[1] 祝效华,刘伟吉.单齿高频扭转冲击切削的破岩及提速机理[J].石油学报,2017,38(5):578-586.
ZHU Xiaohua,LIU Weiji.The rock breaking and ROP rising mechanism for single-tooth high-frequency torsional impact cutting[J].Acta Petrolei Sinica,2017,38(5):578-586.
[2] 况雨春,朱志镨,蒋海军,等.单粒子冲击破岩实验与数值模拟[J].石油学报,2012,33(6):1059-1063.
KUANG Yuchun,ZHU Zhipu,JIANG Haijun,et al.The experimental study and numerical simulation of single-particle impacting rock[J].Acta Petrolei Sinica,2012,33(6):1059-1063.
[3] 张光亚,马锋,梁英波,等.全球深层油气勘探领域及理论技术进展[J].石油学报,2015,36(9):1156-1166.
ZHANG Guangya,MA Feng,LIANG Yingbo,et al.Domain and theory-technology progress of global deep oil & gas exploration[J].Acta Petrolei Sinica,2015,36(9):1156-1166.
[4] 陶兴华.提高深井钻井速度的有效技术方法[J].石油钻采工艺,2001,23(5):4-8.
TAO Xinghua.Effective measures for improving the penetration rate of deep well[J].Oil Drilling & Production Technology,2001,23(5):4-8.
[5] 何金南.深井钻井技术问题及其系统分析[J].石油钻采工艺,2005,27(5):1-7.
HE Jinnan.Technical problems of deep well drilling and their systems analysis[J].Oil Drilling & Production Technology,2005,27(5):1-7.
[6] 祝效华,刘伟吉.旋冲钻井技术的破岩及提速机理[J].石油学报,2018,39(2):216-222.
ZHU Xiaohua,LIU Weiji.Rock breaking and ROP rising mechanism of rotary-percussive drilling technology[J].Acta Petrolei Sinica,2018,39(2):216-222.
[7] 林元华,施太和,梁政,等.冲旋钻井机械钻速仿真研究[J].石油学报,2004,25(5):88-92.
LIN Yuanhua,SHI Taihe,LIANG Zheng,et al.Simulation of penetration rate of air percussion drilling bit[J].Acta Petrolei Sinica,2004,25(5):88-92.
[8] 田家林,杨应林,朱志,等.基于旋冲螺杆提速器的井下动力特性[J].石油学报,2019,40(2):224-231.
TIAN Jialin,YANG Yinglin,ZHU Zhi,et al.Downhole dynamic characteristics of an actuator based on rotary screw[J].Acta Petrolei Sinica,2019,40(2):224-231.
[9] 付加胜,李根生,田守嶒,等.液动冲击钻井技术发展与应用现状[J].石油机械,2014,42(6):1-6.
FU Jiasheng,LI Gensheng,TIAN Shouceng,et al.The current development and application of hydraulic percussion drilling technology[J].China Petroleum Machinery,2014,42(6):1-6.
[10] 穆总结,李根生,黄中伟,等.轴扭耦合冲击钻井技术研究[J].石油机械,2018,46(10):12-17.
MU Zongjie,LI Gensheng,HUANG Zhongwei,et al.Research on axial-torsional coupling percussion drilling technology[J].China Petroleum Machinery,2018,46(10):12-17.
[11] 王德余,李根生,史怀忠,等.高效破岩新方法进展与应用[J].石油机械,2012,40(6):1-6.
WANG Deyu,LI Gensheng,SHI Huaizhong,et al.Progress of the high-efficiency rock-breaking method[J].China Petroleum Machinery,2012,40(6):1-6.
[12] XUAN Lingchao,GUAN Zhichuan,HU Huaigang.Design and analysis of a novel rotary percussion drilling tool in petroleum exploration[J].Journal of Applied Science and Engineering,2017,20(1):73-80.
[13] FU Jiasheng,LI Gensheng,SHI Huaizhong,et al.A novel tool to improve the rate of penetration——hydraulic-pulsed cavitating-jet generator[J].SPE Drilling & Completion,2012,27(3):355-362.
[14] WANG Peng,NI Hongjian,WANG Ruihe,et al.Modulating downhole cuttings via a pulsed jet for efficient drilling-tool development and field testing[J].Journal of Natural Gas Science and Engineering,2015,27:1287-1295.
[15] YANG Yandong,LIAO Hualin,XU Yue,et al.Coupled fluid-structure simulation of a vibration-assisted rotary percussion drilling tool[J].Energy Sources,Part A:Recovery,Utilization,and Environmental Effects,2019,40(14):1725-1738.
[16] WILSON A.Hydraulic percussion drilling system boosts rate of penetration,lowers cost[J].Journal of Petroleum Technology,2015,67(12):79-80.
[17] GHASEMLOONIA A,GEOFF RIDEOUT D,BUTT S D.Vibration analysis of a drillstring in vibration-assisted rotary drilling:finite element modeling with analytical validation[J].Journal of Energy Resources Technology,2013,135(3):032902
[18] BABAPOUR S.Investigation of enhancing drill cuttings cleaning and penetration rate using cavitating pressure pulses[C]//Proceedings of the 48th U.S.Rock Mechanics/Geomechanics Symposium.Minneapolis,Minnesota:ARMA,2014.
[19] GHASEMLOONIA A,GEOFF RIDEOUT D,BUTT S D.Analysis of multi-mode nonlinear coupled axial-transverse drillstring vibration in vibration assisted rotary drilling[J].Journal of Petroleum Science and Engineering,2014,116:36-49.
[20] MELAMED Y,KISELEV A,GELFGAT M,et al.Hydraulic hammer drilling technology:developments and capabilities[J].Journal of Energy Resources Technology, 2000,122(1):1-7.
[21] XIAO Yingjian,HURICH C,MOLGAARD J,et al.Investigation of active vibration drilling using acoustic emission and cutting size analysis[J].Journal of Rock Mechanics and Geotechnical Engineering,2018,10(2):390-401.
[22] 安辉樊,军蒋龙.冲旋钻井过程入射波形与能量传递效率关系研究[J].机械设计与制造,2016(1):43-46.
AN Huifan,JUN Jianglong.Study on relationship between incident wave shape and energy transfer efficiency in rotary-percussive rock drilling process[J].Machinery Design & Manufacture,2016(1):43-46.
[23] LUNDBERG B,COLLET P.Optimal wave with respect to efficiency in percussive drilling with integral drill steel[J].International Journal of Impact Engineering,2010,37(8):901-906.
[24] LUNDBERG B,OKROUHLIK M.Efficiency of a percussive rock drilling process with consideration of wave energy radiation into the rock[J].International Journal of Impact Engineering,2006,32(10):1573-1583.
[25] 单仁亮,杨永琦,赵统武.冲击凿入系统入射波形与凿入效率的研究[J].爆炸与冲击,1995,15(3):247-253.
SHAN Renliang,YANG Yongqi,ZHAO Tongwu.Study on incident wave shape and penetrative efficiency of a percussive penetrative system[J].Explosion and Shock Waves,1995,15(3):247-253.
[26] YANG Yandong,LIAO Hualin,XU Yue,et al.Theoretical investigation of the energy transfer efficiency under percussive drilling loads[J].Arabian Journal of Geosciences,2019,12(5):175.
[27] LUNDBERG B,COLLET P.Optimal wave shape with respect to efficiency in percussive drilling with detachable drill bit[J].International Journal of impact Engineering,2015,86:179-187.
[28] ZHOU Zilong,LI Xibing,LIU Aihua,et al.Stress uniformity of split Hopkinson pressure bar under half-sine wave loads[J].International Journal of Rock Mechanics and Mining Sciences,2011,48(4):697-701.
[29] 付加胜,李根生,牛继磊,等.脉冲式井下增压钻井装置关键参数设计与分析[J].石油机械,2013,41(3):1-6.
FU Jiasheng,LI Gensheng,NIU Jilei,et al.Design and analysis of the key parameters of downhole pulsed boosting drilling device[J].China Petroleum Machinery,2013,41(3):1-6. |