[1] Mcguire W J,Sikora V J.The effect of vertical fractures on well productivity[J].Journal of Petroleum Technology,1960,12(10):72-74.[2] 吴晓东,隋先富,安永生,等.压裂水平井电模拟实验研究[J].石油学报,2009,30(5):740-743.Wu Xiaodong,Sui Xianfu,An Yongsheng,et al.Electrolytic simulation experiment of fractured horizontal well[J].Acta Petrolei Sinica,2009,30(5):740-743.[3] Prats M,Hazebroek P,Strickler W R.Effect of vertical fractures on reservoir behavior--compressible-fluid case[J].SPE Journal,1962,2(2):87-94.[4] Raymond L R,Binder Jr G G.Productivity of wells in vertically fractured,damaged formations[J].Journal of Petroleum Technology,1967,19(1):120-130.[5] Economides M J,Oligney R E,Valko P.Unified fracture design:bridging the gap between theory and practice[M].Texas:Orsa Press,2002.[6] Romero D J,Valko P P,Economides M J.Optimization of the productivity index and the fracture geometry of a stimulated well with fracture face and choke skins[J].SPE Production & Facilities,2003,18(1):57-64.[7] 王永辉,赵金洲,李允.低渗透储层压裂开发的油藏数值模拟研究[J].石油学报, 2006,27(6):89-92.Wang Yonghui,Zhao Jinzhou,Li Yun.Numerical simulation for development of low-permeability reservoir[J].Acta Petrolei Sinica, 2006,27(6):89-92.[8] 甘云雁,张士诚,刘书杰,等.整体压裂井网与裂缝优化设计新方法[J].石油学报,2011,32(2):290-294.Gan Yunyan, Zhang Shicheng, Liu Shujie,et al.A new method for well pattern optimization and integral fracturing design in low permeability reservoirs[J].Acta Petrolei Sinica,2011,32(2):290-294.[9] Guo Boyun,Yu Xiance,Khoshgahdam M.A simple analytical model for predicting productivity of multifractured horizontal wells[J].SPE Reservoir Evaluation & Engineering, 2009,12(6):879-885.[10] 王立军,张晓红,马宁,等.压裂水平井裂缝与井筒成任意角度时的产能预测模型[J].油气地质与采收率,2008,15(6):73-75.Wang Lijun,Zhang Xiaohong,Ma Ning,et al.Production prediction for fractured horizontal wells as fractures at any angle to wellbore[J].Petroleum Geology and Recovery Efficiency, 2008,15(6):73-75.[11] 徐严波,齐桃,杨凤波,等.压裂后水平井产能预测新模型[J].石油学报,2006,27(1):89-91.Xu Yanbo,Qi Tao,Yang Fengbo,et al.New model for productivity test of horizontal well after hydraulic fracturing[J].Acta Petrolei Sinica, 2006,27(1):89-91.[12] Amini S,Valkó P P.Using distributed volumetric sources to predict production from multiple-fractured horizontal wells under non-Darcy-flow conditions[J].SPE Journal, 2010,15(1):105-115.[13] 刘振宇,郑宪宝,张应安.基于有限元法的人工压裂井的产能动态分析[J].大庆石油学院学报,2006,30(2):30-34.Liu Zhenyu,Zheng Xianbao,Zhang Ying’an.Production performance research of fracturing wells with finite element method[J].Journal of Daqing Petroleum Institute, 2006,30(2):30-34.[14] 蒋廷学,郎兆新,单文文,等.低渗透油藏压裂井动态预测的有限元方法[J].石油学报,2002,23(5):53-58.Jiang Tingxue,Lang Zhaoxin,Shan Wenwen,et al.Finite element method for postfracturing production performance of wells in low-permeability reservoir[J].Acta Petrolei Sinica,2002,23(5):53-58.[15] Ozkan E.Performance of horizontal wells[D].Oklahoma:The University of Tulsa,1988.[16] Valko P P,Doublet L E,Blasingame T A.Development and application of the multiwell productivity index(MPI)[J].SPE Journal,2000,5(1):21-31.[17] Romero D J.Direct boundary method to calculate pseudosteady-state productivity index of a fractured well with fracture face skin and choked skin[D].TX(USA):Texas A&M University,2001. |