[1] 熊正强,陶士先,蒋睿,等.抗高温随钻封堵材料研究进展[J].探矿工程(岩土钻掘工程),2016,43(12):33-36.
XIONG Zhengqiang,TAO Shixian,JIANG Rui,et al.Research progress of high temperature resistant loss circulation material while drilling[J].Exploration Engineering (Rock & Soil Drilling and Tunneling),2016,43(12):33-36.
[2] 刘春,张荣虎,张惠良,等.致密砂岩储层微孔隙成因类型及地质意义——以库车前陆冲断带超深层储层为例[J].石油学报,2017,38(2):150-159.
LIU Chun,ZHANG Ronghu,ZHANG Huiliang,et al.Genetic types and geological significance of micro pores in tight sandstone reservoirs:a case study of the ultra-deep reservoir in the Kuqa foreland thrust belt,NW China[J].Acta Petrolei Sinica,2017,38(2):150-159.
[3] 张以明,才博,何春明,等.超高温超深非均质碳酸盐岩储层地质工程一体化体积改造技术[J].石油学报,2018,39(1):92-100.
ZHANG Yiming,CAI Bo,HE Chunming,et al.Volume fracturing technology based on geo-engineering integration for ultra-high temperature and ultra-deep heterogeneous carbonate reservoir[J].Acta Petrolei Sinica,2018,39(1):92-100.
[4] AHMAD I,AKIMOV O,BOND P,et al.Drilling operations in HP/HT Environment[C]//Offshore Technology Conference-Asia.Kuala Lumpur,Malaysia:OTC,2014.
[5] 吴兴宁,寿建峰,张惠良,等.塔里木盆地寒武系-奥陶系层序格架中生储盖组合特征与勘探意义[J].石油学报,2012,33(2):225-231.
WU Xingning,SHOU Jianfeng,ZHANG Huiliang,et al.Characteristics of the petroleum system in Cambrian and Ordovician sequence frameworks of the Tarim Basin and its exploration significance[J].Acta Petrolei Sinica,2012,33(2):225-231.
[6] 庄新兵,顾忆,邵志兵,等.塔里木盆地地温场对油气成藏过程的控制作用——以古城墟隆起为例[J].石油学报,2017,38(5):502-511.
ZHUANG Xinbing,GU Yi,SHAO Zhibing,et al.Control effect of geothermal field on hydrocarbon accumulation process in Tarim Basin:a case study of Guchengxu uplift[J].Acta Petrolei Sinica,2017,38(5):502-511.
[7] 王磊.莺琼盆地高温高压对储层物性的影响研究[D].成都:成都理工大学,2013.
WANG Lei.Research on high temperature and high pressure effects on reservoir property of Yingqiong Basin[D].Chengdu:Chengdu University of Technology,2013.
[8] 杨东升,赵志刚,杨海长,等.深水崎岖海底区构造解释与圈闭落实——以琼东南盆地深水区宝岛凹陷为例[J].石油学报,2018,39(7):767-774.
YANG Dongsheng,ZHAO Zhigang,YANG Haizhang,et al.Structural interpretation and trap definition in the deep-water rugged seabed area:a case of Baodao sag,deep-water area of Qiongdongnan Basin[J].Acta Petrolei Sinica, 2018,39(7):767-774.
[9] 徐同台,刘玉杰,申威,等.钻井工程防漏堵漏技术[M].北京:石油工业出版社,1997.
XU Tongtai,LIU Yujie,SHEN Wei,et al.Technology of lost circulation resistance and control during drilling engineering[M].Beijing:Petroleum Industry Press,1997.
[10] 王明波,郭亚亮,方明君,等.裂缝性地层钻井液漏失动力学模拟及规律[J].石油学报,2017,38(5):597-606.
WANG Mingbo,GUO Yaliang,FANG Mingjun,et al.Dynamics simulation and laws of drilling fluid loss in fractured formations[J].Acta Petrolei Sinica,2017,38(5):597-606.
[11] SAVARI S,WHITFILL D L,KUMAR A.Resilient lost circulation material (LCM):a significant factor in effective wellbore strengthening[R].SPE 153154,2012.
[12] KUMAR A,SAVARI S,WHITFILL D.Wellbore strengthening:the less-studied properties of lost-circulation materials[R].SPE 133484,2010.
[13] JEENNAKORN M,NYGAARD R,NES O M,et al.Testing conditions make a difference when testing LCM[J].Journal of Natural Gas Science and Engineering,2017,46:375-386.
[14] ALSABA M,NYGAARD R,SAASEN A,et al.Experimental investigation of fracture width limitations of granular lost circulation treatments[J].Journal of Petroleum Exploration and Production Technology,2016,6(4):593-603.
[15] SCOTT P D,BEARDMORE D H,WADE Z L,et al.Size degradation of granular lost circulation materials[R].SPE 151227,2012.
[16] 邱正松,刘均一,周宝义,等.钻井液致密承压封堵裂缝机理与优化设计[J].石油学报,2016,37(S2):137-143.
QIU Zhengsong,LIU Junyi,ZHOU Baoyi,et al.Tight fracture-plugging mechanism and optimized design for plugging drilling fluid[J].Acta Petrolei Sinica,2016,37(S2):137-143.
[17] 邱正松,暴丹,刘均一,等.裂缝封堵失稳微观机理及致密承压封堵实验[J].石油学报,2018,39(5):587-596.
QIU Zhengsong,BAO Dan,LIU Junyi,et al.Microcosmic mechanism of fracture-plugging instability and experimental study on pressure bearing and tight plugging[J].Acta Petrolei Sinica,2018,39(5):587-596.
[18] 康毅力,许成元,唐龙,等.构筑井周坚韧屏障:井漏控制理论与方法[J].石油勘探与开发,2014,41(4):473-479.
KANG Yili,XU Chengyuan,TANG Long,et al.Constructing a tough shield around the wellbore:theory and method for lost-circulation control[J].Petroleum Exploration and Development,2014,41(4):473-479.
[19] XU Chengyuan,KANG Yili,CHEN Fei,et al.Analytical model of plugging zone strength for drill-in fluid loss control and formation damage prevention in fractured tight reservoir[J].Journal of Petroleum Science and Engineering,2017,149:686-700.
[20] 许成元,康毅力.基于颗粒物质力学的裂缝封堵层稳定性分析[C]//中国石油学会石油科技装备专业委员会钻井液完井液技术研讨会论文集.北京:中国石油学会,2011:126-131.
XU Chengyuan,KANG Yili.Stability analysis of fracture plugged zone based on granular matter mechanics[C]//Symposium of Drilling Fluid Completion Technology of Petroleum Equipment Committee of Chinese Petroleum Society.Beijing:Chinese Petroleum Society,2011:126-131.
[21] 段永贤,舒小波,李有伟,等.一种超深水平井堵漏材料室内评价研究[J].当代化工,2017,46(2):246-249.
DUAN Yongxian,SHU Xiaobo,LI Youwei,et al.Experimental evaluation research on a kind of ultra-deep horizontal well plugging material[J].Contemporary Chemical Industry,2017,46(2):246-249.
[22] 国家技术监督局.化学纤维单纤维断裂强力和断裂伸长的测定:GB/T 9997-1988[S].北京:中国标准出版社,1989.
State Technology Supervision Administration.Man-made fibres-Determination of breaking strength and elongation of individual fibres:GB/T 9997-1988[S].Beijing:Standards Press of China,1989.
[23] ZERIOUH A,BELKBIR L.Thermal decomposition of a Moroccan wood under a nitrogen atmosphere[J].Thermochimica Acta,1995,258:243-258.
[24] BYRNE C E,NAGLE D C.Carbonization of wood for advanced materials applications[J].Carbon,1997,35(2):259-266.
[25] 曲雯雯,夏洪应,彭金辉,等.核桃壳热解特性及动力学分析[J].农业工程学报,2009,25(2):194-198.
QU Wenwen,XIA Hongying,PENG Jinhui,et al.Pyrolysis characteristics and kinetic analysis of walnut shell[J].Transactions of the CSAE,2009,25(2):194-198.
[26] 吴晓羽,李硕,王仕峰.废旧轮胎热裂解技术的研究进展[J].特种橡胶制品,2015,36(6):71-75.
WU Xiaoyu,LI Shuo,WANG Shifeng.Progress in thermal pyrolysis of waste tires[J].Special Purpose Rubber Products,2015,36(6):71-75.
[27] 蒋玉川.普通强度高性能混凝土的高温性能特征[D].北京:北京交通大学,2007.
JIANG Yuchuan.Characteristics of normal-strength high-performance concrete exposed to high temperature[D].Beijing:Beijing Jiaotong University,2007.
[28] 艾正青,叶艳,刘举,等.一种多面锯齿金属颗粒作为骨架材料的高承压强度、高酸溶随钻堵漏钻井液[J].天然气工业,2017,37(8):74-79.
AI Zhengqing,YE Yan,LIU Ju,et al.A new plugging-while-drilling fluid of high bearing strength and acid solubility with multifaceted zigzag metal particles as a skeleton material[J].Natural Gas Industry,2017,37(8):74-79.
[29] KULKARNI S D,SAVARI S,GUPTA N,et al.Designing lost circulation material LCM pills for high temperature applications[R].SPE 180309,2016.
[30] 钱伯章.特种工程塑料发展现状和进展[J].化工新型材料,2005,33(1):1-5.
QIAN Bozhang.Current situation and progress of special engineering plastics[J].New Chemical Materials,2005,33(1):1-5.
[31] 荔栓红.N-苯基马来酰亚胺型高分子耐热改性剂合成技术及流变学研究[D].兰州:西北师范大学,2009.
LI Shuanhong.The synthesis technology and rheology study of heat-resistant macromolecule modified by N-phenyl maleimide[D].Lanzhou:Northwest Normal University,2009.
[32] 邓程方,邓凯桓.聚苯硫醚共混改性研究进展[J].塑料科技,2011,39(7):111-117.
DENG Chengfang,DENG Kaihuan.Research progress on blending modification of polyphenylene sulfide[J].Plastics Science and Technology,2011,39(7):111-117.
[33] 邱正松,暴丹,李佳,等.井壁强化机理与致密承压封堵钻井液技术新进展[C]//2017年度钻井技术研讨会暨第十七届石油钻井院(所)长会议论文集.北京:石油工业出版社,2017.
QIU Zhengsong,BAO Dan,LI Jia,et al.Mechanisms of borehole wall strengthening and new advances in lost circulation control with dense pressure bearing zone[C]//2017 drilling technology symposium and 17th oil drilling institute deans conference proceedings.Beijing:Petroleum Industry Press,2017. |