海洋深水钻井力学与控制技术若干研究进展

doi:10.7623/syxb2019S2010

石油学报 ›› 2019, Vol. 40 ›› Issue (S2): 102-115.DOI: 10.7623/syxb2019S2010

海洋深水钻井力学与控制技术若干研究进展

高德利^1,2, 王宴滨¹

1. 中国石油大学(北京)石油工程教育部重点实验室北京 102249;
2. 汕头大学土木与环境工程系广东汕头 515063

收稿日期:2019-09-24 修回日期:2019-12-06 出版日期:2019-12-25 发布日期:2020-04-24
通讯作者: 高德利,男,1958年4月生,1982年获华东石油学院工学学士学位,1990年获石油大学(北京)工学博士学位,现为中国石油大学(北京)教授、博士生导师、中国科学院院士,主要从事油气井力学与控制工程方面研究工作。Email:gaodeli@cup.edu.cn
作者简介:高德利,男,1958年4月生,1982年获华东石油学院工学学士学位,1990年获石油大学(北京)工学博士学位,现为中国石油大学(北京)教授、博士生导师、中国科学院院士,主要从事油气井力学与控制工程方面研究工作。Email:gaodeli@cup.edu.cn
基金资助:
国家自然科学基金创新研究群体项目（No.51821092）、国家科技重大专项（2017ZX05009-003）、国家重点研发计划项目（2016YFC0303303）和国家自然科学基金青年科学基金项目（No.51804321）资助。

Some research progress in deepwater drilling mechanics and control technology

Gao Deli^1,2, Wang Yanbin¹

1. MOE Key Laboratory of Petroleum Engineering, China University of Petroleum, Beijing 102249, China;
2. Department of Civil and Environmental Engineering, Shantou University, Guangdong Shantou 515063, China

Received:2019-09-24 Revised:2019-12-06 Online:2019-12-25 Published:2020-04-24

摘要/Abstract

摘要：

深水钻井是深水条件下海洋油气工程关键环节之一。与近海浅水钻井不同，深水钻井必须面对更为复杂的海洋深水环境和作业条件，面临"下海、入地"的双重挑战，需要使用浮式钻井作业平台，采用特殊的深水管具系统（包括深水导管、送入管柱、钻井隔水管、套管柱等）、水下智能控制系统等，建立安全稳定的水下井口与钻井系统，具有高科技、高投入及高风险等基本特征。深水钻井管具是实施深水钻井工程不可或缺的基本工具，深水钻井管具系统在服役过程中受到海洋深水环境载荷和作业载荷的作用，表现出复杂的力学行为。通过主要介绍深水送入管柱、深水导管、深水钻井隔水管及深水水下井口等方面的研究进展，对深水钻井管具力学研究与工程实践具有参考价值。

关键词: 深水钻井, 钻柱力学, 设计控制技术, 深水导管, 钻井隔水管, 水下井口

Abstract:

Deepwater drilling is one of the key processes in oil and gas engineering under deepwater conditions.Compared with drilling engineering in shallow water, deepwater drilling engineering is confronted with more complicated marine environment and geological conditions and needed to conquer dual challenges:diving into the ocean and drilling into the formation.Besides, floating drilling platform, security and stability of subsea wellhead and drilling system, special deepwater string (conductor, landing string, drilling riser and casing string), intelligent subsea equipment and control system are necessary in deepwater drilling.It is characterized by high technology, high investment and high risk.Deepwater drilling tubulars and tools are indispensable and basic in deepwater drilling engineering, which are subjected to marine environment and operational load and present complex mechanical behavior. This paper introduces the research progress in deepwater landing string, conductor, drilling riser, and subsea wellhead.This study has reference value for the mechanical research and engineering practice of deepwater drillingtubulars and tools.

Key words: deepwater drilling, drill string mechanics, design and control technology, deepwater conductor, drilling riser, subsea wellhead

中图分类号:

TE22

高德利, 王宴滨. 海洋深水钻井力学与控制技术若干研究进展[J]. 石油学报, 2019, 40(S2): 102-115.

Gao Deli, Wang Yanbin. Some research progress in deepwater drilling mechanics and control technology[J]. Acta Petrolei Sinica, 2019, 40(S2): 102-115.

参考文献

[1] 高德利.复杂井工程力学与设计控制技术[M].北京:石油工业出版社,2018.
GAO Deli.Downhole mechanics and design & control techniques in critical well engineering[M].Beijing:Petroleum Industry Press,2018.
[2] 路保平.深水钻井关键技术与装备[M].北京:中国石化出版社,2014.
LU Baoping.Key technologies and equipments for deepwater drilling[M].Beijing:China Petrochemical Press,2014.
[3] ROCHA L A S,JUNQUEIRA P,ROQUE J L.Overcoming deep and ultra deepwater drilling challenges[R].OTC 15233,2003.
[4] CHARLEZ P A,SIMONDIN A.A collection of innovative answers to solve the main problematics encountered when drilling deep water prospects[R].OTC 15234,2003.
[5] CUNHA J C.Innovative design for deepwater exploratory well[R].SPE 87154,2004.
[6] LEACH C,BAMFORD T.Use of drilled-in casing in slim deepwater exploration wells[R].SPE 92560,2005.
[7] 杨进,曹式敬.深水石油钻井技术现状及发展趋势[J].石油钻采工艺,2008,30(2):10-13.
YANG Jin,CAO Shijing.Current situation and developing trend of petroleum drilling technologies in deep water[J].Oil Drilling & Production Technology,2008,30(2):10-13.
[8] 陈建兵.深水探井钻井工程设计方法[M].北京:石油工业出版社,2014.
CHEN Jianbing.Design method of deepwater exploration wells[M].Beijing:Petroleum Industry Press,2014.
[9] 张辉.深水导管设计与安装力学行为研究[D].北京:中国石油大学(北京),2010.
ZHANG Hui.Research on mechanical behavior of drillstring in jetting conductor operation under deepwater condition[D].Beijing:China University of Petroleum,2010.
[10] ADAMS R J.Proven landing string design for ultra-deepwater application[J].World Oil,2001,222(7):73-79.
[11] JELLISON M J,PAYNE M L,SHEPARD J S,et al.Next generation drill pipe for extended reach,deepwater and ultra-deep drilling[R].OTC 15327,2003.
[12] 周俊昌,付英军,朱荣东.深水钻井送入管柱技术及其发展趋势[J].石油钻探技术,2014,42(6):1-7.
ZHOU Junchang,FU Yingjun,ZHU Rongdong.Design method and development trend of landing strings in deepwater drilling[J].Petroleum Drilling Techniques,2014,42(6):1-7.
[13] CANTRELL A J,BEIRIGER C N,HUBBARD B L,et al.Design and qualification of critical landing string assemblies for deepwater wells[R].SPE 112787,2008.
[14] SATHUVALLI U B,PAYNE M L,SURYANARAYANA P V,et al.Advanced slip crushing considerations for deepwater drilling[R].SPE 74488,2002.
[15] SIMPSON B R,PAYNE M L,JESSISON M L,et al.2,000,000 lb.landing string developments:novel slipless technology extends the deepwater operating envelope[J].SPE Drilling & Completion,2005,20(2):109-122.
[16] BROCK J N,CHANDLER R B,SANCLEMENTE L W,et al.2 million-lbm slip-based landing string system pushes the limit of deepwater casing running[R].OTC 18496,2007.
[17] BROCK J N,CHIN D S,SANCLEMENTE L W.2,500,000-pound landing string challenges:have we reached the limit of today[R].OTC 20823,2010.
[18] 高德利,张辉.无隔水管深水钻井作业管柱的力学分析[J].科技导报,2012,30(4):37-42.
GAO Deli,ZHANG Hui.Mechanical analysis of tubes in deepwater drilling operation without riser[J].Science & Technology Review,2012,30(4):37-42.
[19] ZHANG Hui,GAO Deli,TANG Haixiong.Landing string design and strength check in ultra-deepwater condition[J].Journal of Natural Gas Science and Engineering,2010,2(4):178-182.
[20] 张辉,高德利,唐海雄.喷射安装导管作业中喷射管串力学分析[J].西南石油大学学报:自然科学版,2009,31(6):148-151.
ZHANG Hui,GAO Deli,TANG Haixiong.Mechanics analysis of jetting string during jetting operation of conductor[J].Journal of Southwest Petroleum University:Science & Technology Edition,2009,31(6):148-151.
[21] 张辉,高德利,唐海雄,等.深水导管喷射安装过程中管柱力学分析[J].石油学报,2010,31(3):516-520.
ZHANG Hui,GAO Deli,TANG Haixiong,et al.Tubular mechanics in jetting operation of conductor under deepwater condition[J].Acta Petrolei Sinica,2010,31(3):516-520.
[22] EVERAGE S D,ZHENG N J,SEAN E E.Evaluation of heave-induced dynamic loading on deepwater landing strings[J].SPE Drilling & Completion,2004,20(4):203-237.
[23] ZHENG N J,BAKER J M,EVERAGE S D.Further considerations of heave-induced dynamic loading on deepwater landing strings[R].SPE 92309,2005.
[24] American Petroleum Institute.Recommended practice for drill stem design and operating limits:API RP 7G[S].Washington D.C.:American Petroleum Institute,1998.
[25] BAILEY E I,SMITH J E.The Goodman diagram as an analytical tool to optimize fatigue life of rotary shouldered connections[R].SPE 79874,2003.
[26] 汪顺文,杨进,严德,等.深水表层导管喷射钻进机理研究[J].石油天然气学报(江汉石油学院学报),2012,34(8):157-160.
WANG Shunwen,YANG Jin,YAN De,et al.Research of jetting drilling mechanism of surface conductor in deepwater[J].Journal of Oil and Gas Technology(Journal of Jianghan Petroleum Institute),2012,34(8):157-160.
[27] 杨进,彭苏萍,周建良,等.海上钻井隔水导管最小入泥深度研究[J].石油钻采工艺,2002,24(2):1-3.
YANG Jin,PENG Suping,ZHOU Jianliang,et al.Study on the minimum driving depth of offshore drilling riser[J].Oil Drilling & Production Technology,2002,24(2):1-3.
[28] 付英军,姜伟,朱荣东.深水表层导管安装方法及风险控制技术研究[J].石油天然气学报(江汉石油学院学报),2011,33(6):153-157.
FU Yingjun,JIANG Wei,ZHU Rongdong.Installation method and risk control technology of surface conductors[J].Journal of Oil and Gas Technology (Journal of Jianghan Petroleum Institute),2011,33(6):153-157.
[29] 刘书杰,杨进,周建良,等.深水海底浅层喷射钻进过程中钻压与钻速关系[J].石油钻采工艺,2011,33(1):12-15.
LIU Shujie,YANG Jin,ZHOU Jianliang,et al.Research on relationship between weight-on-bit and drilling rate during jetting drilling in sub-bottom deepwater[J].Oil Drilling & Production Technology,2011,33(1):12-15.
[30] 杨进,严德,田瑞瑞,等.深水喷射下表层导管合理钻头伸出量计算[J].石油勘探与开发,2013,40(3):367-370.
YANG Jin,YAN De,TIAN Ruirui,et al.Bit stick-out calculation for the deepwater conductor jetting technique[J].Petroleum Exploration and Development,2013,40(3):367-370.
[31] 高德利,王宴滨.深水钻井管柱力学与设计控制技术研究新进展[J].石油科学通报,2016,1(1):61-80.
GAO Deli,WANG Yanbin.Progress in tubular mechanics and design control techniques for deep-water drilling[J].Petroleum Science Bulletin,2016,1(1):61-80.
[32] 王宴滨.深水导管和隔水管安装过程力学行为研究[D].北京:中国石油大学(北京),2016.
WANG Yanbin.Research on mechanical behavior of deepwater conductor and drilling riser in installations[D].Beijing:China University of Petroleum,2016.
[33] BECK R D,JACKSON C W,HAMILTON T K.Reliable deepwater structural casing installation using controlled jetting[R].SPE 22542,1991.
[34] JEANJEAN P.Re-assessment of P-Y curves for soft clays from centrifuge testing and finite element modeling[R].OTC 20158,2009.
[35] 杨进.深水油气井表层导管下入深度计算方法[J].石油学报,2019,40(11):1396-1406.
YANG Jin.Calculation method of surface conductor setting depth in deepwater oil and gas wells[J].Acta Petrolei Sinica,2019,40(11):1396-1406.
[36] 管志川,苏堪华,苏义脑.深水钻井导管和表层套管横向承载能力分析[J].石油学报,2009,30(2):285-290.
GUAN Zhichuan,SU Kanhua,SU Yinao.Analysis on lateral load-bearing capacity of conductor and surface casing for deepwater drilling[J].Acta Petrolei Sinica,2009,30(2):285-290.
[37] Wang Y B,Gao D L,FANG J,et al.On the stability of subsea wellhead in deepwater drilling:based on the bearing capacity of conductor[R].ISOPE-I-18-090,2018.
[38] WANG Y B,GAO D L,FANG J.Finite element analysis of deepwater conductor bearing capacity to analyze the subsea wellhead stability with consideration of contact interface models between pile and soil[J].Journal of Petroleum Science and Engineering,2015,126:48-54.
[39] WANG Y B,GAO D L,FANG J.Static analysis of deep-water marine riser subjected to both axial and lateral forces in its installation[J].Journal of Natural Gas Science and Engineering,2014,19:84-90.
[40] WANG Y B,GAO D L,FANG J.Axial dynamic analysis of marine riser in installation[J].Journal of Natural Gas Science and Engineering,2014,21:112-117.
[41] WANG Y B,GAO D L,FANG J.Study on lateral vibration analysis of marine riser in installation-via variational approach[J].Journal of Natural Gas Science and Engineering,2015,22:523-529.
[42] WANG Y B,GAO D L,FANG J.Mechanical behavior analysis for the determination of riser installation window in offshore drilling[J].Journal of Natural Gas Science and Engineering,2015,24:317-323.
[43] BURKE B G.An analysis of marine risers for deep water[R].OTC 1771,1973.
[44] 周守为,刘清友,姜伟,等.深水钻井隔水管"三分之一效应"的发现-基于海流作用下深水钻井隔水管变形特性理论及实验的研究[J].中国海上油气,2013,25(6):1-7.
ZHOU Shouwei,LIU Qingyou,JIANG Wei,et al.The discovery of "one third effect" for deep water drilling riser:based on the theoretical and experimental study of deformation characteristics of deep water drilling riser by ocean currents[J].China Offshore Oil and Gas,2013,25(6):1-7.
[45] 李妍,吴艳新,高德利.深水钻井隔水管纵横弯曲变形解析[J].石油矿场机械,2011,40(7):21-24.
LI Yan,WU Yanxin,GAO Deli.Analytic solution of flexural deformation of deep-water drilling riser[J].Oil Field Equipment,2011,40(7):21-24.
[46] 周俊昌.海洋深水钻井隔水管系统分析[D].成都:西南石油学院,2001.
ZHOU Junchang.The research on drilling riser system of offshore deep water[D].Chengdu:Southwest Petroleum Institute,2001.
[47] SIMMONDS D G.Dynamic analysis of the marine riser[R].SPE 9735,1980.
[48] 竺艳蓉.海洋工程波浪力学[M].天津:天津大学出版社,1991.
ZHU Yanrong.Wave mechanics for ocean engineering[M].Tianjin:Tianjin University Press,1991.
[49] EGELAND O,WIIK T,NATVIG B J.Dynamic analysis of marine risers[R].SPE 10420,1982.
[50] SEXTON R M,AGBEZUGE L K.Random wave and vessel motion effects on drilling riser dynamics[R].OTC 2650,1976.
[51] ATADAN S,CAUSAL S M,MOTH V J,et al.Analysis and numerical analysis of the dynamics of a marine riser connected to a floating platform[J].Ocean Engineering,1991,24(2):111-131.
[52] 贾星兰,方华灿.海洋钻井隔水管的动力响应[J].石油机械,1995,23(8):18-22.
JIA Xinglan,FANG Huacan.Dynamic response of riser system in marine drilling[J].China Petroleum Machinery,1995,23(8):18-22.
[53] 李华桂.海洋钻井隔水管的动力分析[J].石油学报,1996,17(1):122-126.
LI Huagui.Dynamic analysis of offshore drilling riser[J].Acta Petrolei Sinica,1996,17(1):122-126.
[54] 曾诚.基于内外流耦合作用的隔水管力学特性研究[D].成都:西南石油大学,2016.
ZENG Cheng.Mechanical properties of risers based on internal and external coupling effect[D].Chengdu:Southwest Petroleum University,2016.
[55] 刘清友,朱军凯,毛良杰.深水钻井工况下隔水管横向振动特性研究[J].西南石油大学学报:自然科学版,2016,38(5):1-8.
LIU Qingyou,ZHU Junkai,MAO Liangjie.Study of characteristics of lateral vibration of the riser in deepwater drilling condition[J].Journal of Southwest Petroleum University:Science & Technology Edition,2016,38(5):1-8.
[56] 王林,石晓兵,聂荣国,等.轴向载荷对海洋深水钻井隔水管力学特性的影响分析[J].石油矿场机械,2004,(1):30-32.
WANG Lin,SHI Xiaobing,NIE Rongguo,et al.Analysis of axial load influence on mechanics characteristic of ocean deep water drilling riser[J].Oil Field Equipment,2004,33(1):30-32.
[57] 王腾,张修占,朱为全.平台运动下深水钻井隔水管非线性动力响应研究[J].海洋工程,2008,26(3):21-26.
WANG Teng,ZHANG Xiuzhan,ZHU Weiquan.Study on nonlinear dynamic response of deepwater Drilling riser with vessel motions[J].The Ocean Engineering,2008,26(3):21-26.
[58] 李军强,方同.海洋钻井隔水管随机振动的理论分析[J].石油机械,2000,28(8):47-49.
LI Junqiang,FANG Tong.Theoretic analysis for random vibration of riser system in marine drilling[J].China Petroleum Machinery,2000,28(8):47-49.
[59] YOUNG R D,HOCK C J,KARLSEN G,et al.Analysis and design of anti-recoil system for emergency disconnect of a deepwater riser:case study[R].OTC 6891,1992.
[60] YOUNG R D,HOCK C J,KARLSEN G,et al.Comparison of analysis and full-scale testing of anti-recoil system for emergency disconnect of deepwater riser[R].OTC 6892,1992.
[61] WILLIAM F P,Reid V N.Riser recoil during unscheduled lower marine riser package disconnects[R].SPE 39296,1998.
[62] MATTEW J S,MOMEN W,BREKKE J N.Riser recoil analysis at a harsh environment,deepwater site[R].OMAE 2004-51628,2004.
[63] GRYTOYR G,RUSTAD A M,SODAHL N,et al.Methodology for disconnect analysis of CWO risers in random seas[R].OMAE 2009-79130,2009.
[64] GRYTOYR G.Improving operating window for disconnect operations of CWO risers[R].OMAE 2010-20976,2010.
[65] GUTTORM G,PARTHA S,SRINIVAS V.Marine drilling riser disconnect and recoil analysis[R].AADE-11-NTCE-80,2011.
[66] BENJAMIN I B.Disconnection of workover risers on very deep water[D].Norway:Norwegian University of Science and Technology,2012.
[67] PETER M,JOHE P,AMAR V,et al.Ensuring safe riser emergency disconnect in harsh environments:experience and design requirements[R].ISOPE-I-13-299,2013.
[68] ARILD G.Simulation of drilling riser disconnection-recoil analysis[D].Norway:Norwegian University of Science and Technology,2013.
[69] RAFAEL G P,FRANCISCO E R,RICARDO F,et al.Marine riser emergency disconnection analysis using scalar elements for tensioner modelling[J].Applied Ocean Research,2016 (59):83-92.
[70] 张磊,畅元江,刘秀全,等.深水钻井隔水管与防喷器紧急脱离后的反冲响应分析[J].石油钻探技术,2013,41(3):25-30.
ZHANG Lei,CHANG Yuanjiang,LIU Xiuquan,et al.Recoil analysis for deepwater drilling riser after emergency disconnection with blowout preventer[J].Petroleum Drilling Techniques,2013,41(3):25-30.
[71] 张磊.深水钻井隔水管反冲控制技术研究[D].东营:中国石油大学(华东),2014.
ZHANG Lei.Recoil analysis for deepwater drilling riser system[D].Dongying:China University of Petroleum,2014.
[72] 王腾,王科.紧急解脱隔水管回弹响应分析[J].中国海上油气,2018,30(2):120-125.
WANG Teng,WANG Ke.Analysis of resilient response of emergently disentangled drilling risers[J].China Offshore Oil and Gas,2018,30(2):120-125.
[73] LI Chaowei,FAN Honghai,WANG Zhiming,et al.Numerical simulation of mud discharge after drilling riser emergency disconnection[R].ISOPE-I-15-736,2015.
[74] LI Chaowei,FAN Honghai,WANG Zhiming,et al.Two methods for simulating mud discharge after emergency disconnection of a drilling riser[J].Journal of Natural Gas Science and Engineering,2016,28:142-152.
[75] MENG Shuai,CHE Chidong,ZHANG Weijing.Discharging flow effect on the recoil response of a deep-water drilling riser after an emergency disconnect[J].Ocean Engineering,2018,151:199-205.
[76] HOCK C J,YOUNG R D.A deepwater riser emergency disconnect antirecoil system[J].Journal of Petroleum Technology,1993,45(8):744-751.
[77] STAHL M J,HOCK C J.Design of a riser recoil control system and validation through full-scale testing[R].SPE 62959,2000.
[78] 田秀娟.深水钻井隔水管张紧系统反冲控制研究[D].东营:中国石油大学(华东),2013.
TIAN Xiujuan.Research on recoil control of deepwater drilling riser tensioning system[D].Dongying:China University of Petroleum,2013.
[79] 张方芬.深水钻井隔水管装置防反冲控制对策及应用研究[D].东营:中国石油大学(华东),2015.
ZHANG Fangfen.The countermeasure and application research of anti-recoil control about deepwater drilling riser device[D].Dongying:China University of Petroleum,2015.
[80] AMBROSE B D,GREALISH F,WHOOLEY K.Soft hangoff method for drilling risers in ultra deepwater[R].OTC 13186,2001.
[81] AMBROSE B D,CHILDS M S,LEPPARD S A,et al.Application of a deepwater riser risk analysis to drilling operations and riser design[R].OTC 12954,2001.
[82] BREKKE J N,SOLES J,WISHAHY M A,et al.Drilling riser management for a DP drillship in large,rapidly-developing seastates in deepwater[R].SPE 87123,2004.
[83] 孙友义,陈国明,畅元江,等.超深水隔水管悬挂动力分析与避台风策略探讨[J].中国海洋平台,2009,24(2):29-32.
SUN Youyi,CHEN Guoming,CHANG Yuanjiang,et al.Hang-off dynamic analysis and the discuss of typhoon-avoidance strategy for ultra-deepwater drilling riser[J].China Offshore Platform,2009,24(2):29-32.
[84] 张炜,高德利.深水钻井隔水管脱开模式下纵向动态行为研究[J].石油钻探技术,2010,38(4):7-9.
ZHANG Wei,GAO Deli.Research on the dynamic behavior of riser in deepwater drilling under the condition of disconnection Mode[J].Petroleum Drilling Techniques,2010,38(4):7-9.
[85] 陈国明,刘秀全,畅元江,等.深水钻井隔水管与井口技术研究进展[J].中国石油大学学报:自然科学版,2013,37(5):129-139.
CHEN Guoming,LIU Xiuquan,CHANG Yuanjiang,et al.Advances in technology of deepwater drilling riser and wellhead[J].Journal of China University of Petroleum:Edition of Natural Science,2013,37(5):129-139.
[86] 鞠少栋,畅元江,陈国明,等.深水钻井隔水管悬挂窗口确定方法[J].石油学报,2012,33(1):133-136.
JU Shaodong,CHANG Yuanjiang,CHEN Guoming,et al.Determination of the hang-off window for deepwater drilling riser[J].Acta Petrolei Sinica,2012,33(1):133-136.
[87] WANG Y B,GAO D L,FANG J.Optimization analysis of the riser top tension force in deepwater drilling:aiming at the minimum variance of lower flexible joint deflection angle[J].Journal of Petroleum Science and Engineering,2016,146:149-157.
[88] American Petroleum Institute.API RP 90:Annular casing pressure management for offshore wells[S].Washington D.C:American Petroleum Institute,2006.
[89] NORSOK STANDARD.Well integrity in drilling and well operations[S].Norway,D-010,2013.
[90] RAMEY J H JR.Wellbore heat transmission[J].Journal of Petroleum Technology,1962,14(4):427-435.
[91] 赵金洲,任书泉.井筒内液体温度分布规律的数值计算[J].石油钻采工艺,1986(3):49-57.
ZHAO Jinzhou,REN Shuquan.Numerical calculation of liquid temperature distribution in wellbore[J].Oil Drilling & Production Technology,1986(3):49-57.
[92] AASEN J A,AADNOY B S.Multistring analysis of wellhead movement[J].Journal of Petroluem Science and Engineering,2009,66(3/4):111-116.
[93] 唐海雄,张俊斌,王堂青,等.海上高温油井的井筒温度剖面预测[J].大庆石油学院学报,2010,34(3):96-100.
TANG Haixiong,ZHANG Junbin,WANG Tangqing,et al.Prediction of wellbore temperature profile in offshore HT oil wells[J].Journal of Daqing Petroleum Institute,2010,34(3):96-100.
[94] 钱锋.深水套管柱载荷分析与设计方法研究[D].北京:中国石油大学(北京),2012.
QIAN Feng.Load analysis and strength design of casing in deepwater wells[D].Beijing:China University of Petroleum,2012.
[95] 畅元江,王健,李家仪,等.考虑温度影响的水下井口疲劳损伤计算方法[J].石油学报,2019,40(4):482-492.
CHANG Yuanjiang,WANU Jian,LlJiayi,et al.Calculation method of subsea wellhead fatigue damage considering thermal effect[J].Acta Petrolei Sinica,2019,40(4):482-492.
[96] 刘劲歌.深水油气井开采期间环空压力预测及释放机理研究[D].北京:中国石油大学(北京),2017.
LIU Jin'ge.Research on the annular pressure buildup and mitigation mechanism in deepwater wells[D].Beijing:China University of Petroleum,2017.
[97] HALAL A S,MITCHELL R F.Casing design for trapped annular pressure buildup[J].SPE Drilling & Completion, 1994,9(2):107-114.
[98] OUDEMAN P,KEREM M.Transient behavior of annular pressure build-up in HP/HT wells[J].SPE Drilling & Completion,2006,21(4):234-241.
[99] 邓元洲,陈平,张慧丽.迭代法计算油气井密闭环空压力[J].海洋石油,2006,26(2):93-96.
DENG Yuanzhou,CHEN Ping,ZHANG Huili.Calculating the pressure in sealed annulus in oil well by iterative method[J].Offshore Oil,2006,26(2):93-96.
[100] 杨进,唐海雄,刘正礼,等.深水油气井套管环空压力预测模型[J].石油勘探与开发,2013,40(5):616-619.
YANG Jin,TANG Haixiong,LIU Zhengli,et al.Prediction model of casing annulus pressure for deepwater well drilling and completion operation[J].Petroleum Exploration and Development,2013,40(5):616-619.
[101] 于晓聪,杨进,阚长宾,等.深水井筒环空圈闭压力单向控制机理[J].石油学报,2018,39(3):335-340.
YU Xiaocong,YANG Jin,KAN Changbin,et al.Unidirectional control mechanism of annulus trapped pressure in deepwater shaft[J].Acta Petrolei Sinica,2018,39(3):335-340.
[102] 张波,管志川,胜亚楠,等.深水油气井井筒内流体特性对密闭环空压力的影响[J].石油勘探与开发,2016,43(5):799-805.
ZHANG Bo,GUAN Zhichuan,SHENG Yanan,et al.Impact of wellbore fluid properties on trapped annular pressure in deepwater wells[J].Petroleum Exploration and Development,2016,43(5):799-805.
[103] BYROM T G.Casing and liners for drilling and completion-design[M].Houston:Gulf Publishing Company,2007.
[104] BERNT S A.Modern well design[M].Houston:Gulf Publishing Company,1996.
[105] DEVEREUX S.Practical well planning and drilling manual[M].Tulsa:PennWell,1998.
[106] ADAMS A J,MACEACHRAN A.Impact on casing design of thermal expansion of fluids in confined annuli[J].SPE Drilling & Completion,1994,9(3):210-216.
[107] SAMUEL G R,GONZALES A.Optimization of multistring casing design with wellhead growth[R].SPE 56762,1999.
[108] 谢华,张伟国,刘秀全,等.海上油气井采油树升高机理及其计算方法[J].天然气工业,2013,33(4):80-84.
XIE Hua,ZHANG Weiguo,LIU Xiuquan,et al.Mechanism of christmas tree rise in offshore oil & gas wells and the related calculation method[J].Natural Gas Industry,2013,33(4):80-84.
[109] 王宴滨,高德利,房军.深水钻井测试与生产过程井口抬升计算[J].石油矿场机械,2015,44(10):61-63.
WANG Yanbin,GAO Deli,FANG Jun.Analysis of wellhead growth of deepwater well during production and well testing[J].Oil Field Equipment,2015,44(10):61-63.
[110] 龚宁,李进,陈毅,等.海上油田生产井口抬升原因分析及对策研究[J].石油机械,2017,45(6):51-55.
GONG Ning,LI Jin,CHEN Yi,et al.Cause analysis and strategy research on wellhead rising of offshore production well[J].China Petroleum Machinery,2017,45(6):51-55.
[111] 张智,王汉.考虑环空热膨胀压力分析高温高压气井井口抬升[J].工程热物理学报,2017,38(2):267-276.
ZHANG Zhi,WANG Han.Analysis of wellhead growth considering the annulus thermal expansion pressure in HPHT gas wells[J].Journal of Engineering Thermophysics,2017,38(2):267-276.
[112] ZENG Jing,GAO Deli,WANG Yangbin,et al.Evaluation method for cement sheath sealing failure under sustained casing pressure[J].Chemistry and Technology of Fuels and Oils,2019,55(1):93-104.
[113] ZENG J,GAO D L,WANG Y B,et al.Research on the effect of casing deformation on sustained casing pressure[R].ARMA-2018-304,2018.
[114] ZENG J,GAO D L,WANG Y B,et al.Effect of the thermal stress and non-uniform geologic stress on the sealing failure of cement sheath in shale gas wells[R].ISRM-ARMS10-2018-153,2018.
[115] 曾静,高德利,王宴滨,等.环空体积膨胀条件下的高压气井环空压力预测方法[J].断块油气田,2019,26(1):101-106.
ZENG Jin,GAO Deli,WANG Yanbin,et al.Prediction of sustained casing pressure in high-pressure gas wells under annular volume expansion[J].Fault-Block Oil and Gas Field,2019,26(1):101-106.
[116] 刘清友,毛良杰,周守为,等.基于光纤光栅测试技术的隔水管力学行为实验研究[J].海洋工程装备与技术,2015,2(6):373-383.
LIU Qingyou,MAO Liangjie,ZHOU Shouwei,et al.Experimental study of the drilling riser mechanical behavior based on fiber Bragg grating measuring and testing technique[J].Ocean Engineering Equipment and Technology,2015,2(6):373-383.
[117] 刘清友,毛良杰,付强,等.剪切流作用下隔水管张力响应机理试验研究[J].中国海上油气,2015,27(5):82-87.
LIU Qingyou,MAO Liangjie,FU Qiang,et al.Experimental study on the mechanism of the vortex-induced vibration of the drilling riser under shear flow[J].China Offshore Oil and Gas,2015,27(5):82-87.

海洋深水钻井力学与控制技术若干研究进展

Some research progress in deepwater drilling mechanics and control technology

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	高德利, 刘奎, 王宴滨, 刘金海, 李轩. 页岩气井井筒完整性失效力学机理与设计控制技术若干研究进展[J]. 石油学报, 2022, 43(12): 1798-1812.
[2]	张明贺, 杨进, 刘和兴, 李磊, 傅超, 杨宇翔, 徐东升, 马阔. 膨胀式导管提高深水钻井水下井口承载力的机理[J]. 石油学报, 2021, 42(6): 791-800.
[3]	王宴滨, 高德利. 基于多自由度系统的深水钻井隔水管紧急解脱反冲响应[J]. 石油学报, 2020, 41(10): 1259-1265.
[4]	陈国明, 李家仪, 畅元江, 王康, 修梓翔, 刘浩林, 许亮斌, 盛磊祥. 深水油气水下井口系统疲劳损伤影响因素[J]. 石油学报, 2019, 40(S2): 141-151.
[5]	畅元江, 王健, 李家仪, 聂振宇, 张伟国, 许亮斌, 刘秀全, 陈国明. 考虑温度影响的水下井口疲劳损伤计算方法[J]. 石油学报, 2019, 40(4): 482-492.
[6]	徐加放, 丁廷稷, 张瑞, 张振越, 顾甜甜, 程远方, 王志远. 水基钻井液低温流变性调控用温敏聚合物研制及性能评价[J]. 石油学报, 2018, 39(5): 597-603.
[7]	李子丰, 王长进, 田伟超, 谢健. 钻柱力学三原理及定性模拟实验[J]. 石油学报, 2017, 38(2): 227-233.
[8]	刘秀全, 陈国明, 畅元江, 姬景奇, 傅景杰, 张浩. 内孤立波作用下深水锚泊平台-隔水管耦合系统动力学特性[J]. 石油学报, 2017, 38(12): 1448-1456.
[9]	赵欣, 邱正松, 黄维安, 周国伟, 张永君. 天然气水合物热力学抑制剂作用机制及优化设计[J]. 石油学报, 2015, 36(6): 760-766.
[10]	许玉强, 管志川, 许传斌, 张洪宁, 张会增. 深水钻井井筒中天然气水合物生成风险评价方法[J]. 石油学报, 2015, 36(5): 633-640.
[11]	陈平, 马天寿. 深水钻井溢流早期监测技术研究现状[J]. 石油学报, 2014, 35(3): 602-612.
[12]	畅元江, 杨焕丽, 刘秀全, 刘康. 深水钻井隔水管-井口系统涡激疲劳详细分析[J]. 石油学报, 2014, 35(1): 146-151.
[13]	刘秀全, 陈国明, 畅元江, 许亮斌. 深水钻井隔水管-导管系统波激疲劳分析[J]. 石油学报, 2013, 34(5): 977-982.
[14]	鞠少栋　畅元江　陈国明　陈黎明　许亮斌. 深水钻井隔水管悬挂窗口确定方法[J]. 石油学报, 2012, 33(1): 133-136.
[15]	孙友义鞠少栋蒋世全陈国明. 超深水钻井隔水管-井口系统涡激振动疲劳分析[J]. 石油学报, 2011, 32(6): 1050-1054.