钻柱涡动理论研究的必由之路——钻井液动力润滑学与钻柱动力学相结合

doi:10.7623/syxb201303027

石油学报 ›› 2013, Vol. 34 ›› Issue (3): 607-610.DOI: 10.7623/syxb201303027

• 综述 • 上一篇

钻柱涡动理论研究的必由之路——钻井液动力润滑学与钻柱动力学相结合

李子丰

燕山大学石油工程研究所河北秦皇岛 066004

收稿日期:2012-10-26 修回日期:2013-02-20 出版日期:2013-05-25 发布日期:2013-04-09
通讯作者: 李子丰
作者简介:李子丰,男,1962年7月生,1983年毕业于大庆石油学院,1992年获石油大学(北京)博士学位,现为燕山大学石油工程研究所教授、博士生导师,主要研究方向为油气田开发工程、油气井工程及油气井杆管柱力学。Email:zfli@ysu.edu.cn
基金资助:
国家自然科学基金项目(No.51244004)资助。

An inevitable way in drill-string whirling research: combination of drilling fluid power lubrication with drill string dynamics

LI Zifeng

Institute of Petroleum Engineering, Yanshan University, Qinhuangdao 066004, China

Received:2012-10-26 Revised:2013-02-20 Online:2013-05-25 Published:2013-04-09

摘要/Abstract

摘要：

浸泡在钻井液内的旋转受压钻柱,在屈曲和涡动的作用下,容易发生疲劳断裂和使井眼倾斜。对此现象业界已进行了较深入的研究,但还有一些问题没有解决,如随着井斜角的增加涡动现象减小直至消失的原因、屈曲后的钻柱是否一定与井壁接触、钻柱表面与井壁间是否存在滑动及滑动的影响因素、钻柱的稳定性和偏心率随转速的变化规律等。为了寻求上述问题的研究方法,在介绍钻柱的正弦屈曲和螺旋屈曲、旋转钻柱的最大涡动角速度、旋转钻柱与钻井液的相互作用、旋转钻柱与井壁的碰撞和涡动4方面的研究进展基础上,分析了这些研究方法中存在的问题,提出钻井液动力润滑学与钻柱动力学相结合是钻柱涡动理论研究的必然。

关键词: 钻柱, 涡动, 屈曲, 润滑, 稳定性

Abstract:

Under the action of buckling and whirling, the compressed rotary drill string immersed in drilling fluid is readily to fatigue failure, which may result in well deviation. This topic has been studied more thoroughly, but many problems remain yet to be resolved. For example, what is the reason that as the deviation angle of a well increases, the whirling phenomenon decreases until disappears, whether the buckled drill string must touch wellbore walls or not, whether there exists sliding between the drill string surface and wellbore walls or not, if so, what factors affect the sliding, how the stability of drill string couples with rotary speed, and how the eccentricity of drill string varies with rotary speed. In order to search for research methods to solve these problems, research advances have been introduced in sinusoidal buckle and helical buckle of the rotary drill string,the maximum whirling angular velocity of rotary drill string, interaction between rotary drill string and drilling fluid, and collision between rotary drill string and wellbore walls. Problems remaining in these research methods were investigated and it was pointed out that the combination of drilling fluid power lubrication with drill-string dynamics is an inevitable way in drill-string whirling research.

Key words: drill string, whirling, buckle, lubrication, stability

中图分类号:

TE 21

李子丰. 钻柱涡动理论研究的必由之路——钻井液动力润滑学与钻柱动力学相结合[J]. 石油学报, 2013, 34(3): 607-610.

LI Zifeng. An inevitable way in drill-string whirling research: combination of drilling fluid power lubrication with drill string dynamics[J]. Editorial office of ACTA PETROLEI SINICA, 2013, 34(3): 607-610.

参考文献

[1] Lubinski A.A study of the buckling of rotary drilling strings[C]//API.Drilling and Production Practice.Dallas:API,1950:178-214.

[2] 李子丰.油气井杆管柱力学及应用[M].北京:石油工业出版社,2008:1-44.

Li Zifeng.Tubular mechanics in oil-gas wells and its applications[M].Beijing:Petroleum Industry Press,2008:1-44.

[3] 张广清,陈勉,路永明.斜直井段旋转钻柱稳定性试验研究[J].石油钻采工艺,2001,23(1):23-25.

Zhang Guangqing,Chen Mian,Lu Yongming.Test study on drilling stem stability of rotary drilling in the slant hole[J].Oil Drilling & Production Technology,2001,23(1):23-25.

[4] 袁张贤,王鑫伟.斜直圆筒内基于Euler-Rodrigues 参数的细长杆螺旋屈曲研究[J].计算物理,2012,29(4):549-556.

Yuan Zhangxian,Wang Xinwei.Helix buckling of a slender rod in inclined cylinder:analysis with Euler-Rodrigues parameters[J].Chinese Journal of Computational Physics,2012,29(4):549-556.

[5] 章扬烈,肖载阳,端木纲.旋转钻柱运动原理的研究[J].石油矿场机械,1988,12(2):1-7.

Zhang Yanglie,Xiao Zaiyang,Duanmu Gang.Research on rotary drill string movement principle[J].Oil Field Equipment,1988,12(2):1-7.

[6] 章扬烈.钻柱运动学与动力学[M].北京:石油工业出版社,2001.

Zhang Yanglie.Drillstring kinematics and dynamics[M].Beijing:Petroleum Industry Press,2001.

[7] Melakhessou H,Berlioz A,Ferraris G.A nonlinear well-drillstring interaction model[J].Journal of Vibration and Acoustics,2003,125(1):46-52.

[8] Liao C M,Vlajic N,Karki H,et al.Parametric studies on drill-string motions[J].International Journal of Mechanical Sciences,2012,54(1):260-268.

[9] 管志川,靳彦欣,王以法.直井底部钻柱运动状态的实验研究[J].石油学报,2003,24(6):102-106.

Guan Zhichuan,Jin Yanxin,Wang Yifa.Experimental research on motion behavior of bottom drill string in straight hole[J].Acta Petrolei Sinica,2003,24(6):102-106.

[10] 史玉才,王军,朱江,等.下部钻柱反向涡动机理研究[J].石油钻探技术,2007,35(5):43-45.

Shi Yucai,Wang Jun,Zhu Jiang,et al.Research on backward whirling mechanism of bottom drillstring[J].Petroleum Drilling Techniques,2007,35(5):43-45.

[11] 屈展,张绍槐.内含钻井液的钻柱涡动动力特性分析[J].天然气工业,1994,14(1):46-48.

Qu Zhan,Zhang Shaohuai.Analysing dynamic characteristics of drilling string eddy of inside containing drill fluid[J].Natural Gas Industry,1994,14(1):46-48.

[12] 屈展.钻井液流体力引起旋转石油钻柱涡动的理论分析[J].力学与实践,1994,16(3):49-51.

Qu Zhan.Theoretical analysis of drilling fluid cause rotary drill string whirl[J].Mechanics and Practice,1994,16(3):49-51.

[13] 屈展,徐健学.内外钻井液作用下的旋转钻柱涡动分析[J].西安石油学院学报:自然科学版,1997,12(1):27-29.

Qu Zhan,Xu Jianxue.Whirling analysis of the rotary drill string by the action of drilling fluid inside and outside the drill string[J].Journal of Xi’an Petroleum Institute:Natural Science Edition,1997,12(1):27-29.

[14] 李子丰,李敬元,马兴瑞,等.钻柱自转和公转诱发牛顿液体层流流动的数学模型[J].力学与实践,1995,17(5):51-53.

Li Zifeng,Li Jingyuan,Ma Xingrui,et al.Mathematical model of Newton liquid laminar flow induced by drillstring rotation and revolution[J].Mechanics and Practice,1995,17(5):51-53.

[15] 崔海清,刘希圣.幂律流体偏心环空螺旋流中的二次流问题[J].水动力学研究与进展:A辑,1995,10(6):610-620.

Cui Haiqing,Liu Xisheng.On the secondary flow in the helical flow of the power-law fluids in eccentric annuli[J].Journal of Hydrodynamics:Series A,1995,10(6):610-620.

[16] 崔海清,刘希圣.非牛顿流体偏心环形空间螺旋流的速度分布[J].石油学报,1996,17(2):76-82.

Cui Haiqing,Liu Xisheng.Velocity distribution of helical flow of non-Newtonian fluid in eccentric annuli[J].Acta Petrolei Sinica,1996,17(2):76-82.

[17] 崔海清,季海军,蔡萌,等.流体在内管做行星运动的环空中流动的二次流[J].大庆石油学院学报,2005,29(2):16-18.

Cui Haiqing,Ji Haijun,Cai Meng,et al.The secondary flow in Newtonian fluid flow in annulus with the inner cylinder executing a planetary motion[J].Journal of Daqing Petroleum Institute,2005,29(2):16-18.

[18] 崔海清,裴晓含,蔡萌.幂律流体在内管做行星运动的环空中流动的二次流[J].石油学报,2007,28(1):134-138.

Cui Haiqing,Pei Xiaohan,Cai Meng.Secondary flow of power-law fluid flow in annulus with inner cylinder executing a planetary motion[J].Acta Petrolei Sinica,2007,28(1):134-138.

[19] 崔海清,修德艳,裴晓含,等.幂律流体在内管做行星运动的环空中流动时的内管法向应力分布[J].中国石油大学学报:自然科学版,2007,31(1):67-71.

Cui Haiqing,Xiu Deyan,Pei Xiaohan,et al.Normal stress distribution on the inner cylinder forced by power law fluid flowing in annulus with inner cylinder executing a planetary motion[J].Journal of China University of Petroleum:Edition of Natural Science,2007,31(1):67-71.

[20] 肖文生,张扬,钟毅芳.钻柱在钻井液和井壁摩阻共同作用下的涡动[J].中国机械工程,2004,15(4):334-337.

Xiao Wensheng,Zhang Yang,Zhong Yifang.Annulus whirling motion analysis of the rotary drill string under the actions of rubs between well-walls and drilling fluids[J].China Mechanical Engineering,2004,15(4):334-337.

[21] 徐海波,朱均.径向滑动轴承中流体从层流到紊流的流动分析和转变判据研究[J].西安交通大学学报,1993,27(3):7-13.

Xu Haibo,Zhu Jun.The research of fluid flow and flow transition criteria from laminar to turbulent in a journal bearing[J].Journal of Xi’an Jiaotong University,1993,27(3):7-13.

[22] 徐海波,沈允文,朱均.无限长偏心旋转圆柱间Taylor 涡动问题研究[J].西北工业大学学报,1995,13(2):168-172.

Xu Haibo,Shen Yunwen,Zhu Jun.On Taylor vortex flow in infinite-length eccentric cylinders[J].Journal of Northwestern Polytechnical University,1995,13(2):168-172.

[23] 杨军,郭力,卿红.动静压推力轴承动特性分析[J].润滑与密封,2001(1):42-43.

Yang Jun,Guo Li,Qing Hong.Dynamic analysis of hybrid thrust bearing with shallow recess[J].Lubrication Engineering,2001(1):42-43.

[24] 杨军,郭力,卿红.偏心率对高速动静压轴承动特性影响[J].润滑与密封,2001(2):5-6.

Yang Jun,Guo Li,Qing Hong.Effect of eccentricity on the dynamic characteristic of a hybrid bearing [J].Lubrication Engineering,2001(2):5-6.

[25] 陈晓阳,张直明,马家驹.有限长线接触弹流润滑研究的现状与展望[J].摩擦学学报,1997,17(3):281-288.

Chen Xiaoyang,Zhang Zhiming,Ma Jiaju.Prospects for elastohydrodynamic lubrication of finite line contacts[J].Tribology,1997,17(3):281-288.

[26] 康剑莉,陈罡,马子余.纯挤压弹流润滑研究进展[J].液压与气动,2005(6):9-11.

Kang Jianli,Chen Gang,Ma Ziyu.Status and development of elastohydrodynamic lubrication study of pure squeeze[J].Chinese Hydraulics & Pneumatics,2005(6):9-11.

[27] 温诗铸,黄平.摩擦学原理[M].北京:清华大学出版社,2008:78-116.

Wen Shizhu,Huang Ping.Principles of tribology[M].Beijing:Tsinghua University Press,2008:78-116.

[28] Theron A,de Langre E,Putot C.The effect of dynamical parameters on precession in rotary drilling[J].Journal of Energy Resources Technology,2001,123(11):181-186.

[29] 狄勤丰,吴玉禄,石向前.预弯曲动力学防斜打快技术初探[J].石油学报,2003,24(3):86-89.

Di Qinfeng,Wu Yulu,Shi Xiangqian.Primary research on vertical and fast drilling technology with pre-bending dynamic method[J].Acta Petrolei Sinica,2003,24(3):86-89.

[30] 狄勤丰,王文昌.胡以宝,等.钻柱动力学研究及应用进展[J].天然气工业,2006,26(4):57-59.

Di Qinfeng,Wang Wenchang,Hu Yibao,et al.Study and application of drilling string dynamics[J].Natural Gas Industry,2006,26(4):57-59.

[31] 狄勤丰,朱卫平,姚建林,等.预弯曲动力学防斜打快钻具组合动力学模型[J].石油学报,2007,28(6):118-121.

Di Qinfeng,Zhu Weiping,Yao Jianlin,et al.Dynamic model of bottom hole assembly used in pre-bending dynamic vertical and fast drilling technology[J].Acta Petrolei Sinica,2007,28(6):118-121.

[32] 姚建林,狄勤丰,胡以宝,等.空气钻井斜直井眼中钻柱的动力学特性及失效机理[J].中国石油大学学报:自然科学版,2008,32(3):63-67.

Yao Jianlin,Di Qinfeng,Hu Yibao,et al.Dynamic characteristics and failure mechanism of drill string in straight hole with air drilling[J].Journal of China University of Petroleum:Edition of Natural Science,2008,32(3):63-67.

[33] 狄勤丰,朱卫平,姚建林,等.空气钻井钻具组合动力学特征及井斜机理研究[J].石油学报,2008,29(6):917-921.

Di Qinfeng,Zhu Weiping,Yao Jianlin,et al.Dynamic features of bottom hole assembly and borehole deviation mechanism in air drilling[J].Acta Petrolei Sinica,2008,29(6):917-921.

[34] 狄勤丰,王文昌,姚永汉,等.底部钻具组合动力学模型及涡动特性仿真[J].中国石油大学学报:自然科学版,2010,34(3):53-56.

Di Qinfeng,Wang Wenchang,Yao Yonghan,et al.Dynamics model and whirl features’ simulation of bottom hole assembly[J].Journal of China University of Petroleum:Edition of Natural Science,2010,34(3):53-56.

[35] 胡以宝,狄勤丰,王文昌,等.斜直井眼中转速对钻柱动力学特性的影响[J].工程力学,2010,27(5):184-190.

Hu Yibao,Di Qinfeng,Wang Wenchang,et al.Influence of rotary table speed on the dynamic characteristics of drillsting in inclined straight hole[J].Engineering Mechanics,2010,27(5):184-190.

[36] 罗敏.管道内旋转细长梁固液耦合动力学分析[D].大庆:大庆石油学院,2009.

Luo Min.Fluid-structure interaction dynamic analysis of rotary slender beam in pipe[D].Daqing:Daqing Petroleum Institute,2009.

[37] 张强,刘巨保,罗敏,等.圆筒内旋转细长管与流体界面耦合的数值方法[J].计算力学学报,2011,28(4):601-606.

Zhang Qiang,Liu Jubao,Luo Min,et al.Numerical simulation on interface coupling of rotary slender pipe and fluid in cylinder[J].Chinese Journal of Computational Mechanics,2011,28(4):601-606.

[38] 刘巨保,罗敏,王琳,等.管道内旋转细长梁的固液耦合方法研究[J].工程力学,2011,28(4):251-256.

Liu Jubao,Luo Min,Wang Lin,et al.Methodology of fluid-structure interaction of rotary slender beam in pipe [J].Engineering Mechanics,2011,28(4):251-256.

[39] 李子丰,李敬元,马兴瑞,等.油气井杆管柱动力学基本方程及应用[J].石油学报,1999,20(3):87-90.

Li Zifeng,Li Jingyuan,Ma Xingrui,et al.Fundamental equations and its applications for dynamical analysis of rod and pipe string in oil and gas wells[J].Acta Petrolei Sinica,1999,20(3):87-90.

[40] Li Zifeng,Li Jingyuan.Fundamental equations for dynamic analysis of rod and pipe string in oil-gas wells and application in static buckling analysis[J].Journal of Canadian Petroleum Technology,2002,41(5):44-53.

[41] 周筑宝,唐松花.功耗率最小与工程力学中的各类变分原理[M].北京:科学出版社,2007:29-42.

Zhou Zhubao,Tang Songhua.Minimum power consumption rate and variational principles in engineering mechanics[M].Beijing:Science Press,2007:29-42.

钻柱涡动理论研究的必由之路——钻井液动力润滑学与钻柱动力学相结合

An inevitable way in drill-string whirling research: combination of drilling fluid power lubrication with drill string dynamics

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	狄勤丰, 骆大坤, 周星, 王文昌, 陈锋. 横向主动控斜力作用下底部钻具组合动力学特征[J]. 石油学报, 2023, 44(9): 1552-1561,1573.
[2]	高永海, 尹法领, 张党生, 孙小辉, 赵欣欣, 陈野, 孙宝江. 水合物储层水平井钻井井筒-储层耦合模型与井壁稳定性分析[J]. 石油学报, 2023, 44(7): 1151-1166.
[3]	葛际江, 师小娟, 刘子铭, 郭洪宾, 李隆杰, 周代余, 王伟. 盐水中月桂酰胺丙基二甲铵基羟磺基甜菜碱的含量测定及热稳定性[J]. 石油学报, 2022, 43(4): 524-532.
[4]	柳军, 杜智刚, 郭晓强, 殷腾, 俞海, 曹大勇. 水平井裸眼分段压裂完井管柱下入屈曲磨损预测模型及规律[J]. 石油学报, 2022, 43(11): 1632-1641.
[5]	张明贺, 杨进, 刘和兴, 李磊, 傅超, 杨宇翔, 徐东升, 马阔. 膨胀式导管提高深水钻井水下井口承载力的机理[J]. 石油学报, 2021, 42(6): 791-800.
[6]	朱华银, 王粟, 张敏, 武志德, 石磊. 盐穴储气库全周期注采模拟——以JT储气库X1和X2盐腔为例[J]. 石油学报, 2021, 42(3): 367-377.
[7]	黄文君, 张星坤, 高德利, 石小磊, 苏鹏. 复合模式下套管磨损形状与深度计算模型[J]. 石油学报, 2021, 42(10): 1373-1381.
[8]	李文婧, 姜源, 单保东, 禹晓珊, 王超. 盐穴储气库注采运行时温效应对腔体稳定性的影响[J]. 石油学报, 2020, 41(6): 762-776.
[9]	刘静, 夏军勇, 刘玺, 吴飞鹏, 蒲春生. 低频波对泡沫稳定性协同强化效应[J]. 石油学报, 2020, 41(5): 584-591.
[10]	张彦廷, 郑志滨, 陈敬凯, 黄鲁蒙, 张晧, 王志坤, 葛政. 石油钻柱顶部高频激振解卡耦合响应特性[J]. 石油学报, 2020, 41(12): 1697-1705.
[11]	王成文, 王桓, 薛毓铖, 杨乐, 王瑞和, 靳建洲, 李勇. 高密度水泥浆高温沉降稳定调控热增黏聚合物研制与性能[J]. 石油学报, 2020, 41(11): 1416-1424.
[12]	高德利, 王宴滨. 海洋深水钻井力学与控制技术若干研究进展[J]. 石油学报, 2019, 40(S2): 102-115.
[13]	李子丰. 油气井管柱冲击动力问题研究概况和发展趋势[J]. 石油学报, 2019, 40(5): 604-610.
[14]	杨进. 深水油气井表层导管下入深度计算方法[J]. 石油学报, 2019, 40(11): 1396-1406.
[15]	王长进, 李子丰, 李银朋, 戚珉, 王磊. 充满液体的圆筒中受压屈曲杆柱旋转实验[J]. 石油学报, 2018, 39(3): 341-348.