七段制恒工具面角三维水平井轨道设计方法

doi:10.7623/syxb202209010

石油学报 ›› 2022, Vol. 43 ›› Issue (9): 1315-1324.DOI: 10.7623/syxb202209010

七段制恒工具面角三维水平井轨道设计方法

唐雪平¹, 洪迪峰², 高文凯¹, 彭烈新¹, 杨宝斌³

1. 中国石油集团工程技术研究院有限公司北京 102206;
2. 安世亚太科技股份有限公司北京 100020;
3. 中国石油集团渤海钻探工程有限公司第四钻井分公司河北河间 101916

收稿日期:2021-08-31 修回日期:2022-04-19 发布日期:2022-10-08
通讯作者: 唐雪平,男,1964年2月生,1998年获石油勘探开发科学研究院硕士学位,现为中国石油集团工程技术研究院有限公司教授级高级工程师,主要从事定向钻井和井下控制工程技术方面的研究。
作者简介:唐雪平,男,1964年2月生,1998年获石油勘探开发科学研究院硕士学位,现为中国石油集团工程技术研究院有限公司教授级高级工程师,主要从事定向钻井和井下控制工程技术方面的研究。Email:txpdri@cnpc.com.cn
基金资助:
国家重点研发计划项目(2019YFA0708302)资助。

Design method of seven-section well-path with constant tool face angle for three-dimensional horizontal well

Tang Xueping¹, Hong Difeng², Gao Wenkai¹, Peng Liexin¹, Yang Baobin³

1. CNPC Engineering Technology R&D Company Limited, Beijing 102206, China;
2. PERA Technology Corporation Limited, Beijing 100020, China;
3. The Fourth Drilling Branch, CNPC Bohai Drilling Engineering Co., Ltd., Hebei Hejian 101916, China

Received:2021-08-31 Revised:2022-04-19 Published:2022-10-08

摘要/Abstract

摘要： 为降低页岩油气田三维水平井的施工难度,提出了七段制恒工具面角轨道设计模型。根据工程设计需求,将设计参数归为3类18种求解组合。由于参数约束方程为多元非线性方程组,难以解析求解,为此探索了数值求解方法。首先求解对应的三维圆弧轨道模型,将其结果作为恒工具面角轨道模型的初值,进而采用拟牛顿法进行求解。基于三维圆弧轨道模型及其解析公式,设计了恒工具面角轨道模型常用求解组合算法流程,解决了三维恒工具面角设计模型求解难题。算例研究表明,模型求解方法简单、有效,计算精度高,易于编程实现,可以为三维水平井轨道设计以及页岩油气田三维丛式水平井优快钻井提供新选择以及相应的技术支持。

关键词: 水平井, 三维轨道, 恒工具面角, 数值模型, 设计方法

Abstract: To reduce the operation difficulties of three-dimensional horizontal wells in shale oil and gas fields,this paper proposes a design model of the seven-section well-path with constant tool face angle.According to the engineering design requirements,the design parameters are grouped into 3 categories and 18 parameter combinations.Since the parameter constraint equations are multivariate nonlinear systems of equations,which are difficult to be solved analytically,numerical solution methods are explored for this purpose.Firstly,the corresponding three-dimensional circular arc well-path model is solved,and the result is used as the initial value for the model of well-path with constant tool face angle,and then the model is solved using the quasi-Newton method.Based on the three-dimensional circular arc well-path model and its analytical formula,an algorithm flow has been designed for the common parameter combination of the model of well-path with constant tool face angle,and the difficulty in solving the three-dimensional constant tool face angle design model is finally solved.The case study shows that the solution method is simple and effective,characterized with high computational accuracy and easy implementation of programming,which provides options and technical support for three-dimensional horizontal well-path design and the optimal and fast drilling of three-dimensional horizontal cluster wells in shale oil and gas fields.

Key words: horizontal well, three-dimensional well-path, constant tool face angle, numerical model, design method

中图分类号:

TE243

唐雪平, 洪迪峰, 高文凯, 彭烈新, 杨宝斌. 七段制恒工具面角三维水平井轨道设计方法[J]. 石油学报, 2022, 43(9): 1315-1324.

Tang Xueping, Hong Difeng, Gao Wenkai, Peng Liexin, Yang Baobin. Design method of seven-section well-path with constant tool face angle for three-dimensional horizontal well[J]. Acta Petrolei Sinica, 2022, 43(9): 1315-1324.

参考文献

[1] 王志刚.涪陵大型海相页岩气田成藏条件及高效勘探开发关键技术[J].石油学报,2019,40(3):370-382.
WANG Zhigang.Reservoir formation conditions and key efficient exploration&development technologies for marine shale gas fields in Fuling area,South China[J].Acta Petrolei Sinica,2019,40(3):370-382.
[2] 杨柳,石富坤,赵逸清.复杂结构井在页岩气开发中的应用进展[J].科学技术与工程,2019,19(27):12-20.
YANG Liu,SHI Fukun,ZHAO Yiqing.Applied research of complex structure well in shale gas development[J].Science Technology and Engineering,2019,19(27):12-20.
[3] 王敏生,光新军.页岩气" "井工厂" "开发关键技术[J].钻采工艺,2013,36(5):1-4.
WANG Minsheng,GUANG Xinjun.Key technologies of shale gas development by" "well factory" "[J].Drilling&Production Technology,2013,36(5):1-4.
[4] 廖腾彦,余丽彬,李俊胜.吉木萨尔致密砂岩油藏工厂化水平井钻井技术[J].石油钻探技术,2014,42(6):30-33.
LIAO Tengyan,YU Libin,LI Junsheng.A factory-like drilling technology of horizontal wells for tight sandstone reservoirs in the Jimusaer area[J].Petroleum Drilling Techniques,2014,42(6):30-33.
[5] 邹灵战,邹灵雄,蒋雪梅,等.玛湖砂砾岩致密油水平井钻井技术[J].新疆石油天然气,2018,14(3):19-24.
ZOU Lingzhan,ZOU Lingxiong,JIANG Xuemei,et al.The horizontal drilling technology in tight sandy conglomerate reservoirs in Mahu Sag[J].Xinjiang Oil&Gas,2018,14(3):19-24.
[6] 沈国兵,刘明国,晁文学,等.涪陵页岩气田三维水平井井眼轨迹控制技术[J].石油钻探技术,2016,44(2):10-15.
SHEN Guobing,LIU Mingguo,CHAO Wenxue,et al.3D trajectory control technology for horizontal wells in the Fuling shale gas field[J].Petroleum Drilling Techniques,2016,44(2):10-15.
[7] 胥豪,牛洪波,牛似成,等.六段制三维水平井轨道优化设计与应用[J].石油钻采工艺,2017,39(5):564-569.
XU Hao,NIU Hongbo,NIU Sicheng,et al.Optimization design and application of six-stage 3D horizontal well trajectory[J].Oil Drilling&Production Technology,2017,39(5):564-569.
[8] 闫吉曾.恒工具面角三维水平井轨道设计模型及求解算法[J].断块油气田,2018,25(1):117-121.
YAN Jizeng.3D horizontal well wellpath model based on constant tool face angle and its algorithm[J].Fault-Block Oil&Gas Field,2018,25(1):117-121.
[9] 闫吉曾.非均质储层三维水平井轨道设计研究与应用[J].西南石油大学学报:自然科学版,2018,40(2):151-158.
YAN Jizeng.3D well-path design for horizontal wells in heterogeneous reservoirs[J].Journal of Southwest Petroleum University:Science&Technology Edition,2018,40(2):151-158.
[10] 李伟,刘文臣,周贤海,等.涪陵页岩气田三维水平井轨道优化设计方法探讨[J].石油钻探技术,2018,46(2):17-23.
LI Wei,LIU Wenchen,ZHOU Xianhai,et al.3D horizontal wellbore trajectory optimization design method in the Fuling shale gas field[J].Petroleum Drilling Techniques,2018,46(2):17-23.
[11] 白家祉,苏义脑.定向钻井过程中的三维井身随钻修正设计与计算[J].石油钻采工艺,1991,13(6):1-4.
BAI Jiazhi,SU Yinao.Design and calculation of 3D wellbore trajectories during directional drilling[J].Oil Drilling&Production Technology,1991,13(6):1-4.
[12] 韩志勇.两个不准确条件下的水平井轨道设计[J].石油大学学报:自然科学版,1993,17(1):24-30.
HAN Zhiyong.Design of horizontal well trajectories under the conditions of two uncertainties[J].Journal of the University of Petroleum,China,1993,17(1):24-30.
[13] 葛云华,苏义脑.中半径水平井井眼轨道控制方案设计[J].石油钻采工艺,1993,15(2):1-7.
GE Yunhua,SU Yinao.Design of well trajectory control scheme for medium radius horizontal well[J].Oil Drilling&Production Technology,1993,15(2):1-7.
[14] 刘修善,石在虹.给定井眼方向的修正轨道设计方法[J].石油学报,2002,23(2):72-76.
LIU Xiushan,SHI Zaihong.A new method of path-correction planning with the desired direction[J].Acta Petrolei Sinica,2002,23(2):72-76.
[15] 唐雪平,苏义脑,陈祖锡.三维井眼轨道设计模型及其精确解[J].石油学报,2003,24(4):90-93.
TANG Xueping,SU Yinao,CHEN Zuxi.Three-dimensional well-path planning model and its exact solution[J].Acta Petrolei Sinica,2003,24(4):90-93.
[16] 唐雪平,苏义脑,陈祖锡.三维井眼轨道设计模型及应用[J].数学的实践与认识,2004,34(3):62-72.
TANG Xueping,SU Yinao,CHEN Zuxi.3D well-path planning models and their application[J].Mathematics in Practice and Theory,2004,34(3):62-72.
[17] SAWARYN S J,THOROGOOD J L.A compendium of directional calculations based on the minimum curvature method[J].SPE Drilling&Completion,2005,20(1):24-36.
[18] 韩志勇.定向钻井设计与计算[M].东营:中国石油大学出版社,2007:240-245,304-308.
HAN Zhiyong.Design and calculation of directional drilling[M].Dongying:China University of Petroleum Press,2007:240-245,304-308.
[19] 方敏,鲁港,王立波.三维圆弧型井眼轨道模型的完全解[J].同济大学学报:自然科学版,2009,37(3):317-321.
FANG Min,LU Gang,WANG Libo.All solutions of 3D arc-typed well-path planning model[J].Journal of Tongji University:Natural Science,2009,37(3):317-321.
[20] 唐雪平,苏义脑,洪迪峰.空间圆弧轨道的分析与控制[J].数学的实践与认识,2020,50(18):95-103.
TANG Xueping,SU Yinao,HONG Difeng.Analysis and control for spatial arc well path[J].Mathematics in Practice and Theory,2020,50(18):95-103.
[21] 鲁港,习伟东,来建强.三维圆弧型井眼轨道设计模型的拟解析解[J].石油学报,2020,41(12):1679-1685.
LU Gang,XI Weidong,LAI Jianqiang.Quasi-analytical solution of the design model of three-dimensional arc type well trajectory[J].Acta Petrolei Sinica,2020,41(12):1679-1685.
[22] 洪迪峰,唐雪平,高文凯,等.圆弧型井眼轨道设计模型的综合求解法[J].石油学报,2021,42(2):226-232.
HONG Difeng,TANG Xueping,GAO Wenkai,et al.Comprehensive solving method for arc-type well-path planning model[J].Acta Petrolei Sinica,2021,42(2):226-232.
[23] SCHUH F J.Trajectory equations for constant tool face angle deflections[R].SPE 23853,1992.
[24] GUO Boyun,MISKA S,LEE R L.Constant curvature method for planning a 3-D directional well[R].SPE 24381,1992.
[25] 韩志勇.三维定向井轨道设计和轨迹控制的新技术[J].石油钻探技术,2003,31(5):1-3.
HAN Zhiyong.The new techniques of well trajectory design and well path control fit for 3D-directional wells[J].Petroleum Drilling Techniques,2003,31(5):1-3.
[26] 王立波,鲁港.三维定向井轨道设计新方法-恒装置角法[J].石油钻采工艺,2009,31(1):18-21.
WANG Libo,LU Gang.A new approach to 3D direction well track design-the constant tool surface angle method[J].Oil Drilling&Production Technology,2009,31(1):18-21.
[27] 唐雪平,洪迪峰,盛利民,等.恒工具面角井眼轨道设计模型及求解方法[J].石油学报,2018,39(10):1193-1198.
TANG Xueping,HONG Difeng,SHENG Limin,et al.Planning models and solving methods for well-path with constant tool face angle[J].Acta Petrolei Sinica,2018,39(10):1193-1198.
[28] 何树山,刘修善.三维水平井轨道设计[J].石油钻采工艺,2001,23(4):16-20.
HE Shushan,LIU Xiushan.Trajectory planing of three-dimensional horizontal well[J].Oil Drilling&Production Technology,2001,23(4):16-20.
[29] 孙明光,张洪宁,刘卫东,等.特深定向井滑动导向过程中扭矩传递规律研究[J].石油机械,2020,48(2):1-8.
SUN Mingguang,ZHANG Hongning,LIU Weidong,et al.Torque transmission law in slide steering for extra-deep directional wells[J].China Petroleum Machinery,2020,48(2):1-8.
[30] 刘修善.导向钻具定向造斜方程及井眼轨迹控制机制[J].石油勘探与开发,2017,44(5):788-793.
LIU Xiushan.Directional deflection equations for steerable drilling tools and the control mechanism of wellbore trajectory[J].Petroleum Exploration and Development,2017,44(5):788-793.
[31] GOMEZ C,NUNEZ C,SAMUEL R.Integrated analytical trajectory control model[R].SPE 189708,2018.
[32] 顾岳,高德利,杨进,等.页岩气田压裂区加密调整井绕障轨道优化设计方法[J].天然气工业,2020,40(9):87-96.
GU Yue,GAO Deli,YANG Jin,et al.Optimization design method for the bypass trajectories of infill adjustment wells in the fracturing areas of shale gas fields[J].Natural Gas Industry,2020,40(9):87-96.
[33] TANG Xueping,HONG Difeng,SU Yinao,et al.Solving method for three-dimensional circular arc well-path planning model[R].IFEDC 20219457,2021.
[34] 朱海燕,宋宇家,胥云,等.页岩气储层四维地应力演化及加密井复杂裂缝扩展规律[J].石油学报,2021,42(9):1224-1236.
ZHU Haiyan,SONG Yujia,XU Yun,et al.Four-dimensional in-situ stress evolution of shale gas reservoirs and its impact on infill well complex fractures propagation[J].Acta Petrolei Sinica,2021,42(9):1224-1236.
[35] 马天寿,张赟,邱艺,等.基于可靠度理论的斜井井壁失稳风险评价方法[J].石油学报,2021,42(11):1486-1498.
MA Tianshou,ZHANG Yun,QIU Yi,et al.Risk evaluation method of borehole instability of deviated wells based on reliability theory[J].Acta Petrolei Sinica,2021,42(11):1486-1498.
[36] 祝效华,李波,李柯,等.大斜度井钻柱动态摩阻扭矩快速求解方法[J].石油学报,2019,40(5):611-620.
ZHU Xiaohua,LI Bo,LI Ke,et al.Quick solution method for dynamic friction torque of drilling string in a highly-deviated well[J].Acta Petrolei Sinica,2019,40(5):611-620.
[37] 刘修善.邻井距离解算及防碰评价[J].石油学报,2019,40(8):983-989.
LIU Xiushan.Distance calculation and anti-collision evaluation between the reference well and offset wells[J].Acta Petrolei Sinica,2019,40(8):983-989.
[38] 唐雪平.一种精确的井距计算方法[J].数学的实践与认识,2012,42(17):69-78.
TANG Xueping.An exact well distance calculation method[J].Mathematics in Practice and Theory,2012,42(17):69-78.
[39] 徐士良.常用算法程序集(C语言描述)[M].3版.北京:清华大学出版社,2004:244-246,173-178.
XU Shiliang.C common algorithm program set[M].3rd ed.Beijing:Tsinghua University Press,2004:244-246,173-178.
[40] 李国欣,吴志宇,李桢,等.陆相源内非常规石油甜点优选与水平井立体开发技术实践——以鄂尔多斯盆地延长组7段为例[J].石油学报,2021,42(6):736-750.
LI Guoxin,WU Zhiyu,LI Zhen,et al.Optimal selection of unconventional petroleum sweet spots inside continental source kitchens and actual application of three-dimensional development technology in horizontal wells:a case study of the Member 7 of Yanchang Formation in Ordos Basin[J].Acta Petrolei Sinica,2021,42(6):736-750.

七段制恒工具面角三维水平井轨道设计方法

Design method of seven-section well-path with constant tool face angle for three-dimensional horizontal well

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	汤明, 郭欣钰, 谢玉森, 赵晨敏, 敬亚东, 何世明. 幂律流体在椭圆井眼同心环空中螺旋层流流动压降[J]. 石油学报, 2024, 45(3): 586-594.
[2]	杨立红, 朱超凡, 曾皓, 苏建政, 王益维, 武俊文, 陈旭东, 郭威. 油页岩自生热原位转化直井与水平井开发效果数值模拟——以鄂尔多斯盆地旬邑地区油页岩为例[J]. 石油学报, 2023, 44(8): 1333-1343.
[3]	高永海, 尹法领, 张党生, 孙小辉, 赵欣欣, 陈野, 孙宝江. 水合物储层水平井钻井井筒-储层耦合模型与井壁稳定性分析[J]. 石油学报, 2023, 44(7): 1151-1166.
[4]	鲜保安, 高德利, 徐凤银, 毕延森, 李贵川, 王京光, 张洋, 韩金良. 中国煤层气水平井钻完井技术研究进展[J]. 石油学报, 2023, 44(11): 1974-1992.
[5]	陈志明, Yu Wei, 石璐铭, 胡连博, 廖新维. 压裂水平井的多模式裂缝网络试井模型及参数评价——以吉木萨尔页岩油为例[J]. 石油学报, 2023, 44(10): 1706-1726.
[6]	李宁, 冯周, 武宏亮, 田瀚, 刘鹏, 刘英明, 刘忠华, 王克文, 徐彬森. 中国陆相页岩油测井评价技术方法新进展[J]. 石油学报, 2023, 44(1): 28-44.
[7]	史晓东, 孙灵辉, 战剑飞, 李斌会, 韩雪, 陆慧敏, 蒋成刚. 松辽盆地北部致密油水平井二氧化碳吞吐技术及其应用[J]. 石油学报, 2022, 43(7): 998-1006.
[8]	柳军, 杜智刚, 郭晓强, 殷腾, 俞海, 曹大勇. 水平井裸眼分段压裂完井管柱下入屈曲磨损预测模型及规律[J]. 石油学报, 2022, 43(11): 1632-1641.
[9]	胡松, 王敏, 刘伟男, 王兵. 页岩水平井声波时差各向异性校正方法及其应用[J]. 石油学报, 2022, 43(1): 58-66.
[10]	罗红文, 李海涛, 李颖, 汪凤, 向雨行, 蒋贝贝, 于皓. 低渗透气藏压裂水平井产出剖面与裂缝参数反演解释[J]. 石油学报, 2021, 42(7): 936-947.
[11]	郜益华, 张迎春, 杨宝泉, 李珂, 苑志旺, 康博韬, 张昕, 张旭, 陈国宁. 复杂断块油田跨断层水平井产能预测及分段长度优化方法——以西非A深水油田为例[J]. 石油学报, 2021, 42(7): 948-961.
[12]	李国欣, 吴志宇, 李桢, 陈强, 鲜成刚, 刘合. 陆相源内非常规石油甜点优选与水平井立体开发技术实践 ——以鄂尔多斯盆地延长组7段为例[J]. 石油学报, 2021, 42(6): 736-750.
[13]	张家强, 李士祥, 李宏伟, 周新平, 刘江艳, 郭睿良, 陈俊霖, 李树同. 鄂尔多斯盆地延长组7油层组湖盆远端重力流沉积与深水油气勘探——以城页水平井区长7₃小层为例[J]. 石油学报, 2021, 42(5): 570-587.
[14]	张胜飞, 孙新革, 苟燕, 张忠义, 王红庄, 周晓义, 解阳波, 吕柏林. 流量控制器在SAGD技术中的应用现状及思考[J]. 石油学报, 2021, 42(10): 1395-1404.
[15]	刘合, 匡立春, 李国欣, 王峰, 金旭, 陶嘉平, 孟思炜. 中国陆相页岩油完井方式优选的思考与建议[J]. 石油学报, 2020, 41(4): 489-496.