CALCULATION OF SEALING PARAMETERS OF RUBBER CORES FOR RAM BLOWOUT PREVENTERS AND THEIR STRUCTURAL OPTIMIZATION

doi:10.7623/syxb199701021

Editorial office of ACTA PETROLEI SINICA ›› 1997, Vol. 18 ›› Issue (1): 123-128.DOI: 10.7623/syxb199701021

• Petroleum Engineering • Previous Articles Next Articles

CALCULATION OF SEALING PARAMETERS OF RUBBER CORES FOR RAM BLOWOUT PREVENTERS AND THEIR STRUCTURAL OPTIMIZATION

Lin Jun, Wu Kaisong

Southwest Petroleum Institute

Received:1994-12-14 Revised:1995-06-03 Online:1997-01-25 Published:2010-09-06

闸板防喷器胶芯密封参数算法及结构优化

林军, 伍开松

西南石油学院

作者简介:林军,1987年毕业于西安石油学院。现为西安石油学院机械系零件教研室副主任。通讯处:四川省南充市。邮政编码:637001。

Abstract

Abstract: A calculation method of the sealing parameters, such as sealing pressure, eccentricity and so on, is presented by applying the theory of non-linear great deformation.The mechanical model of ram assembly is also offered according to the working conditions of ram blowout preventer.In the light of sealing conditions of normal working rubber core, the rational range of the eccentricity is given.Structural optimization design for the ram rubber core is carried out on the basis of the above.

Key words: ram blowout preventer, rubber core, structure parameter, optimization design

摘要： 根据闸板防喷器工作性能要求,通过建立闸板总成力学模型,应用橡胶非线性大变形理论,研究了胶芯密封比压与偏心距等密封参数的确定方法。并依据胶芯可靠、合理封井的条件,确定了保证防喷器正常工作时偏心距的取值范围。最终在此基础上对胶芯结构进行了优化。

关键词: 闸板防喷器, 胶芯, 结构参数, 优化设计

Lin Jun, Wu Kaisong. CALCULATION OF SEALING PARAMETERS OF RUBBER CORES FOR RAM BLOWOUT PREVENTERS AND THEIR STRUCTURAL OPTIMIZATION[J]. Editorial office of ACTA PETROLEI SINICA, 1997, 18(1): 123-128.

林军, 伍开松. 闸板防喷器胶芯密封参数算法及结构优化[J]. 石油学报, 1997, 18(1): 123-128.

[1]	Fan Jilin, Jin Ya, Li Min, Zhang Qiong, Yang Ziyu, Wang Rongpu, Hui Dangtao. Research on spacing optimization and density inversion for ultra-slim X-ray density logging tool [J]. Acta Petrolei Sinica, 2025, 46(3): 563-573.
[2]	Su Yuliang, Wang Wendong, Sheng Guanglong. Compound flow model of volume fractured horizontal well [J]. ACTA PETROLEI SINICA, 2014, 35(3): 504-510.
[3]	Guo Jianchun, Gou Bo, Ren Shan, Liu Lin, Wang Xingwen. Fracturing parameters optimization design for horizontal well with shale and sandstone interbeds in western Sichuan [J]. ACTA PETROLEI SINICA, 2014, 35(3): 511-518.
[4]	ZENG Fanhui, GUO Jianchun, LIU Heng, YIN Jian. Optimization design and application of horizontal well staged fracturing in tight gas reservoirs [J]. Editorial office of ACTA PETROLEI SINICA, 2013, 34(5): 959-968.
[5]	YIN Bangtang LI Xiangfang DU Hui HU Airong XU Zhenzhen. An optimization design for the well completion test technology [J]. Editorial office of ACTA PETROLEI SINICA, 2011, 32(6): 1072-1077.
[6]	LIU Xiushan. A universal technique of planning 2D well profiles [J]. Editorial office of ACTA PETROLEI SINICA, 2010, 31(6): 1004-1008.
[7]	DONG Shimin ZHANG Xishun WU Changjie GUO Jimin. Simulation and optimization method for the integral energy-saving suction parameters of rod pumping wells in an oilfield [J]. Editorial office of ACTA PETROLEI SINICA, 2010, 31(3): 475-479.
[8]	LIU Shan, TONG Dengke. Optimization models of separated production scheme in horizontal wells based on reservoir-wellbore coupling [J]. ACTA PETROLEI SINICA, 2009, 30(6): 932-936.
[9]	LIU Xiushan. Planning technique of 3D sidetrack wells for bypassing obstacles [J]. ACTA PETROLEI SINICA, 2009, 30(6): 916-922.
[10]	ZHU Kuanliang, LI Nan, LI Rui, WANG Zaiming, CUI Haidi. Design of high-efficiency PDC bit and its application to basalt drilling in Nanpu Oilfield [J]. Editorial office of ACTA PETROLEI SINICA, 2009, 30(5): 760-763.
[11]	WANG Zhiyuan, SUN Baojiang, GAO Yonghai, CAO Shijing, SONG Linsong. Simulation computation of well killing with deepwater driller’s method [J]. Editorial office of ACTA PETROLEI SINICA, 2008, 29(5): 786-790.
[12]	DONG Shimin, WANG Shengjie, LU Dongfeng, JI Shengzhu, HOU Weiqian, WANG Xitao. Simulation models for optimization design of suction parameters for rod pumping system in directional wells [J]. Editorial office of ACTA PETROLEI SINICA, 2008, 29(1): 120-123.
[13]	Zhang Hongling, Liu Huiqing, Wang Han, Wang Shulin, Bao Shucheng. Optimization design of profile control parameters for steam stimulation wells [J]. Editorial office of ACTA PETROLEI SINICA, 2007, 28(2): 105-108.
[14]	Zheng Haijin, Deng Jibin. Research and application on designing method of sucker-rod pumping system with the least energy consumption [J]. Editorial office of ACTA PETROLEI SINICA, 2007, 28(2): 129-132.
[15]	TAN Chao-dong, HE De-cai, ZHANG Si-wei. Optimization design of wire rope sucker rod pumping system [J]. Editorial office of ACTA PETROLEI SINICA, 2005, 26(6): 104-108.

CALCULATION OF SEALING PARAMETERS OF RUBBER CORES FOR RAM BLOWOUT PREVENTERS AND THEIR STRUCTURAL OPTIMIZATION

闸板防喷器胶芯密封参数算法及结构优化

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments