延缓膨胀微尺度分散胶及其性能评价

doi:10.7623/syxb2016S2011

石油学报 ›› 2016, Vol. 37 ›› Issue (S2): 93-98.DOI: 10.7623/syxb2016S2011

延缓膨胀微尺度分散胶及其性能评价

蒲万芬¹, 熊英², 杨洋¹, 李之燕²

1. 西南石油大学石油与天然气工程学院四川成都 610500;
2. 中国石油大港油田公司采油工艺研究院天津 300280

收稿日期:2016-07-18 修回日期:2016-12-01 出版日期:2016-12-30 发布日期:2017-03-08
通讯作者: 蒲万芬,女,1961年5月生,1983年获西南石油学院学士学位,现为西南石油大学教授、博士生导师,主要从事提高油气采收率的相关研究。Email:pwf58@163.com
作者简介:蒲万芬,女,1961年5月生,1983年获西南石油学院学士学位,现为西南石油大学教授、博士生导师,主要从事提高油气采收率的相关研究。Email:pwf58@163.com
基金资助:
国家重大科技专项（2016ZX05053-004）资助。

Micro-scale swelling-delayed dispersed gel and its performance evaluation

Pu Wanfen¹, Xiong Ying², Yang Yang¹, Li Zhiyan²

1. College of Petroleum Engineering, Southwest Petroleum University, Sichuan Chengdu 610500, China;
2. Oil Production Technology Institute, PetroChina Dagang Oilfield Company, Tianjin 300280, China

Received:2016-07-18 Revised:2016-12-01 Online:2016-12-30 Published:2017-03-08

摘要/Abstract

摘要：

针对现有分散胶体系膨胀速率较快限制分散胶的深部运移能力的问题，研制了一种延缓膨胀微尺度分散胶（MiDG），对其结构特征、微观形貌、粒度大小及分布进行了表征；评价了MiDG的抗温抗盐性能、缓膨性、强度及韧性；通过物理模拟实验，研究了膨胀前后不同粒度分散胶的注入性及运移特征。结果表明，具有疏水单元结构的MiDG可延迟膨胀时间3d，抗温可达120℃、抗盐可达36.5×10⁴mg/L，转向压力和韧性指数与孔径大小和分散胶粒度大小相关；MiDG具有良好的选择注入性并呈波动式运移规律，当分散胶粒度与渗透率条件相匹配时，可以实现渗透率的沿程调控。

关键词: 分散胶, 缓膨, 抗温抗盐, 强度, 韧性, 运移规律

Abstract:

In view of the expansion rate of existing dispersed gel system is fast and has limited the deep migration ability of dispersed gel, a micro-scale dispersed gel(MiDG) was prepared, for which the structure characteristics, micro-morphology, grain size and distribution were characterized, and the heat-salt resistance performance, delayed swelling property, strength and toughness were also evaluated. Through physical simulation experiment, the injection property and migration characteristics of dispersed gel with different grain sizes prior and posterior swelling were studied. The results show that the MiDG with hydrophobic units can delay the swelling time for 3 days, and temperature tolerance is up to 120℃ and salinity resistance is up to 36.5×10⁴mg/L. The diverting pressure and toughness index of MiDG are related with pore size and MiDG grain size. MiDG has favorable selective injection, showing a fluctuating migration law. When the grain size of MiDG is consistent with permeability conditions, the permeability can be regulated along the migration way.

Key words: dispersed gel, delayed swelling, heat-salt resistance, strength, toughness, migration law

中图分类号:

TE39

蒲万芬, 熊英, 杨洋, 李之燕. 延缓膨胀微尺度分散胶及其性能评价[J]. 石油学报, 2016, 37(S2): 93-98.

Pu Wanfen, Xiong Ying, Yang Yang, Li Zhiyan. Micro-scale swelling-delayed dispersed gel and its performance evaluation[J]. Acta Petrolei Sinica, 2016, 37(S2): 93-98.

参考文献

[1] Al-muntasheri G A,Zitha P L J,Nasr-el-din H A. A new organic gel system for water control:a computed tomography study[J].SPE Journal,2010,15(1):197-207.
[2] You Qing,Wang Kai,Tang Yongchun,et al.Study of a novel self-thickening polymer for improved oil recovery[J].Industrial & Engineering Chemistry Research, 2015,54(40):9667-9674.
[3] Chen Lifeng,Zhang Guicai,Ge Jijiang,et al.An ultrastable hydrogel for enhanced oil recovery based on double-groups cross-linking[J].Energy & Fuels,2015,29(11):7196-7203.
[4] Bai Yingrui,Xiong Chunming,Wei Falin,et al.Gelation study on a hydrophobically associating polymer/polyethylenimine gel system for water shut-off treatment[J]. Energy & Fuels,2015,29(2):447-458.
[5] Jia Hu,Pu Wanfen,Zhao Jinzhou,et al.Research on the gelation performance of low toxic PEI cross-linking PHPAM gel systems as water shutoff agents in low temperature reservoirs[J].Industrial & Engineering Chemistry Research,2010,49(20):9618-9624.
[6] Jia Hu,Zhao Jinzhou,Jin Fayang,et al.New insights into the gelation behavior of polyethyleneimine cross-linking partially hydrolyzed polyacrylamide gels[J].Industrial & Engineering Chemistry Research,2012,51(38):12155-12166.
[7] 戴彩丽,赵娟,姜汉桥,等.低渗透砂岩油藏注入阴阳离子聚合物深部调剖技术研究[J].石油学报,2010,31(3):440-444.
Dai Caili,Zhao Juan,Jiang Hanqiao,et al.Alternative injection of anionic and cationic polymers for deep profile control in low-permeability sandbody reservoir[J]. Acta Petrolei Sinica,2010,31(3):440-444.
[8] 谢全,张婷,蒲万芬,等.醇诱导盐沉析技术对高温高盐油藏的调剖作用[J].石油学报,2010,31(2):289-293.
Xie Quan,Zhang Ting,Pu Wanfen,et al.Profile control effect of high-temperature and high-salinity reservoirs improved by alcohol-induced salt precipitation technology[J].Acta Petrolei Sinica,2010,31(2):289-293.
[9] 冯其红,王森,陈存良,等.低渗透裂缝性油藏调剖选井无因次压力指数决策方法[J].石油学报,2013,34(5):932-937.
Feng Qihong,Wang Sen,Chen Cunliang,et al.A new decision method based on dimensionless pressure index for profile control of low-permeability fractured reservoirs[J].Acta Petrolei Sinica,2013,34(5):932-937.
[10] 贾虎,蒲万芬.有机凝胶控水及堵水技术研究[J].西南石油大学学报:自然科学版,2013,35(6):141-152.
Jia Hu,Pu Wanfen.Research on water control and water shutoff technologies of organic-gel[J].Journal of Southwest Petroleum University:Science & Technology Edition,2013,35(6):141-152.
[11] 白宝君,周佳,印鸣飞.聚丙烯酰胺类聚合物凝胶改善水驱波及技术现状及展望[J].石油勘探与开发,2015,42(4):481-487.
Bai Baojun,Zhou Jia,Yin Mingfei.A comprehensive review of polyacrylamide polymer gels for conformance control[J].Petroleum Exploration and Development,2015,42(4):481-487.
[12] Jia Hu,Ren Qiang,Pu Wanfen,et al.Swelling mechanism investigation of microgel with double-cross-linking structures[J].Energy & Fuels,2014,28(11):6735-6744.
[13] Imqam A,Bai Baojun.Optimizing the strength and size of preformed particle gels for better conformance control treatment[J].Fuel,2015,148:178-185.
[14] Bai Baojun,Li Liangxiong,Liu Yuzhang,et al.Preformed particle gel for conformance control:factors affecting its properties and applications[J].SPE Reservoir Evaluation & Engineering,2007,10(4):415-422.
[15] Bai Baojun,Liu Yuzhang,Coste J P,et al.Preformed particle gel for conformance control:transport mechanism through porous media[J].SPE Reservoir Evaluation & Engineering,2007,10(2):176-184.
[16] Sang Qian,Li Yajun,Yu Long,et al.Enhanced oil recovery by branched-preformed particle gel injection in parallel-sandpack models[J].Fuel,2014,136:295-306.
[17] Abdulbaki M,Huh C,Sepehrnoori K,et al.A critical review on use of polymer microgels for conformance control purposes[J].Journal of Petroleum Science and Engineering,2014,122:741-753.
[18] Bai Baojun,Zhang Hao.Preformed-particle-gel transport through open fractures and its effect on water flow[J].SPE Journal,2011,16(2):388-400.
[19] 周亚贤,侯天江,郭建华,等.耐温抗盐预交联颗粒调剖剂的研制与性能评价[J].精细石油化工进展,2004,5(12):22-24.
Zhou Yaxian,Hou Tianjiang,Guo Jianhua,et al.Synthesis and evaluation of heat-resistant and salt-tolerant precrosslinked particulate profile modification agent[J].Advances in Fine Petrochemicals,2004,5(12):22-24.
[20] 卢祥国,王伟,苏延昌,等.预交联体膨聚合物性质特征研究[J].油田化学,2005,22(4):324-327.
Lu Xiangguo,Wang Wei,Su Yanchang,et al.An experimental study on performance properties of swellable granular precrosslinked polymer[J].Oilfield Chemistry,2005,22(4):324-327.
[21] 赵燕红.预交联凝胶颗粒的吸水膨胀性能评价及应用[J].石油化工应用,2014,33(9):86-89.
Zhao Yanhong.Research on water-swelling properties of pre-crosslinked gel particles and its application[J].Petrochemical Industry Application,2014,33(9):86-89.
[22] 郭艳,李树斌,吕帅,等.预交联颗粒调剖剂的合成与性能评价[J].精细石油化工进展,2007,8(10):5-8.
Guo Yan,Li Shubin,Lv Shuai,et al.Synthesis and properties evaluation of pre-crosslinking particles as profile modification agent[J].Advances in Fine Petrochemicals,2007,8(10):5-8.
[23] 康万利,徐浩,杨红斌,等.预交联凝胶颗粒膨胀性能的影响因素[J].石油与天然气化工,2014,43(6):662-665.
Kang Wanli,Xu Hao,Yang Hongbin,et al.Study on expansion property of pre-crosslinked particle gel with low elasticity and high viscosity[J].Chemical Engineering of Oil & Gas,2014,43(6):662-665.
[24] Smith J E.The transition pressure:a quick method for quantifying polyacrylamide gel strength[R].SPE 18739,1989.

延缓膨胀微尺度分散胶及其性能评价

Micro-scale swelling-delayed dispersed gel and its performance evaluation

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	骆汀汀, 张宸毅, 杨维好, 孙翔, 宋永臣. 含天然气水合物饱和粉质沉积物三轴剪切试验[J]. 石油学报, 2024, 45(6): 1019-1030.
[2]	赵东方, 谭秀成, 罗文军, 王小芳, 徐伟, 罗思聪, 唐大海, 罗垚, 曾伟. 早成岩期岩溶特征及其对古老深层碳酸盐岩储层的成因启示——以川中地区磨溪8井区灯影组四段为例[J]. 石油学报, 2022, 43(9): 1236-1252.
[3]	赵平起, 马跃华, 冯许魁, 李洪革, 何书梅, 韩斯成. 油藏渗流场地球物理表征方法[J]. 石油学报, 2021, 42(5): 634-640.
[4]	张智, 丁剑, 李炎军, 罗鸣, 吴江, 杨昆, 刘金铭. CO₂注采井油管柱服役安全状态评价方法[J]. 石油学报, 2020, 41(8): 991-1000.
[5]	孙宝江, 彭玉丹, 张伟国, 赵艳玲, 陈济颖, 付光明. 筛管压溃强度计算公式及适用性[J]. 石油学报, 2020, 41(3): 363-371.
[6]	曾联波, 刘国平, 朱如凯, 高志勇, 巩磊, 吕文雅. 库车前陆盆地深层致密砂岩储层构造成岩强度的定量评价方法[J]. 石油学报, 2020, 41(12): 1601-1609.
[7]	张劲军, 苏怀, 高鹏. 天然气管网韧性保供问题及其研究展望[J]. 石油学报, 2020, 41(12): 1665-1678.
[8]	祝效华, 孙汉文, 赵金洲, 张烈辉, 张爽. 天然气水合物沉积物等效变弹性模量损伤本构模型[J]. 石油学报, 2019, 40(9): 1085-1094.
[9]	韩强, 屈展, 叶正寅. 基于多尺度均匀化理论的页岩强度表征[J]. 石油学报, 2019, 40(7): 858-865.
[10]	金强, 侯庆杰, 程付启, 王世梁, 张如才, 王飞龙. 成熟探区有效烃源岩的评价方法——以辽东湾地区为例[J]. 石油学报, 2019, 40(3): 257-267.
[11]	吴千慧, 葛际江, 张贵才, 郭洪宾, 赵庆琛. 高强度堵水剂裂缝细管模型堵水模拟实验[J]. 石油学报, 2019, 40(11): 1368-1375.
[12]	霍锦华, 张瑞, 杨磊. CTAB诱导膨润土乳液转相机理及其在可逆乳化油基钻井液中的应用[J]. 石油学报, 2018, 39(1): 122-128.
[13]	贾曦雨, 王树山, 马峰, 唐凯, 陈华彬, 马小强, 潘德凯. 射孔冲击相变对射孔套管抗挤性能的影响[J]. 石油学报, 2017, 38(3): 348-355.
[14]	李怀文, 孙涛, 王超, 刘伟, 曹庆平, 许泽涟. 超低温新型树脂涂敷砂及人工井壁防砂技术[J]. 石油学报, 2016, 37(S2): 112-116,149.
[15]	窦同伟, 刘清友, 任海涛, 孙景涛, 周岩. 地层岩石抗钻特性横向分布规律[J]. 石油学报, 2016, 37(S2): 144-149.