RELIABILITY-OPTIMIZATION DESIGN OF SHOCK ABSORBING BELLEVILLE SPRING FOR DRILLING AND PRODUCTION MACHINERY

doi:10.7623/syxb199402016

Editorial office of ACTA PETROLEI SINICA ›› 1994, Vol. 15 ›› Issue (2): 139-146.DOI: 10.7623/syxb199402016

• Petroleum Engineering • Previous Articles Next Articles

RELIABILITY-OPTIMIZATION DESIGN OF SHOCK ABSORBING BELLEVILLE SPRING FOR DRILLING AND PRODUCTION MACHINERY

Zhong shouyan, Huang Qingshi, Liu Zhuoiun

Jianghan Petroleum Institute

Received:1992-07-28 Revised:1993-01-18 Online:1994-04-25 Published:2013-07-08

钻采机械减震碟形弹簧可靠性优化设计

钟守炎, 黄清世, 刘卓钧

江汉石油学院

作者简介:钟守炎,1961年4月生.1983年毕业于江汉石油学院矿机专业,1989年获工科硕士学位.现任江汉石油学院机械系讲师.通讯处:湖北荆州.邮政编码:434102.

Abstract

Abstract: There exists naturally an opthization problem in the reliability design of mechanical products,The optimum parameters of the products designed are found under a fixed reliability. The general method of reliability-optimization design of mechanical products is introduced with regard to the shock absorption belleville spring for petroleum machinery. A mathematical model of reliability-optimization of belleville spring is set up and an example is given.

Key words: shock absorber, spring, turbodrill, reliability, optimization design

摘要： 设计现代机械产品应该是在满足各种常规约束和可靠性约束的条件下追求成本最低、或重量最轻、体积最小.机械产品的可靠性设计也存在一个优化问题,从而使设计的产品在可靠性满足规定的前提下,其参数获得优化解.本文综合了可靠性设计理论和最优化技术的优点于一体,结合石油机械减震用碟形弹簧,介绍了机械产品可靠性优化设计的一般方法,并按照碟形弹簧的设计要求,建立了其可靠性优化设计的数学模型,给出了碟形弹簧的可靠性优化实例.

关键词: 减震器, 弹簧, 涡轮钻具, 可靠性, 优化设计

Zhong shouyan, Huang Qingshi, Liu Zhuoiun. RELIABILITY-OPTIMIZATION DESIGN OF SHOCK ABSORBING BELLEVILLE SPRING FOR DRILLING AND PRODUCTION MACHINERY[J]. Editorial office of ACTA PETROLEI SINICA, 1994, 15(2): 139-146.

钟守炎, 黄清世, 刘卓钧. 钻采机械减震碟形弹簧可靠性优化设计[J]. 石油学报, 1994, 15(2): 139-146.

[1]	Ma Tianshou, Zhang Yun, Qiu Yi, Liu Yang, Chen Ping. Risk evaluation method of borehole instability of deviated wells based on reliability theory [J]. Acta Petrolei Sinica, 2021, 42(11): 1486-1498.
[2]	Zhang Jinjun, Su Huai, Gao Peng. Resilience-based supply assurance of natural gas pipeline networks and its research prospects [J]. Acta Petrolei Sinica, 2020, 41(12): 1665-1678.
[3]	Song Yujie, Peng Huifen, Xia Ye. A fuzzy reliability analysis on the longitudinal vibration of remanufacturing sucker rod [J]. Acta Petrolei Sinica, 2017, 38(4): 468-474.
[4]	Fan Heng, Yan Xiangzhen, Feng Yaorong, Wang Jianjun, Yang Xiujuan, Wang Peng. Practical reliability design method of casing based on partial coefficient method [J]. Acta Petrolei Sinica, 2016, 37(6): 807-814.
[5]	Yao Anlin, Huang Liangliang, Xu Taolong. Reliability analysis of gas transmission station based on GO methodology [J]. Acta Petrolei Sinica, 2016, 37(5): 688-694.
[6]	Zhang Peng, Peng Yang. Failure probability of corroded pipeline considering random variables correlation [J]. Acta Petrolei Sinica, 2016, 37(10): 1293-1301.
[7]	Han Wenhai, Zhou Jing. Reliability analysis of corroded subsea pipeline [J]. Acta Petrolei Sinica, 2015, 36(4): 516-520.
[8]	Su Yuliang, Wang Wendong, Sheng Guanglong. Compound flow model of volume fractured horizontal well [J]. ACTA PETROLEI SINICA, 2014, 35(3): 504-510.
[9]	Guo Jianchun, Gou Bo, Ren Shan, Liu Lin, Wang Xingwen. Fracturing parameters optimization design for horizontal well with shale and sandstone interbeds in western Sichuan [J]. ACTA PETROLEI SINICA, 2014, 35(3): 511-518.
[10]	Wang Kai, Liao Haili, Li Mingshui, Ma Cunming, Zuo Leibin. Wind induced response of long-span pipeline bridge in mountainous valley [J]. ACTA PETROLEI SINICA, 2014, 35(3): 564-569.
[11]	Yu Benfu, Yan Xiangzhen, Yang Henglin, Xu Zhiqian, Yang Xiujuan, Feng Yaorong. Non-probabilistic reliability analysis of dead fault slip in underground gas storage based on convex model [J]. ACTA PETROLEI SINICA, 2014, 35(3): 577-583.
[12]	Cheng Ye, Wang Zhiming, Lu Qingchao, Qu Fengzhong, Wang Chizhong. Hydraulic torque analysis on oscillating mud pulse for MWD/LWD [J]. ACTA PETROLEI SINICA, 2014, 35(2): 385-389.
[13]	ZENG Fanhui, GUO Jianchun, LIU Heng, YIN Jian. Optimization design and application of horizontal well staged fracturing in tight gas reservoirs [J]. Editorial office of ACTA PETROLEI SINICA, 2013, 34(5): 959-968.
[14]	HUANG Weihe. Reliability of large-scale natural gas pipeline network [J]. Editorial office of ACTA PETROLEI SINICA, 2013, 34(2): 401-404.
[15]	ZHANG Lisong　YAN Xiangzhen　TIAN Zhonglan　YANG Henglin　YANG Xiujuan. A collapse pressure analysis in reservoir drilling based on the reliability method [J]. Editorial office of ACTA PETROLEI SINICA, 2012, 33(3): 477-482.

RELIABILITY-OPTIMIZATION DESIGN OF SHOCK ABSORBING BELLEVILLE SPRING FOR DRILLING AND PRODUCTION MACHINERY

钻采机械减震碟形弹簧可靠性优化设计

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments