石油学报 ›› 2005, Vol. 26 ›› Issue (2): 92-95.DOI: 10.7623/syxb200502021

• 油田开发 • 上一篇    下一篇

用荧光分析方法研究聚合物驱后微观剩余油变化

宋考平1, 李世军1, 方伟2, 吴家文1, 穆文志1   

  1. 1. 大庆石油学院石油与天然气研究中心, 黑龙江大庆, 163318;
    2. 大庆油田有限责任公司勘探开发研究院, 黑龙江大庆, 163712
  • 收稿日期:2004-04-08 修回日期:2004-07-19 出版日期:2005-03-25 发布日期:2010-05-21
  • 作者简介:宋考平,男,1962年11月生,1998年获大庆石油学院工学博士学位,现任大庆石油学院石油与天然气研究中心主任,石油工程学院副院长,博士生导师,主要从事油气藏工程方面的研究.E-mail:skp2001@sina.com
  • 基金资助:
    国家自然科学基金资助项目(No.10172028)"油层多孔介质内纳米渗流动力学模型"部分成果.

Fluorescence analysis on changeable rules of microscopic remaining oil after polymer flooding

SONG Kao-ping1, LI Shi-jun1, FANG Wei2, WU Jia-wen1, MU Wen-zhi1   

  1. 1. Oil-Gas Research Center, Daqing Petroleum Institute, Daqing 163318, China;
    2. Petroleum Exploration and Development Research Institute of Daqing Oilfield Company, Limited, Daqing 163712, China
  • Received:2004-04-08 Revised:2004-07-19 Online:2005-03-25 Published:2010-05-21

摘要: 聚合物驱后微观剩余油分布由驱油的动力和阻力两大因素决定,在这些力的共同作用下,水驱后不同类型的微观剩余油在聚合物驱后的微观分布不同。研究了聚合物驱提高驱油效率的机理,利用荧光分析方法,对比了天然岩心水驱和聚合物驱后的荧光分析图片,统计出了聚合物驱后不同类型微观剩余油的比例,给出了高、中、低不同强度水淹部位的微观剩余油分布规律。

关键词: 聚合物驱, 微观剩余油分布, 驱油机理, 荧光分析, 物理模拟

Abstract: The main factors for determining the distribution of microscopic remaining oil after polymer flooding include dynamic force and resistance for oil displacement.Under the coactions of these forces,the distribution of different kinds of microscopic remaining oil existing after water flooding stage is different from that after polymer flooding.In order to study the change and distribution rules of microscopic remaining oil,the mechanism of polymer flooding to enhance displacement efficient was studied.The result shows that polymer flooding can enhance displacement efficient and swept volume.The fluorescence analysis method was used to contrast the fluorescence analysis pictures of natural cores after water drive and polymer flooding.The statistical remaining ratio of the different kinds of microscopic remaining oil after polymer flooding were obtained,and the microscopic remaining oil distribution patterns of flooded-out parts in high,medium and low intensity were presented.

Key words: polymer flooding, microscopic remaining oil distribution, displacement mechanism, fluorescence analysis, physical simulation

中图分类号: