[1] 王新虎,薛继军,高蓉,等.钻杆内螺纹接头纵向开裂机理及材料性能指标研究[J].天然气工业,2007,27(4):69-71.
Wang Xinhu,Xue Jijun,Gao Rong,et al.Study on longitudinal fracture mechanism and material property indicators of box-ended drillpipe tool joint[J].Natural Gas Industry,2007,27(4):69-71.
[2] 张瑟,张国正,张春婉,等.双台肩钻杆接头开裂失效分析[J].石油矿场机械,2010,39(1):71-77.
Zhang Se,Zhang Guozheng,Zhang Chunwan,et al.SSC failure analysis of high strength double shouldered tool joint[J].Oil Field Equipment,2010,39(1):71-77.
[3] Tafreshi A.SIF evaluation and stress analysis of drillstring threaded joints[J].International Journal of Pressure Vessels and Piping,1999,76(2):91-103.
[LL]
[4] Baragetti S.Effects of taper variation on conical threaded connections load distribution[J].Journal of Mechanical Design,2002,124(2):320-329.
[5] 李斌,杨智春,于哲峰.钻柱接头扣型改进设计的有限元分析[J].机械强度,2006,28(5):721-724.
Li Bin,Yang Zhichun,Yu Zhefeng.Finite element analysis of improving designs for a drill string joint[J].Journal of Mechanical Strength,2006,28(5):721-724.
[6] Lin Yuanhua,Zhu Dajiang,Zeng Dezhi,et al.Numerical and experimental distribution of stress fields for double shoulder tool joint[J].Engineering Failure Analysis,2011,18(6):1584-1594.
[7] 祝效华,董亮亮,童华,等.拉弯复合载荷作用下的API短圆套管螺纹力学行为[J].石油学报,2013,34(1):157-163.
Zhu Xiaohua,Dong Liangliang,Tong Hua.Mechanical behaviors of short-round thread of the API casing under combined load of stretching and bending moment[J].Acta Petrolei Sinica,2013,34(1):157-163.
[8] Ogasawara M.Development of Nippon Steel Premium Connections[J].Nippon Steel Technical Report,1988,38:10-17.
[9] 练章华,杨龙,韩建增,等.套管偏梯形螺纹接头泄漏机理的有限元分析[J].石油矿场机械,2004,33(5):53-57.
Lian Zhanghua,Yang Long,Han Jianzeng,et al.Using finite element analysis on leakage mechanism for leaning thread in casing[J].Oil Field Equipment,2004,33(5):53-57.
[10] Bailey E,Petrella J,Smith J.Development of gas tight seal for tool joint[R].SPE 49202,1998.
[11] Bradley A B,Nagasaku S,Verger E.Premium connection design,testing,and installation for HPHT sour wells[R].SPE 97585,2005.
[12] 高连新,金烨,张居勤.石油套管特殊螺纹接头的密封设计[J].机械工程学报,2005,41(3):216-220.
Gao Lianxin,Jin Ye,Zhang Juqin.Seal design of premium threaded casing connections[J].Chinese Journal of Mechanical Engineering,2005,41(3):216-220.
[13] 张洪武,关振群,李云鹏,等.有限元分析与CAE技术基础[M].北京:清华大学出版社,2004:55.
Zhang Hongwu,Guan Zhenqun,Li Yunpeng,et al.Finite element analysis and CAE technology[M].Beijing:Tshinghua University Press,2004:55.
[14] 狄勤丰,陈锋,王文昌,等.双台肩钻杆接头三维力学分析[J].石油学报,2012,33(5):871-877.
Di Qinfeng,Chen Feng,Wang Wenchang,et al.Three-dimensional mechanical analysis of the double shouldered tool joint[J].Acta Petrolei Sinica,2012,33(5):871-877.
[15] 陈锋,狄勤丰,欧阳彦辉,等.双台肩钻杆接头副台肩间隙的优选[J].工程力学,2013,33(增刊1):353-357.
Chen Feng,Di Qinfeng,Ouyang Yanhui,et al.The influence of the clearance of secondary shoulder to the performance of double shoulder drill pipe joint[J].Engineering Mechanics,2013,33(Supplement 1):353-357. |