人工举升技术现状与发展趋势

doi:10.7623/syxb201511014

石油学报 ›› 2015, Vol. 36 ›› Issue (11): 1441-1448.DOI: 10.7623/syxb201511014

人工举升技术现状与发展趋势

刘合¹, 郝忠献¹, 王连刚², 曹刚³

1. 中国石油勘探开发研究院北京 100083;
2. 中国石油勘探与生产公司北京 100007;
3. 大庆油田有限责任公司采油工艺研究院黑龙江大庆 163453

收稿日期:2015-06-06 修回日期:2015-09-12 出版日期:2015-11-25 发布日期:2015-12-05
通讯作者: 刘合,男,1961年3月生,1982年获大庆石油学院学士学位,2002年获哈尔滨工程大学博士学位,现为中国石油勘探开发研究院教授级高级工程师,主要从事低渗透油气藏增产改造、机采系统提高系统效率、分层注水和井筒工程控制技术等方面的科研工作。Email:liuhe@petrochina.com.cn
作者简介:刘合,男,1961年3月生,1982年获大庆石油学院学士学位,2002年获哈尔滨工程大学博士学位,现为中国石油勘探开发研究院教授级高级工程师,主要从事低渗透油气藏增产改造、机采系统提高系统效率、分层注水和井筒工程控制技术等方面的科研工作。Email:liuhe@petrochina.com.cn
基金资助:
中国石油天然气集团公司重大科技项目"采油及井下作业新技术新装备研究与现场试验"(2014B-1700)资助。

Current technical status and development trend of artificial lift

Liu He¹, Hao Zhongxian¹, Wang Liangang², Cao Gang³

1. PetroChina Research Institute of Petroleum Exploration and Development, Beijing 100083, China;
2. PetroChina Exploration & Production Company, Beijing 100007, China;
3. Production Engineering Research Institute of Daqing Oilfield Limited Company, Heilongjiang Daqing 163453, China

Received:2015-06-06 Revised:2015-09-12 Online:2015-11-25 Published:2015-12-05

摘要/Abstract

摘要：

人工举升是采油工程的关键技术环节,经过几十年的发展,形成了抽油机、螺杆泵、电潜泵、气举等多项举升技术,满足了常规采油的需要,但同时也存在着效率低、能耗高、检泵周期短等系列问题。随着油井举升工况越来越复杂,采油成本不断上升,促使人工举升朝着更加高效、节能、环保、可靠的方向发展。结合不同的油井举升难题,应开展针对性技术研究:攻关同井注采技术,以解决高含水油井无效水循环难题;开发电潜往复柱塞泵等无杆举升技术,以解决油井杆管偏磨、能耗高难题;研发新材料和新工艺,以解决特殊流体举升难题等;研究油井举升优化配套技术,以提高举升工况监测和诊断水平、实现人工举升提效、降低采油成本。

关键词: 人工举升, 节能降耗, 技术现状, 发展趋势, 无杆举升

Abstract:

Artificial lift is a key technical link in oil production engineering. With several decades of development, several lift technologies have been formed, such as pumping unit, progressing cavity pump, electrical submersible pump and gas lift, which have satisfied the requirements for regular oil production. However, a series of problems still exist, such as low efficiency, high energy consumption and short pump detection period. Due to the more and more complex working conditions of artificial lift in oil wells, oil production cost is increasing constantly, thus promoting the development of artificial lift towards the directions of higher efficiency, energy conservation, environmental protection and reliability. Facing various difficulties in artificial lift for different oil wells, corresponding technical researches should be carried out, i.e., injection and production in the same well should be achieved to avoid invalid water cycle in high-water-cut oil wells; rodless lift technologies like electric submersible reciprocating plunger pump should be developed to solve eccentric wear and high energy consumption problems for well rods and tubes; new materials and technologies should be developed to solve difficulties in lifting special fluids; assorted techniques for optimization of lift technologies should be investigated to improve the monitoring and diagnose level of lift working conditions, thus enhancing the efficiency of artificial lift and cutting down oil production cost.

Key words: artificial lift, energy-saving and cost-reducing, technical status, development trend, rodless lift

中图分类号:

TE355.5

刘合, 郝忠献, 王连刚, 曹刚. 人工举升技术现状与发展趋势[J]. 石油学报, 2015, 36(11): 1441-1448.

Liu He, Hao Zhongxian, Wang Liangang, Cao Gang. Current technical status and development trend of artificial lift[J]. Acta Petrolei Sinica, 2015, 36(11): 1441-1448.

参考文献

[1] Liu He,Pei Xiaohan,Peng Baiqi,et al.The mechanism of PCP wells' tubing and rod wear issue in polymer flooding in Daqing Oil Field[R].SPE 113114,2008.
[2] 王岩楼,张传绪,于俊波,等.低渗透油田机械采油节能降耗技术[M].北京:石油工业出版社,2010:1-101.
Wang Yanlou,Zhang Chuanxu,Yu Junbo,et al.Low permeability oil field machinery production energy saving technology[M].Beijing:Petroleum Industry Press,2010:1-101.
[3] 姜民政,李杨,王慧,等.直线电机抽油泵系统试验研究[J].石油矿场机械,2012,41(5):60-63.
Jiang Minzheng,Li Yang,Wang Hui,et al.Experimental study of linear motor pumping unit[J].Oil Field Equipment,2012,41(5):60-63.
[4] 崔俊国,肖文生,董维彬,等.电动机直驱抽油机的研制及试验[J].石油机械,2012,40(10):81-83.
Cui Junguo,Xiao Wensheng,Dong Weibin,et al.Development and test of electric motor direct drive pumping unit[J].China Petroleum Machinery,2012,40(10):81-83.
[5] 李兆涛,都丽华,赵世新,等.扶余油田浅层定向井举升工艺技术[J].油气田地面工程,2012,31(2):25-26.
Li Zhaotao,Du Lihua,Zhao Shixin,et al.Research on lifting technique for shallow directional well in Fuyu Oilfield[J].Oil-Gasfield Surface Engineering,2012,31(2):25-26.
[6] 曲占庆,李小龙,程宇辉,等.增油短节提高抽油杆系统效率机理研究及其应用[J].断块油气田,2014,21(1):133-136.
Qu Zhanqing,Li Xiaolong,Cheng Yuhui,et al.Mechanism and its application of rod system efficiency promotion by stimulative nipple[J].Fault-Block Oil & Gas Field,2014,21(1):133-136.
[7] 王卫忠.斜井抽油杆柱防偏磨工艺技术研究与应用[J].石油天然气学报,2010,32(4):331-333.
Wang Weizhong.Research and application of rod string eccentric wear prevention technology in deviated wells[J].Journal of Oil and Gas Technology,2010,32(4):331-333.
[8] Chevelcha E,Langbauer C J,Hofstätter H.Buckling prevention using the tensioning device[R].SPE 165013,2013.
[9] 杨野.大庆油田机械采油节能技术现状及展望[J].机电工程技术,2010,39(11):132-135.
Yang Ye.Review and outlook of artificial lift energy saving technology in Daqing oilfield[J].Mechanical & Electrical Engineering Technology,2010,39(11):132-135.
[10] 操建平,孟庆昆,王向东,等.等壁厚与常规井下螺杆泵对比分析[J].石油机械,2011,39(6):4-7.
Cao Jianping,Meng Qingkun,Wang Xiangdong,et al.A comparative analysis of the equal-wall thickness downhole screw pump and the normal downhole screw pump[J].China Petroleum Machinery,2011,39(6):4-7.
[11] 师国臣,陈杰,曹刚,等.等壁厚螺杆泵脱胶机理数值模拟研究[J].固体力学学报,2014,35(S1):141-146.
Shi Guochen,Chen Jie,Cao Gang,et al.Finite element numerical simulation for adhesive failure of progressive cavity pump with stator of even thickness[J].Chinese Journal of Solid Mechanics,2014,35(S1):141-146.
[12] Schlumberger.电潜泵技术新进展[EB/OL].http://www.slb-sis.com.cn/toc/2006/2006-winter-3.pdf.
[13] Goddard C,Cuadros E,Mitrut I,et al.Past,present and future developments in CT ESP technology in the Al rayyan field[R].SPE 13675,2009.
[14] 宋显民,刘清友,孙成林,等.大斜度井钢丝投捞式气举采油技术[J].石油学报,2014,35(5):979-986.
Song Xianmin,Liu Qingyou,Sun Chenglin,et al.Gas-lift production technology of wire casting and fishing in highly deviated wells[J].Acta Petrolei Sinica,2014,35(5):979-986.
[15] 张建军,师俊峰,赵瑞东.油气井生产系统优化设计与诊断决策软件(PetroPE) V1.0[J].石油科技论坛,2013(5):55-57.
Zhang Jianjun,Shi Junfeng,Zhao Ruidong.Optimized design of oil and gas well production system and diagnostic and decision-making software (PetroPE) V1.0[J].Oil Forum, 2013(5):55-57.
[16] 余金泽,彭永刚,关成尧,等."功图量油"技术的发展[J].中国石油和化工,2009(4):51-54.
Yu Jinze,Peng Yonggang,Guan Chengrao,et al.The development of SLYMUDC[J].China Petroleum and Chemical Industry,2009(4):51-54.
[17] 吴晓东,张建军,韩国庆,等.油气井生产系统优化设计与诊断决策软件[J].西安石油大学学报:自然科学版, 2015,30(1):105-110.
Wu Xiaodong,Zhang Jianjun,Han Guoqing,et al.Research and application of optimization design and diagnosis decision software of oil&has well production system[J].Journal of Xi'an Shiyou University:Natural Science Edition,2015,30(1):105-110.
[18] 董世民,邢明明,张红,等.基于系统效率最高的抽油机井合理流压研究[J].燕山大学学报,2011,35(4):296-301.
Dong Shimin,Xing Mingming,Zhang Hong,et al.Study of reasonable flowing pressure of rod pumping wells based on maximum system efficiency[J].Journal of Yanshan University,2011,35(4):296-301.
[19] 姚春东,苏艳玲,冷陆游.电潜泵井系统效率的仿真模型[J].石油机械,2013,41(5):64-68.
Yao Chundong,Su Yanling,Leng Luyou.Simulation model of ESP well system efficiency[J].China Petroleum Machinery,2013,41(5):64-68.
[20] 王德民.强化采油方面的一些新进展[J].大庆石油学院学报,2010,34(5):19-26.
Wang Demin.New developments in improved oil recovery[J].Journal of Daqing Petroleum Institute,2010,34(5):19-26.
[21] 赵传伟,李增亮,董祥伟,等.井下双级串联式水力旋流器数值模拟与实验[J].石油学报,2014,35(3):551-557.
Zhao Chuanwei,Li Zengliang,Dong Xiangwei,et al.Numerical simulation and experiment of downhole two-stage tandem hydrocyclone[J].Acta Petrolei Sinica,2014,35(3):551-557.
[22] 王思淇.井下油水分离同井注采技术现场试验[J].油气田地面工程,2014,33(11):28-29.
Wang Siqi.The application of Downhole oil-water separation technique[J].Oil-Gas Field Surface Engineering,2014,33(11):28-29.
[23] Cao Gang,Huang Youquan,Ge Dongyuan,et al.A unique electrical submersible reciprocating pumping (ESRP) system design applied in unconventional oilfield[R].SPE 153123,2012.
[24] Saveth K J.Case histories of running progressing cavity pumps with submersible permanent magnet motors[R]. SPE 165654,2013.
[25] Refai A,Abdou H A M,Seleim A,et al.Permanent magnet motor application for ESP artificial lift[R].SPE 164666,2013.
[26] Sagalovskiy A,Ayala C A,Osorio L E S.Field experience with the application and operation of permanent magnet motors in the ESP industry:success stories and lessons learned[R].SPE 165030,2013.
[27] 刘合.用哲学的思维提升采油工程技术管理水平[J].中国工程科学,2013,15(11):31-35.
Liu He.Enhancing the management of oil production engineering with philosophical thinking[J].Engineering Sciences, 2013,15(11):31-35.
[28] 程杰成,吴军政,胡俊卿.三元复合驱提高原油采收率关键理论与技术[J].石油学报,2014,35(2):310-318.
Cheng Jiecheng,Wu Junzheng,Hu Junqing.Key theories and technologies for enhanced oil recovery of alkaline/surfactant/polymer flooding[J].Acta Petrolei Sinica,2014,35(2):310-318.
[29] 栾中伟,施珠华,李权,等.聚驱油井防偏磨技术研究与应用[J].石油机械,2012,40(6):91-94.
Luan Zhongwei,Shi Zhuhua,Li Quan,et al.Research and application of the eccentric wear preventing technology for polymer flooding well[J].China Petroleum Machinery, 2012,40(6):91-94.
[30] Noonan S G,Yip C M,Klaczek W,et al.Technical challenges and learnings from a high temperature metallic progressing cavity pump test[R].SPE 165668,2013.
[31] Noonan S G,Baugh A R,Wonitoy K,et al.Got Steam? Understanding ESP steam handling capabilities in the centrifugal pump[R].SPE 165432,2013.
[32] Wang Tongbin,Shen Zejun,Pei Xiaohan,et al.Vane pump-another promising artificial lift form?[R].SPE 158429,2012.
[33] Liu He,Bi Yong,Shi Guochen,et al.The development of PCP wells troubleshooting technique in Daqing oil field[R].SPE 113094,2008.
[34] Cudmore J.Using real time automated optimisation & diagnosis to manage an artificially lifted reservoir-a case study[R].SPE 160650,2012.
[35] Rowlan O L,McCoy J N,Becker D J,et al.Efficient and accurate monitoring of rod pump well performance using real time data processing and visualization[R].SPE 164485,2013.
[36] Hofstaetter H,Chevelcha E,Langbauer C J,et al.Listening sucker rod pumps:stroke's signature[R].SPE 165035,2013.
[37] 冯垚,杨继忠,廖建春.我国数字化抽油机的发展与应用现状[J].化工管理,2014(29):9-10.
Feng Yao,Yang Jizhong,Liao Jianchun.The devemopmeng and application of digital pumping unit in China[J].Chemical Enterprise Management,2014(29):9-10.

人工举升技术现状与发展趋势

Current technical status and development trend of artificial lift

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 9

编辑推荐

Metrics

本文评价

[1]	李杰训, 赵忠山, 李学军, 王梓栋, 李娜. 大庆油田聚合物驱配注工艺技术[J]. 石油学报, 2019, 40(9): 1104-1115.
[2]	李萍, 刘志龙, 邹剑, 刘海英, 于继飞, 范永涛. 渤海旅大27-2油田蒸汽吞吐先导试验注采工程[J]. 石油学报, 2016, 37(2): 242-247.
[3]	陈尚斌朱炎铭王红岩刘洪林魏伟罗跃李伍方俊华. 中国页岩气研究现状与发展趋势[J]. 石油学报, 2010, 31(4): 689-694.
[4]	赵政璋, 吴国干, 胡素云, 宋岩. 全球油气勘探新进展[J]. 石油学报, 2005, 26(6): 119-126.
[5]	胡见义, 陈英, 郑俊章. 东北亚天然气资源及其发展趋势[J]. 石油学报, 2003, 24(1): 1-8.
[6]	郑毅, 黄洪春. 中国煤层气钻井完井技术发展现状及发展方向[J]. 石油学报, 2002, 23(3): 81-85.
[7]	周明卿, 李秀元, 张琪, 樊灵. 喷射泵有杆泵接替举升工艺探讨[J]. 石油学报, 1999, 20(4): 74-77.
[8]	李颖川, 朱家富, 秦勇. 排水采气井油管和环空两相流压降优化模型[J]. 石油学报, 1999, 20(2): 87-92.
[9]	范江, 张子香. 利用水平井改善薄油层开发效果[J]. 石油学报, 1995, 16(2): 56-62.