考虑材料非线性的环空增压预测模型

doi:10.7623/syxb202002009

石油学报 ›› 2020, Vol. 41 ›› Issue (2): 235-243.DOI: 10.7623/syxb202002009

考虑材料非线性的环空增压预测模型

王黎松, 高宝奎, 胡天祥, 马超, 王捷力

中国石油大学(北京)石油工程学院北京 102249

收稿日期:2019-10-10 修回日期:2020-01-06 出版日期:2020-02-25 发布日期:2020-03-09
通讯作者: 高宝奎,男,1965年10月生,1987获兰州大学学士学位,2006年获中国石油大学(北京)博士学位,现为中国石油大学(北京)研究员,主要从事油气井管柱安全分析的研究。Email:gaobaokui@126.com
作者简介:王黎松,男,1993年11月生,2016年获西南石油大学学士学位,现为中国石油大学(北京)硕士研究生,主要从事油气井管柱力学方面的研究。Email:pewangls@163.com
基金资助:
国家重点基础研究发展计划（973）项目（2015CB251205）和国家科技重大专项（2017ZX05009）资助。

A prediction model of annular pressure build-up considering material nonlinearity

Wang Lisong, Gao Baokui, Hu Tianxiang, Ma Chao, Wang Jieli

College of Petroleum Engineering, China University of Petroleum, Beijing 102249, China

Received:2019-10-10 Revised:2020-01-06 Online:2020-02-25 Published:2020-03-09

摘要/Abstract

摘要：

为了准确预测深水油气井钻采过程中的环空增压，建立了改进的环空增压计算模型。该模型考虑了材料的非线性性质和套管变形的影响，其中材料的非线性性质包括了流体热膨胀系数和压缩系数随温度、压力变化的性质以及套管弹性模量、热膨胀系数随温度变化的性质。模型中的非线性函数由插值方法获得，并进行了实验验证和误差分析。计算中，将各个环空沿轴向进行分段，并将变温以增量的方式进行加载。通过算例，将该模型与忽略材料非线性性质和套管变形的简化模型进行了对比，讨论了各非线性参数及井筒变温对环空增压预测结果的影响。结果表明，与改进模型相比，简化模型的误差范围为2.51%~26.11%；在变温较小的深水井中，同时忽略材料非线性和套管变形对环空增压影响较小；而井筒变温较大时，忽略材料非线性后造成的环空增压预测误差非常显著；流体膨胀系数对环空增压的预测结果影响最大，若将流体膨胀系数取为常数，则误差达到70%。

关键词: 深水井, 圈闭压力, 环空压力, 密闭环空, 井筒温度

Abstract:

To accurately predict the annulus pressure build-up (APB)during the drilling and production of deepwater oil and gas wells, the paper establishes an improved APB calculation model. The model considers the impacts of nonlinear properties of the material and casing deformation. The nonlinear properties of the material include the variations of thermal expansion coefficient and compression coefficient of fluid with temperature and pressure, and the variations of elastic modulus and thermal expansion coefficient of casing with temperature. The nonlinear function in the model is obtained by interpolation method, and this study also performs experimental verification and error analysis. During calculation, each annulus is segmented in the axial direction, and the variable temperature is loaded in an incremental manner. Through an example, this model is compared with a simplified model that ignores material nonlinearity and casing deformation; additionally, the effects of various nonlinear parameters and variable temperature of wellbore on the prediction results of APB is explored. The results show that compared with the improved model, the error range of the simplified model is 2.51% -26.11%; in deepwater wells with a small range of variable temperature, ignoring material nonlinearity and casing deformation has a small influence on APB; within a large range of variable temperature, the prediction error of APB caused by neglecting material nonlinearity is very significant; the expansion coefficient of fluid has the greatest influence on the prediction result of APB. If the expansion coefficient of fluid is taken as a constant, the error may reach 70%.

Key words: deepwater well, trapped annular pressure, annulus pressure, closed annulus, wellbore temperature

中图分类号:

TE53

王黎松, 高宝奎, 胡天祥, 马超, 王捷力. 考虑材料非线性的环空增压预测模型[J]. 石油学报, 2020, 41(2): 235-243.

Wang Lisong, Gao Baokui, Hu Tianxiang, Ma Chao, Wang Jieli. A prediction model of annular pressure build-up considering material nonlinearity[J]. Acta Petrolei Sinica, 2020, 41(2): 235-243.

参考文献

[1] DONG Guangjian,CHEN Ping.A review of the evaluation methods and control technologies for trapped annular pressure in deepwater oil and gas wells[J].Journal of Natural Gas Science and Engineering,2017,37:85-105.
[2] BRADFORD D W,FRITCHIE JR D G,GIBSON D H,et al.Marlin failure analysis and redesign:part 1-description of failure[J].SPE Drilling & Completion,2004,19(2):104-111.
[3] 于晓聪,杨进,阚长宾,等.深水井筒环空圈闭压力单向控制机理[J].石油学报,2018,39(3):335-340.
YU Xiaocong,YANG Jin,KAN Changbin,et al.Unidirectional control mechanism of annulus trapped pressure in deepwatershaft[J].Acta Petrolei Sinica,2018,39(3):335-340.
[4] 胡志强,杨进,路保平,等.深水泡沫套管静水压载特性与压力控制机理[J].石油学报,2019,40(6):726-733.
HU Zhiqiang,YANG Jin,LU Baoping,et al.Hydrostatic pressure characteristics and pressure control mechanism of foam casing in deepwaterwells[J].Acta Petrolei Sinica,2019,40(6):726-733.
[5] ZHANG Bo,GUAN Zhichuan,LU Nu,et al.Trapped annular pressure caused by thermal expansion in oil and gas wells:a review of prediction approaches,risk assessment and mitigation strategies[J].Journal of Petroleum Science and Engineering,2019,172:70-82.
[6] KLEMENTICH E F,JELLISON M J.A service-life model for casing strings[J].SPE Drilling Engineering,1986,1(2):141-152.
[7] ADAMS A.How to design for annulus fluid heat-up[R].SPE 22871,1991.
[8] HALAL A S,MITCHELL R F.Casing design for trapped annular pressure buildup[J].SPE Drilling & Completion,1994,9(2):107-114.
[9] OUDEMAN P,BACARREZA L J.Field trial results of annular pressure behavior in a high-pressure/high-temperature well[J].SPE Drilling & Completion,1995,10(2):84-88.
[10] 高宝奎.高温引起的套管附加载荷实用计算模型[J].石油钻采工艺,2002,24(1):8-10.
GAO Baokui.Practical model for calculating the additional load on casing by high temperature[J].Oil Drilling & Production Technology,2002,24(1):8-10.
[11] OUDEMAN P,KEREM M.Transient behavior of annular pressure build-up in HP/HT wells[J].SPE Drilling & Completion,2006,21(4):234-241.
[12] ELLIS R C,FRITCHIE JR D G,GIBSON D H,et al.Marlin failure analysis and redesign; part 2,redesign[R].SPE 74529,2002.
[13] HASAN R,IZGEC B,KABIR S.Sustaining production by managing annular-pressure buildup[J].SPE Production & Operations,2010,25(2):195-203.
[14] 黄小龙,严德,田瑞瑞,等.深水套管环空圈闭压力计算及控制技术分析[J].中国海上油气,2014,26(6):61-65.
HUANG Xiaolong,YAN De,TIAN Ruirui,et al.Research on calculation of casing annulus trapped pressure and its control techniques for deep water well[J].China Offshore Oil and Gas,2014,26(6):61-65.
[15] 杨进,唐海雄,刘正礼,等.深水油气井套管环空压力预测模型[J].石油勘探与开发,2013,40(5):616-619.
YANG Jin,TANG Haixiong,LIU Zhengli,et al.Prediction model of casing annulus pressure for deepwater well drilling and completion operation[J].Petroleum Exploration and Development,2013,40(5):616-619.
[16] 张波,管志川,张琦.深水油气井开采过程环空压力预测与分析[J].石油学报,2015,36(8):1012-1017.
ZHANG Bo,GUAN Zhichuan,ZHANG Qi.Prediction and analysis on annular pressure of deepwater well in the production stage[J].Acta Petrolei Sinica,2015,36(8):1012-1017.
[17] AI Shuang,CHENG Linsong,HUANG Shijun,et al.A critical production model for deep HT/HP gas wells[J].Journal of Natural Gas Science and Engineering,2015,22:132-140.
[18] 董星亮,刘书杰,谢仁军,等.套管封固段变形对高温高压井环空圈闭压力影响规律[J].石油钻采工艺,2016,38(6):782-786.
DONG Xingliang,LIU Shujie,XIE Renjun,et al.Casing deformation of cemented portions effect on the annular pressure buildup for hthp gas wells[J].Oil Drilling & Production Technology,2016,38(6):782-786.
[19] 吴雪婷,王江帅,冯炜.深水油气井环空圈闭压力研究[J].石油机械,2018,46(12):47-50.
WU Xueting,WANG Jiangshuai,FENG Wei.Research on annular pressure buildup in deepwater oil and gas well[J].China Petroleum Machinery,2018,46(12):47-50.
[20] YIN Fei,GAO Deli.Improved calculation of multiple annuli pressure buildup in subsea HPHT wells[R].SPE 170553,2014.
[21] LIU Jinge,FAN Honghai,PENG Qi,et al.Research on the prediction model of annular pressure buildup in subsea wells[J].Journal of Natural Gas Science and Engineering,2015,27:1677-1683.
[22] HAYNES W M.Handbook of chemistry and physics[M].95th ed.New York:CRC Press,2014:6-1-6-4.
[23] 张明.应用数值分析[M].4版.北京:石油工业出版社,2012.
ZHANG Ming.Applied numerical analysis[M].4th ed.Beijing:Petroleum Industry Press,2012.
[24] BEVINGTON P R,ROBINSON D K.Data reduction and error analysis for physical sciences[M].3rd ed.New York:McGraw-Hill Companies,2003.
[25] PLACIDO J C R,ADEMAR JR P,PAULO L A B F,et al.Stress-analysis of casing string submitted to cyclic steam injection[R].SPE 38978,1997.
[26] 王兆会,高宝奎,高德利.注汽井套管热应力计算方法对比分析[J].天然气工业,2005,25(3):93-95.
WANG Zhaohui,GAO Baokui,GAO Deli.Calculation method of casing thermal stress in steam injection well and its correlation analysis[J].Natural Gas Industry,2005,25(3):93-95.
[27] WANG Lisong,GAO Baokui,GAO Liang,et al.Prediction of annular pressure caused by thermal expansion by considering the variability of fluid properties[J].Applied Thermal Engineering,2018,141:234-244.
[28] 盖秉正.弹性力学(下)[M].哈尔滨:哈尔滨工业大学出版社,2009:480-484.
GE Bingzheng.Elasticity mechanics (volume two)[M].Harbin:Harbin Institute of Technology Press,2009:480-484.
[29] 徐芝纶.弹性力学(上册)[M].4版.北京:高等教育出版,2006:75-76.
XU Zhilun.Elasticity mechanics(volume one)[M].4th ed.Beijing:Higher Education Press:2006:75-76.
[30] 畅元江,王健,李家仪,等.考虑温度影响的水下井口疲劳损伤计算方法[J].石油学报,2019,40(4):482-492.
CHANG Yuanjiang,WANG Jian,LI Jiayi,et al.Calculation method of subsea wellhead fatigue damage considering thermal effect[J].Acta Petrolei Sinica,2019,40(4):482-492.
[31] 魏纳,孙万通,孟英峰,等.海洋天然气水合物藏钻探环空相态特性[J].石油学报,2017,38(6):710-720.
WEI Na,SUN Wantong,MENG Yingfeng,et al.Annular phase behavior analysis during marine natural gas hydrate reservoir drilling[J].Acta Petrolei Sinica,2017,38(6):710-720.

考虑材料非线性的环空增压预测模型

A prediction model of annular pressure build-up considering material nonlinearity

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 9

编辑推荐

Metrics

本文评价

[1]	胡志强, 杨进, 路保平, 侯绪田, 黄小龙, 巩立根, 李文龙, 李舒展. 深水泡沫套管静水压载特性与压力控制机理[J]. 石油学报, 2019, 40(6): 726-733.
[2]	畅元江, 王健, 李家仪, 聂振宇, 张伟国, 许亮斌, 刘秀全, 陈国明. 考虑温度影响的水下井口疲劳损伤计算方法[J]. 石油学报, 2019, 40(4): 482-492.
[3]	于晓聪, 杨进, 阚长宾, 胡昌蓬, 吴旭东, 许发宾, 张超, 李磊, 黄亮. 深水井筒环空圈闭压力单向控制机理[J]. 石油学报, 2018, 39(3): 335-340,364.
[4]	魏纳, 孙万通, 孟英峰, 周守为, 付强, 郭平, 李清平. 海洋天然气水合物藏钻探环空相态特性[J]. 石油学报, 2017, 38(6): 710-720.
[5]	郭建春, 曾冀, 张然, 周长林. 井筒注二氧化碳双重非稳态耦合模型[J]. 石油学报, 2015, 36(8): 976-982.
[6]	张波, 管志川, 张琦. 深水油气井开采过程环空压力预测与分析[J]. 石油学报, 2015, 36(8): 1012-1017.
[7]	杨　谋孟英峰李　皋邓建民赵向阳 . 钻井全过程井筒-地层瞬态传热模型[J]. 石油学报, 2013, 34(2): 366-371.
[8]	宋洵成管志川. 深水钻井井筒全瞬态传热特征[J]. 石油学报, 2011, 32(4): 704-708.
[9]	彭轩, 刘蜀知, 蔡长宇, 刘福健, 张洪丽. 高凝油油藏自生热压裂井筒温度场计算模型[J]. 石油学报, 2003, 24(4): 69-72,76.