Efficiency analysis of sucker-rod pumping system and optimal design of swabbing parameter

doi:10.7623/syxb200505023

Editorial office of ACTA PETROLEI SINICA ›› 2005, Vol. 26 ›› Issue (5): 102-106.DOI: 10.7623/syxb200505023

• Petroleum Engineering • Previous Articles Next Articles

Efficiency analysis of sucker-rod pumping system and optimal design of swabbing parameter

LI Zhao-min¹, LIN Ri-yi^1,2, FU Lu-chang³, YU Tong-ying³, LIAN Jing-she³, LI Song-yan²

1. College of Petroleum Engineering, China University of Petroleum, Dongying 257061, China;
2. College of Transport & Storage and Civil Engineering, China University of Petroleum, Dongying 257061, China;
3. Shengli Production Plant, Sinopec Shengli Oilfield Company Limited, Dongying 257051, China

Received:2004-10-08 Revised:2005-01-26 Online:2005-09-25 Published:2010-05-21

有杆抽油系统效率分析及抽汲参数优化设计

李兆敏¹, 林日亿^1,2, 付路长³, 于同印³, 连经社³, 李松岩²

1. 中国石油大学石油工程学院, 山东, 东营, 257061;
2. 中国石油大学储运与建筑工程学院, 山东, 东营, 257061;
3. 中国石化胜利油田有限公司胜利采油厂, 山东, 东营, 257051

作者简介:李兆敏,男,1965年6月生,1995年获石油大学(北京)油气井工程专业博士学位,现为中国石油大学(华东)石油工程学院教授,博士生导师.E-mail:lizhm@mail.hdpu.edu.cn
基金资助:
山东省自然科学基金项目“非牛顿流体和传热的耦合理论及应用”(Y98A11014)资助

Abstract

Abstract: Aiming at the problem of low efficiency for sucker-rod pumping system and regarding the efficiency of mechanical oil recovery system as an optimal object,the object function and constrains for optimal design of mechanical oil recovery system were determined by analyzing energy consumptions of the sucker-rod pumping system.The optimal design method for sucker-rod pumping system and swabbing parameters was presented.This optimal design method had been used in the parameter optimization of old wells and the optimal design of new wells with mechanical oil recovery.The result of application in Shengli Production Plant showed that the average efficiency of mechanical oil recovery system with optimized parameters raised by 11.6%.The electric energy consumption of the optimally designed wells was greatly reduced,and the economic benefit was enhanced.

Key words: suckerrod pump, pumping system, efficiency, swabbing parameter, optimal design

摘要： 针对有杆泵往复抽汲采油方式使用广泛,但系统效率较低的实际情况,对有杆泵抽油系统进行了能量消耗分析,以机械采油系统效率最高为目标,确立了机械采油系统优化设计的目标函数和约束条件,给出了有杆泵抽油时机、杆、泵及抽汲参数的优化设计方法。该方法可应用于机抽油井的参数优化和新投产井的优化设计。胜利采油厂的应用实例表明,参数优化后油井的系统效率提高了11.6%,降低了综合成本,提高了经济效益。

关键词: 有杆泵, 抽油系统, 效率, 抽汲参数, 优化设计

CLC Number:

TE833.2

LI Zhao-min, LIN Ri-yi, FU Lu-chang, YU Tong-ying, LIAN Jing-she, LI Song-yan. Efficiency analysis of sucker-rod pumping system and optimal design of swabbing parameter[J]. Editorial office of ACTA PETROLEI SINICA, 2005, 26(5): 102-106.

李兆敏, 林日亿, 付路长, 于同印, 连经社, 李松岩. 有杆抽油系统效率分析及抽汲参数优化设计[J]. 石油学报, 2005, 26(5): 102-106.

[1]	Hu Jing, Guo Liaoyuan, Sun Gangzheng, Wu Xiaoling, Song Yongting, Lin Junzhang, Wang Weidong, Cao Yanbin, Wang Zenglin. Relationship between the growth and metabolism of indigenous microorganisms and oil displacement efficiency during dynamic displacement [J]. Acta Petrolei Sinica, 2020, 41(9): 1127-1134.
[2]	Xu Xiufen, Li Hongfei, Liu Guohao. A new method for calculating the efficiency of compressor set in gas stations [J]. Acta Petrolei Sinica, 2020, 41(8): 1019-1024.
[3]	Huang Xing, Ni Jun, Li Xiang, Xue Junjie, Bai Mingxing, Zhou Tong. Characteristics and influencing factors of CO₂ flooding in different microscopic pore structures in tight reservoirs [J]. Acta Petrolei Sinica, 2020, 41(7): 853-864.
[4]	Liu He, Lu Qiuyu, Zhu Shijia, Jiang Wei, Wang Suling. Application of typical clustering algorithms in analysis of system efficiency of pumping wells in blocks [J]. Acta Petrolei Sinica, 2020, 41(12): 1657-1664.
[5]	Ma Dade, Chen Yan, Xia Xiaomin, Wei Xuebin, Wu Yanxiong, Yuan Li, He Liu. Reservoir formation conditions and key exploration & development technoloiges in Yingdong oilfield, Q aidam Basin [J]. Acta Petrolei Sinica, 2019, 40(1): 115-130.
[6]	Jia Ru, Fu Xiaofei, Meng Lingdong, Gong Lei, Liu Zhida. Transformation mechanism of fault and its associated microstructures for different kinds of reservoirs [J]. Acta Petrolei Sinica, 2017, 38(3): 286-296.
[7]	Bi Gang, Li Gensheng, Qu Zhan, Niu Jilei, Huang Zhongwei, Xi Zhongchen, Dou Liangbin. Rock breaking efficiency of the self-propelled swirling jet bit [J]. Acta Petrolei Sinica, 2016, 37(5): 680-687.
[8]	Yu Siyu, Li Shaohua, He Youbin, Duan Taizhong, Lian Peiqing, Tao Jinyu, Bao Xing. Multiple-point geostatistics algorithm based on pattern scale-down cluster [J]. Acta Petrolei Sinica, 2016, 37(11): 1403-1409.
[9]	Ma Zhaogui, Zhao Gaishan, Wu Gangshan, Yue Chengqi, He Kai, Wang Peng. GPU-based porting and optimization of Kirchhoff pre-stack time migration [J]. ACTA PETROLEI SINICA, 2014, 35(4): 700-705.
[10]	Qiu Zhengsong, Zhang Shifeng, Huang Wei'an, Luo Xi. A novel aluminum-based shale/mudstone stabilizer and analysis of its mechanism for wellbore stability [J]. ACTA PETROLEI SINICA, 2014, 35(4): 754-758.
[11]	TIAN Jialin, LIANG Zheng, YANG Lin, DONG Chaoqun, LI Shuangshuang, FAN Zhe, PANG Xiaolin. A counter-balance method for energy efficiency calculation of the integral natural gas engine-compressor [J]. Editorial office of ACTA PETROLEI SINICA, 2013, 34(4): 787-791.
[12]	WANG Guo, LIU Jianhua, DING Chao, FAN Hongkang. Casing program optimization with the managed pressure drilling technique [J]. Editorial office of ACTA PETROLEI SINICA, 2013, 34(3): 545-549.
[13]	JIANG Xueyuan DONG Jiayu LI Yiqiang . Surface and interface chemical properties and microscopic oil displacement mechanism of the FPS-B agent in flooding [J]. Editorial office of ACTA PETROLEI SINICA, 2012, 33(6): 1023-1027.
[14]	TANG Mingyun SHI Anfeng WANG Xiaohong JIA Jiangtao . Numerical simulation of the effect of light component volatility on heavy-oil production by steam injection [J]. Editorial office of ACTA PETROLEI SINICA, 2012, 33(6): 1043-1048.
[15]	PEI Haihua　ZHANG Guicai　GE Jijiang　JIANG Ping. Mechanism of “droplet flow” in alkaline flooding for enhancing heavy-oil recovery [J]. Editorial office of ACTA PETROLEI SINICA, 2012, 33(4): 663-669.

Efficiency analysis of sucker-rod pumping system and optimal design of swabbing parameter

有杆抽油系统效率分析及抽汲参数优化设计

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments