovery by air injection[J].SPE Reservoir Evaluation & Engineering,2001,4(4):336-344.
[9] 唐君实,关文龙,梁金中,等.热重分析仪求取稠油高温氧化动力学参数[J].石油学报,2013,34(4):775-779.
Tang Junshi,Guan Wenlong,Liang Jinzhong,et al.Determination on high-temperature oxidation kinetic parameters of heavy oils with thermogravimetric analyzer[J].Acta Petrolei Sinica,2013,34(4):775-779.
[10] 郭彦坤,杨继涛,苏君雅,等.采用活化能分布模型解析渣油的热反应动力学参数[J].石油学报(石油加工),2003,15(5):69-73.
Guo Yankun,Yang Jitao,Su Junya,et al.Determination of kinetic parameters of thermal reaction for residues with activation energy distribution model[J].Acta Petrolei Sinica(Petroleum Processing Section),2003,15(5):69-73.
[11] Yannimaras D V,Tiffin D L.Screening of oils for In-Situ combustion at reservoir conditions via accelerating rate calorimetry[R].SPE 27791,1995.
[12] Fraim M L,Moffitt P D,Yannimaras D V.Laboratory testing and simulation results for high pressure air injection in a waterflooded North Sea oil reservoir[R].SPE 38905,1997.
[13] Sarma H K,Yazawa N,Moore R G,et al.Screening of three light-oil reservoirs for application of air injection process by accelerating rate calorimetric and TG/PDSC tests[J].Journal of Canadian Petroleum Technology,2002,41(3):50-61.
[14] Juan E S,Sanchez A,Del Monte A,et al.Laboratory screening for air Injection-Based IOR in two waterflooded light oil reservoirs[J].The Journal of Canadian Petroleum Technology,2005,44(1):31-41.
[15] Moore R G,Laureshen C J,Ursenbach M G,et al.Combustion/oxidation behavior of athabasca oil sands bitumen[R].SPE 59483,1996.
[16] Greaves M,Ren S R,Rathbone R R.Air injection technique(LTO process)for IOR from light oil reservoirs: oxidation rate and displacement studies[R].SPE 40062,1998.
[17] Greaves M,Bentaher A H.Exothermicity characteristics of Wolf Lake heavy oil,Athabasca tar sand and Clair medium heavy oil[J]. Journal of Canadian Petroleum Technology,2007,46(9):16-19.
[18] Santos RG,Vargas J,Trevisan OV.Thermal analysis and combustion kinetic of heavy oils[EB/OL].[2011-03-15].http://www.worldheavyoilcongress.com/library.
[19] Jha K,Verkoczy B.The role of thermal analysis techniques in the in-situ combustion process[R].SPE 12677,1986.
[20] 杜建芬,郭平,王仲林,等.轻质油藏高压注空气加速量热分析实验研究[J].西南石油大学学报,2007,29(2):17-21.
Du Jianfen,Guo Ping,Wang Zhonglin,et al.Laboratory research of accelerating rate calorimeter test of high-pressure air injection at light oil reservoirs[J].Journal of Southwest Petroleum University,2007,29(2):17-21.

高压近绝热量热法获取原油氧化动力学参数

Determination of oxidation kinetics parameters for crude oil using high pressure and near adiabatic calorimetry method

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	宋显民, 杨辉, 柳军, 黄祥, 付军, 郭晓强, 李国永, 段健. 大斜度井投捞系统动力学模型及力学特性[J]. 石油学报, 2021, 42(5): 677-685.
[2]	杨海军, 李勇, 唐雁刚, 雷刚林, 周鹏, 周露, 许安明, 郇志鹏, 朱文慧, 陈维力, 胡春雷, 杨敬博. 塔里木盆地克深气田成藏条件及勘探开发关键技术[J]. 石油学报, 2021, 42(3): 399-414.
[3]	游利军, 康毅力, 周洋, 陈强, 程秋洋, 徐洁明, 陈杨. 油气储层氧敏性概念、机理与意义[J]. 石油学报, 2021, 42(2): 186-197.
[4]	祝效华, 罗云旭, 刘伟吉, 高锐, 贾玉丹, 刘呈君. 等离子体电脉冲钻井破岩机理的电击穿实验与数值模拟方法[J]. 石油学报, 2020, 41(9): 1146-1162.
[5]	斯尚华, 赵靖舟, 邹国亮, 李军, 孟祥宁, 刘超. 原油包裹体中芳香烃组分类型与成熟度关系——以三肇凹陷扶余油层为例[J]. 石油学报, 2020, 41(7): 835-840,864.
[6]	田继先, 李剑, 曾旭, 孔骅, 沙威, 郭泽清, 张静, 付艳双. 柴达木盆地东坪地区原油裂解气的发现及成藏模式[J]. 石油学报, 2020, 41(2): 154-162,255.
[7]	王业飞, 钱程, 姬宗江, 颜菲, 杨震, 丁名臣, 陈五花. 亚硝酸钠与氯化铵体系的反应特征[J]. 石油学报, 2020, 41(2): 226-234.
[8]	罗成波, 蒋祖军, 李皋, 何龙, 孟英峰, 欧彪, 肖国益, 严焱诚, 王希勇. QL1井井底突发性岩爆动力学机理及动态演化过程[J]. 石油学报, 2020, 41(2): 244-252.
[9]	赵靖舟, 孟选刚, 韩载华. 近源成藏——来自鄂尔多斯盆地延长组湖盆东部“边缘”延长组6段原油的地球化学证据[J]. 石油学报, 2020, 41(12): 1513-1526.
[10]	蒲春生, 郑恒, 杨兆平, 高振东. 水平井分段体积压裂复杂裂缝形成机制研究现状与发展趋势[J]. 石油学报, 2020, 41(12): 1734-1743.
[11]	刘金水, 李树霞, 秦兰芝, 易琦, 陈晓东, 康世龙, 沈文超, 邵龙义. 东海盆地西湖凹陷古近系煤的生烃动力学[J]. 石油学报, 2020, 41(10): 1174-1187,1218.
[12]	徐旺林, 胡素云, 李宁熙, 魏新善, 高建荣, 赵振宇, 李相博, 刘俊榜, 张月巧, 宋微. 鄂尔多斯盆地奥陶系中组合内幕气源特征及勘探方向[J]. 石油学报, 2019, 40(8): 900-913.
[13]	陈建平, 陈建军, 倪云燕, 范铭涛, 廖凤蓉, 魏军, 韩永科. 酒泉盆地酒西坳陷原油油源[J]. 石油学报, 2019, 40(7): 761-776.
[14]	杨海风, 王德英, 高雁飞, 王军, 李正宇, 钱赓. 渤海湾盆地盆缘洼陷新近系天然气成因与油气差异富集机理——以黄河口凹陷东洼为例[J]. 石油学报, 2019, 40(5): 509-518.
[15]	李子丰. 油气井管柱冲击动力问题研究概况和发展趋势[J]. 石油学报, 2019, 40(5): 604-610.