| [1] 康毅力,罗平亚. 中国致密砂岩气藏勘探开发关键工程技术现状与展望[J].石油勘探与开发,2007,34(2):239-245.KANG Yili,LUO Pingya.Current status and prospect of key techniques for exploration and production of tight sandstone gas reservoirs in China[J].Petroleum Exploration and Development,2007,34(2):239-245.
 [2] 刘春,张荣虎,张惠良,等.致密砂岩储层微孔隙成因类型及地质意义——以库车前陆冲断带超深层储层为例[J].石油学报,2017,38(2):150-159.
 LIU Chun,ZHANG Ronghu,ZHANG Huiliang,et al.Genetic types and geological significance of micro pores in tight sandstone reservoirs:a case study of the ultra-deep reservoir in the Kuqa foreland thrust belt,NW China[J].Acta Petrolei Sinica,2017,38(2):150-159.
 [3] 朱如凯,吴松涛,苏玲,等.中国致密储层孔隙结构表征需注意的问题及未来发展方向[J].石油学报,2016,37(11):1323-1336.
 ZHU Rukai,WU Songtao,SU Ling,et al.Problems and future works of porous texture characterization of tight reservoirs in China[J].Acta Petrolei Sinica,2016,37(11):1323-1336.
 [4] KOSYNKIN D V,CERIOTTI G,WILSON K C,et al.Graphene oxide as a high-performance fluid-loss-control additive in water-based drilling fluids[J].ACS Applied Materials & Interfaces,2012,4(1):222-227.
 [5] WINDARTO,GUNAWAN A Y,SUKARNO P,et al.Modelling of formation damage due to mud filtrate invasion in a radial flow system[J].Journal of Petroleum Science and Engineering,2012,100:99-105.
 [6] 吕开河,邱正松,魏慧明,等.自适应防漏堵漏钻井液技术研究[J].石油学报,2008,29(5):757-760.
 LV Kaihe,QIU Zhengsong,WEI Huiming,et al.Study on techniques of auto-adapting lost circulation resistance and control for drilling fluid[J].Acta Petrolei Sinica,2008,29(5):757-760.
 [7] 王珂,张惠良,张荣虎,等.超深层致密砂岩储层构造裂缝特征及影响因素——以塔里木盆地克深2气田为例[J].石油学报,2016,37(6):715-727.
 WANG Ke,ZHANG Huiliang,ZHANG Ronghu,et al.Characteristics and influencing factors of ultra-deep tight sandstone reservoir structural fracture:a case study of Keshen-2 gas field,Tarim Basin[J].Acta Petrolei Sinica,2016,37(6):715-727.
 [8] 狄勤丰,陈锋,李宁,等.超深井钻具接头极限工作扭矩图版及其应用[J].石油学报,2016,37(4):516-522.
 DI Qinfeng,CHEN Feng,LI Ning,et al.Ultimate working torque chart of tool joints in ultra deep wells and its application[J].Acta Petrolei Sinica,2016,37(4):516-522.
 [9] 王中华.国内外油基钻井液研究与应用进展[J].断块油气田,2011,18(4):533-537.
 WANG Zhonghua.Research and application progress of oil-based drilling fluid at home and abroad[J].Fault-Block Oil & Gas Field,2011,18(4):533-537.
 [10] LEI Ming,HUANG Wei’an,LI Ning,et al.The damage mechanism of oil-based drilling fluid for tight sandstone gas reservoir and its optimization[J].Journal of Petroleum Science & Engineering,2017,158:616-625.
 [11] 徐同台,刘玉杰,申威,等.钻井工程防漏堵漏技术[M].北京:石油工业出版社,1997:217-220.
 XU Tongtai,LIU Yujie,SHEN Wei,et al.Technology of lost circulation resistance and control during drilling engineering[M].Beijing:Petroleum Industry Press,1997:217-220.
 [12] MESSENGER J U.Lost circulation[M].Oklahoma:PennWell Publishing Company,1981:14-15.
 [13] LOLOI M,ZAKI K S,ZHAI Zongyu,et al.Borehole strengthening and injector plugging-the common geomechanics thread[R].SPE 128589,2010.
 [14] XU Chengyuan,KANG Yili,CHEN Fei,et al.Fracture plugging optimization for drill-in fluid loss control and formation damage prevention in fractured tight reservoir[J].Journal of Natural Gas Science and Engineering,2016,35:1216-1227.
 [15] KAGESON-LOE N M,SANDERS M W,GROWCOCK F,et al.Particulate-based loss-prevention material-The secrets of fracture sealing revealed[J].SPE Drilling & Completion,2009,24(4):581-589.
 [16] 张希文,李爽,张洁,等.钻井液堵漏材料及防漏堵漏技术研究进展[J].钻井液与完井液,2009,26(6):74-76.
 ZHANG Xiwen,LI Shuang,ZHANG Jie,et al.Research progress on lost circulation materials and lost circulation control technology[J].Drilling Fluid & Completion Fluid,2009,26(6):74-76.
 [17] ALBERTY M W,MCLEAN M R.A physical model for stress cages[R].SPE 90493,2004.
 [18] VAN OORT E,FRIEDHEIM J E,PIERCE T,et al.Avoiding losses in depleted and weak zones by constantly strengthening wellbores[R].SPE 125093,2011.
 [19] 康毅力,许成元,唐龙,等.构筑井周坚韧屏障:井漏控制理论与方法[J].石油勘探与开发,2014,41(4):473-479.
 KANG Yili,XU Chengyuan,TANG Long,et al.Constructing a tough shield around the wellbore:theory and method for lost-circulation control[J].Petroleum Exploration & Development,2014,41(4):473-479.
 [20] SAVARI S,WHITFILL D L,JAMISON D E,et al.A method to evaluate lost circulation materials-investigation of effective wellbore strengthening applications[R].SPE 167977,2014.
 [21] 曾义金,李大奇,杨春和.裂缝性地层防漏堵漏力学机制研究[J].岩石力学与工程学报,2016,35(10):2054-2061.
 ZENG Yijin,LI Daqi,YANG Chunhe.Leakage prevention and control in fractured formations[J].Chinese Journal of Rock Mechanics and Engineering,2016,35(10):2054-2061.
 [22] XU Chengyuan,KANG Yili,YOU Lijun,et al.Lost-circulation control for formation-damage prevention in naturally fractured reservoir:mathematical model and experimental study[J].SPE Journal,2017,22(5):1654-1670.
 [23] 邱正松,暴丹,刘均一,等.裂缝封堵失稳微观机理及致密承压封堵实验[J].石油学报,2018,39(5):587-596.
 QIU Zhengsong,BAO Dan,LIU Junyi,et al.Microcosmic mechanism of fracture-plugging instability and experimental study on pressure bearing and tight plugging[J].Acta Petrolei Sinica,2018,39(5):587-596.
 [24] KEMMISH D J,HAY J N.The effect of physical ageing on the properties of Amorphous PEEK[J].Polymer,1985,26(6):905-912.
 [25] GHAZALI N A,MOHD T A T,ALIAS N,et al.The effects of temperature on rheology properties and filtrate after using lemongrass as lost circulation materials for oil based drilling mud[J].Advanced Materials Research,2014,911:243-247.
 [26] 李志勇,杨超,马攀,等.高温堵漏凝胶性能评价系统[J].钻井液与完井液,2015,32(2):52-54.
 LI Zhiyong,YANG Chao,MA Pan,et al.Instrument for High temperature gel LCM evaluation[J].Drilling Fluid & Completion Fluid,2015,32(2):52-54.
 [27] LIU Xinyou,TIMAR M C,VARODI A M,et al.An investigation of accelerated temperature-induced ageing of four wood species:colour and FTIR[J].Wood Science and Technology,2017,51(2):357-378.
 [28] 王平全,李再钧,聂勋勇,等.用于钻井堵漏和封堵的特种凝胶抗冲稀性能[J].石油学报,2012,33(4):697-701.
 WANG Pingquan,LI Zaijun,NIE Xunyong,et al.Anti-dilution properties of a special gel applied to loss circulation control in drilling[J].Acta Petrolei Sinica,2012,33(4):697-701.
 [29] XU Chengyuan,YOU Zhenjiang,KANG Yili,et al.Stochastic modelling of particulate suspension transport for formation damage prediction in fractured tight reservoir[J].Fuel,2018,221:476-490.
 [30] BEDRIKOVETSKY P,YOU Zhenjiang,BADALYAN A,et al.Analytical model for straining-dominant large-retention depth filtration[J].Chemical Engineering Journal,2017,330:1148-1159.
 [31] 邱正松,刘均一,周宝义,等.钻井液致密承压封堵裂缝机理与优化设计[J].石油学报,2016,37(增刊2):137-143.
 QIU Zhengsong,LIU Junyi,ZHOU Baoyi,et al.Tight fracture-plugging mechanism and optimized design for plugging drilling fluid[J].Acta Petrolei Sinica,2016,37(S2):137-143.
 [32] 王贵,蒲晓林.提高地层承压能力的钻井液堵漏作用机理[J].石油学报,2010,31(6):1009-1012.
 WANG Gui,PU Xiaolin.Plugging mechanism of drilling fluid by enhancing wellbore pressure[J].Acta Petrolei Sinica,2010,31(6):1009-1012.
 [33] 王明波,郭亚亮,方明君,等.裂缝性地层钻井液漏失动力学模拟及规律[J].石油学报,2017,38(5):597-606.
 WANG Mingbo,GUO Yaliang,FANG Mingjun,et al.Dynamics simulation and laws of drilling fluid loss in fractured formations[J].Acta Petrolei Sinica,2017,38(5):597-606.
 [34] 章兰珠,张万山.高温条件下有机密封材料老化机制的研究[J].润滑与密封,2008,33(11):24-27.
 ZHANG Lanzhu,ZHANG Wanshan.Study on aging mechanism of organic sealing materials in high-temperature environment[J].Lubrication Engineering,2008,33(11):24-27.
 [35] 张旭,梁杏,陈朝银,等.核桃壳的化学成分及其功能活性研究进展[J].食品研究与开发,2015,36(14):143-147.
 ZHANG Xu,LIANG Xing,CHEN Chaoyin,et al.Research progress of the chemical constituents and functional activity from walnut shell[J].Food Research and Development,2015,36(14):143-147.
 [36] 金晶,徐义根,李洁,等.考虑时间和深度效应的岩体强度影响因素分析[J].地下空间与工程学报,2016,12(增刊2):475-480.
 JIN Jing,XU Yigen,LI Jie,et al.Influencing factors analysis on rock mass strength considering time and depth effect[J].Chinese Journal of Underground Space and Engineering,2016,12(S2):475-480.
 [37] 边明明.连续压缩载荷下木材力学性能及微观结构变化定量表征[D].北京:中国林业科学研究院,2011.
 BIAN Mingming.Effects of micro-structure on wood mechanical properties under continuous compression[D].Beijing:Chinese Academy of Forestry,2011.
 [38] 史蔷,鲍甫成,吕建雄,等.热处理温度对圆盘豆木材力学性能的影响[J].林业机械与木工设备,2011,39(1):27-29.
 SHI Qiang,BAO Fucheng,LV Jianxiong,et al.Effect of heat treatment temperature on mechanical properties of okan wood[J].Forestry Machinery & Woodworking Equipment,2011,39(1):27-29.
 [39] 朱孟兆,陈玉峰,辜超,等.基于分子动力学的无定形纤维素热力学性质仿真[J].高电压技术,2015,41(2):432-439.
 ZHU Mengzhao,CHEN Yufeng,GU Chao,et al.Simulation on thermodynamic properties of amorphous cellulose based on molecular dynamics[J].High Voltage Engineering,2015,41(2):432-439.
 [40] JAEGER J C,COOK N G W,ZIMMERMAN R W.Fundamentals of rock mechanics[M].4th ed.Oxford:Blackwell Publishing,2007.
 [41] 余海峰.裂缝性储层堵漏实验模拟及堵漏浆配方优化[D].成都:西南石油大学,2014.
 YU Haifeng.Plugging experiment simulation and formula optimization of fractured reservior[D].Chengdu:Southwest Petroleum University,2014.
 [42] 孙金声,苏义脑,罗平亚,等.超低渗透钻井液提高地层承压能力机理研究[J].钻井液与完井液,2005,22(5):1-3.
 SUN Jinsheng,SU Yinao,LUO Pingya,et al.Mechanism study on ultra-low invasion drilling fluid for improvement of formation pressure-bearing ability[J].Drilling Fluid & Completion Fluid,2005,22(5):1-3.
 [43] XU Chengyuan,KANG Yili,CHEN Fei,et al.Analytical model of plugging zone strength for drill-in fluid loss control and formation damage prevention in fractured tight reservoir[J].Journal of Petroleum Science and Engineering,2017,149:686-700.
 [44] SAVARI S,KULKARNI S D,WHITFILL D L,et al.'Engineering' design of lost circulation materials (LCMs)is more than adding a word[R].SPE 173018,2015.
 |