[1] 裴峻峰,张嗣伟,齐明侠.钻井泵液力端故障诊断新方法[J].石油学报,2009,30(4):617-620.
Pei Junfeng,Zhang Siwei,Qi Mingxia.A new method for fault diagnosis of fluid end in drilling pump[J].Acta Petrolei Sinica,2009,30(4):617-620.
[2] Zhou Yi,Huang Zhiqiang,Bu Yan,et al.Simulation studies on drilling mud pump plunger seal failure under ultrahigh pressure and ultradeep conditions[J].Engineering Failure Analysis,2014,45:142-150.
[3] 刘茂,杨敏嘉,黄兆芝.泥浆泵橡胶活塞在工作压力下的位移场和应变场[J].石油学报,1984,5(1):99-106.
Liu Mao,Yang Minjia,Huang Zhaozhi.Study of two dimensional displacement field and strain field of slush pump piston by the moire method[J].Acta Petrolei Sinica,1984,5(1):99-106.
[4] Bacon W A.Consideration of Compressibility Effects for Applied back pressure Dynamic Well Control Response to a Gas Kick in Managed Pressure Drilling Operations[D].Arlington,USA:University of Texas,2011:1-113.
[5] Al-Katheeri A B,Kenawy M M,Metwali M H,et al.A successful deployment of LWD technique for water shut-off application,an integrated teamwork approach managed to activate horizontal wells economically[R].SPE 164192,2013.
[6] 陈锋,狄勤丰,王文昌,等.基于密封性能要求的超深井钻柱极限提升力的确定[J].石油学报,2013,34(6):1176-1180.
Chen Feng,Di Qinfeng,Wang Wenchang,et al.Determination of ultimate lifting capacity of drill string for ultra-deep wells based on sealing performance of tool joint[J].Acta Petrolei Sinica,2013,34(6):1176-1180.
[7] 常德玉,李根生,沈忠厚,等.深井超深井井底应力场[J].石油学报,2011,32(4):697-703.
Chang Deyu,Li Gensheng,Shen Zhonghou,et al.The stress field of bottom hole in deep and ultra-deep wells[J].Acta Petrolei Sinica,2011,32(4):697-703.
[8] 陈浩,王长江,吴震,等.安全钻井钻柱内防喷系统止回阀工作机理及失效分析[J].天然气工业,2010,30(6):69-72.
Chen Hao,Wang Changjiang,Wu Zhen,et al.Working mechanism and failure analysis of check valves of BOP (blowout preventer)system in drilling string for safe drilling[J].Natural Gas Industry,2010,30(6):69-72.
[9] 孔祥伟,林元华,邱伊婕.控压钻井中两步关阀阀芯所受瞬变压力研究[J].应用力学学报,2014,31(4):20-24.
Kong Xiangwei,Lin Yuanhua,Qiu Yijie.Study on transient pressure on valve core for two-step closing valve in mange pressure drilling[J].Chinese Journal of Applied Mechanics,2014,31(4):20-24.
[10] Crespo F E,Ahmed R M,Saasen A,et al.Surge-and-swab pressure predictions for yield-power-law drilling fluids[R].SPE 138938,2012.
[11] 汪海阁,苏义脑,刘希圣.幂律流体偏心环空波动压力数值解[J].石油学报,1998,19(3):104-109.
Wang Haige,Su Yi’nao,Liu Xisheng.Numerical analysis of steady surge pressure of power-law fluid in eccentric annulus[J].Acta Petrolei Sinica,1998,19(3):104-109.
[12] 苗长山,李增亮,李继志.混输泵扬程与流量特性曲线的理论分析[J].石油学报,2007,28(3):145-148.
Miao Changshan,Li Zengliang,Li Jizhi.Theoretical analysis on head-flow rate curves of multiphase pump[J].Acta Petrolei Sinica,2007,28(3):145-148.
[13] 马家骥.液力传动泥浆泵的正常工作条件[J].石油学报,1982,3 (2):81-89.
Ma Jiaji.Normal operating condition of mud pumps with torque converters[J].Acta Petrolei Sinica,1982,3(2):81-89.
[14] 马素霞.泵系统的瞬变流特性[M].北京:中国水利水电出版社,2007:1-165.
Ma Suxia.Transient flow characteristics of pump system[M].Beijing:China Water Conservancy and Hydropower Press,2007:1-165.
[15] 郑铭.泵的全面特性曲线在泵系统流动瞬变计算中应用[J].排灌机械,1997(3):30-34.
Zheng Ming.Application the full pump characteristics in flow transient calculation of pump systems[J].Drainage and Irrigation Machinery,1997(3):30-34.
[16] Zhang Yongliang,Miao Mingfei,Ma Jiming.Analytical study on water hammer pressure in pressurized conduits with a throttled surge chamber for slow closure[J].Water Science and Engineering,2010,3(2):174-189.
[17] 郝俊芳.平衡钻井与井控[M].北京:石油工业出版社,1992:1-226.
Hao Junfang.Balanced drilling and well control[M].Beijing:Petroleum Industry Press,1992:1-226.
[18] Wylie E B,Streeter V L.Fluid transients[M]. New York:McGraw-Hill International Book Company,1978:1-297.
[19] 孔祥伟,林元华,邱伊婕.微流量控压钻井中节流阀动作对环空压力的影响[J].石油钻探技术,2014,42(3):22-26.
Kong Xiangwei,Lin Yuanhua,Qiu Yijie.Effect of choke valve action on annular pressure with Micro-Flux control in MPD Drilling[J].Petroleum Drilling Techniques,2014,42(3):22-26.
[20] Watters G Z.Modern analysis and control of unsteady flow in pipelines[M].Ann-Arbor Michigan:Ann Arbor science Publishers Inc.,1979:1-246. |