非黏结柔性立管轴对称载荷作用下的结构响应和数值分析

doi:10.7623/syxb201504012

石油学报 ›› 2015, Vol. 36 ›› Issue (4): 504-510,515.DOI: 10.7623/syxb201504012

非黏结柔性立管轴对称载荷作用下的结构响应和数值分析

郭有松¹, 陈希恰², 王德禹¹, 付世晓¹

1. 上海交通大学海洋工程国家重点实验室上海 200240;
2. 中海石油(中国)有限公司天津分公司渤海石油研究院天津 300452

收稿日期:2014-09-21 修回日期:2015-01-15 出版日期:2015-04-25 发布日期:2015-04-04
通讯作者: 王德禹,男,1963年12月生,1982年获太原工学院学士学位,1992年获太原工业大学博士学位,现为上海交通大学教授、博士生导师,主要从事船舶与海洋工程结构物强度、疲劳分析研究工作。Email:dywang@sjtu.edu.cn
作者简介:郭有松,男,1974年12月生,1998年获大连水产学院船舶工程专业学士学位,现为上海交通大学博士研究生,主要从事海洋工程结构物强度与疲劳分析研究工作。Email:guoyousong@sjtu.edu.cn
基金资助:
国家自然科学基金项目(No.51279101,No.51239007)资助。

Analytical and numerical investigation on the structural response of flexible risers under axisymmetric load

Guo Yousong¹, Chen Xiqia², Wang Deyu¹, Fu Shixiao¹

1. State Key Laboratory of Ocean Engineering, Shanghai Jiao Tong University, Shanghai 200240, China;
2. Bohai Oilfield Research Institute, Tianjin Branch, CNOOC China Limited, Tianjin 300452, China

Received:2014-09-21 Revised:2015-01-15 Online:2015-04-25 Published:2015-04-04

摘要/Abstract

摘要：

轴对称载荷是柔性立管的主要受载形式,由于结构组成的复杂性,柔性立管在轴对称载荷作用下的结构响应往往难以确定。基于静力平衡、变形协调以及本构关系,推导出了能够准确预报柔性立管轴对称响应的理论模型,该模型考虑了立管层间接触压力和层间间隙相互排斥的关系,因而可以分析载荷施加方向对结构响应的影响;同时,为了更真实模拟柔性立管的力学特性,在ABAQUS软件中建立了具有详细截面形式的柔性立管数值模型;基于建立的理论模型和数值模型,分析了柔性立管在拉伸、扭转以及内、外压作用下的结构响应,并将计算结果与实验结果进行了对比分析。研究表明,提出的理论模型和数值模型能够准确预报柔性立管在轴对称载荷作用下的力学特性,可为工程设计提供参考依据。

关键词: 柔性立管, 轴对称响应, 理论模型, 数值模型, 层间间隙, 实验对比

Abstract:

Based on equilibrium conditions, geometrical relations and constitutive equations, the analytical model is deduced in this paper to predict the axisymmetric behavior of the flexible riser. This model takes the mutual exclusion relationship between the contact pressure and interlayer gap into consideration, hence, the influence of the force direction on the structure behavior can be analyzed. Meanwhile, the detailed finite element model of the flexible riser is established in software ABAQUS. Based on the analytical model and the numerical model, the structural response of a typical flexible riser under axisymmetric load is studied. The calculated results are compared with the experimental data obtained from literature and a good agreement is found. Studies show that the proposed analytical and numerical models can provide an approach to analyzing and designing flexible risers.

Key words: flexible riser, axisymmetric response, analytical model, numerical model, gap between layers, comparison with the experimental data

中图分类号:

TE53

郭有松, 陈希恰, 王德禹, 付世晓. 非黏结柔性立管轴对称载荷作用下的结构响应和数值分析[J]. 石油学报, 2015, 36(4): 504-510,515.

Guo Yousong, Chen Xiqia, Wang Deyu, Fu Shixiao. Analytical and numerical investigation on the structural response of flexible risers under axisymmetric load[J]. Acta Petrolei Sinica, 2015, 36(4): 504-510,515.

参考文献

[1] 黄维和.大型天然气管网系统可靠性[J].石油学报, 2013,34(2):401-404.
Huang Weihe.Reliability of large-scale natural gas pipeline network[J].Acta Petrolei Sinica,2013,34(2):401-404.
[2] 张圣柱,吴宗之.基于风险的长输油气管道选线优化方法[J].石油学报,2014,35(3):570-576.
Zhang Shengzhu,Wu Zongzhi.Risk-based optimization method for long-distance oil and gas transmission pipeline route[J].Acta Petrolei Sinica,2014,35(3):570-576.
[3] 黄维平,白兴兰,李华军.国外深水钢悬链线立管研究发展现状[J].中国海洋大学学报,2009,39(2):290-294.
Huang Weiping,Bai Xinglan,Li Huajun.State of the art of research and development of overseas deepwater steel catenary risers[J].Periodical of Ocean University of China,2009,39(2):290-294.
[4] 谢彬,段梦兰,秦太验,等.海洋深水立管的疲劳断裂与可靠性评估研究进展[J].石油学报,2004,25(3):95-100.
Xie Bin,Duan Menglan,Qing Taiyan,et al.Advance of research on fatigue fracture and reliability assessment of deepwater risers[J].Acta Petrolei Sinica,2004,25(3):95-100.
[5] 宋磊建.缓波形柔性立管总体响应特性研究及疲劳分析[D].上海:上海交通大学,2013.
Song Leijian.The overall response characteristics research and fatigue analysis of the lazy-wave flexible riser[D].Shanghai:Shanghai Jiao Tong University,2013.
[6] Witz J A,Tan Z.On the axial-torsional structural behaviour of flexible pipes,umbilicals and marine cables[J].Marine Structures,1992,5(2/3):205-227.
[7] Ramos Jr.R,Pesce C P.A consistent analytical model to predict the structural behavior of flexible risers subjected to combined loads[J].Journal of Offshore Mechanics and Arctic Engineering,2004,126(2):141-146.
[8] Yue Qianjin,Lu Qingzhen,Yan Jun,et al.Tension behavior prediction of flexible pipelines in shallow water[J].Ocean Engineering,2013,58:201-207. (上接第510页)
[9] 董磊磊,张崎,黄一.基于能量法的非黏合柔性立管轴对称响应分析[J].华中科技大学学报:自然科学版,2013,41(5):122-126.
Dong Leilei,Zhang Qi,Huang Yi.Energy approaches based axisymmetric analysis of unbonded flexible risers[J].Journal of Huazhong University of Science & Technology:Natural Science Edition,2013,41(5):122-126.
[10] Zhang W,Tuohy J.Application of finite element modelling in the qualification of large diameter unbonded flexible risers[C]//Proceedings of the 21st International Conference on Offshore Mechanics and Arctic Engineering.Oslo,2002:425-433.
[11] Bahtui A,Bahai H,Alfano G.A finite element analysis for unbonded flexible risers under axial tension[C]//Proceedings of the 27th International Conference on Offshore Mechanics and Arctic Engineering.Estoril,2008:529-534.
[12] Bahtui A,Bahai H,Alfano G.A finite element analysis for unbonded flexible risers under torsion[J].Journal of Offshore Mechanics and Arctic Engineering,2008,130(4):041301.
[13] Claydon P,Cook G,Brown P A,et al.A theoretical approach to prediction of service life of unbonded flexible risers under dynamic loading conditions[J].Marine Structures,1992,5(5):399-429.
[14] McNamara JF,Harte AM.Three-dimensional analytical simulation of flexible pipe wall structure[C]//Proceedings of the 8th International Conference on Offshore Mechanics and Arctic Engineering,1989:477-482.
[15] Lanteigne J.Theoretical estimation of the response of helically armored cables to tension,torsion,and bending[J].Journal of Applied Mechanics,1985,52(2):423-432.
[16] 姜豪,杨和振,刘昊.深海非粘结柔性立管简化模型数值分析及实验研究[J].中国舰船研究,2013,8(1):64-72.
Jiang Hao,Yang Hezhen,Liu Hao.Experimental and numerical analysis of a new simplified model for the deepwater unbonded flexible risers[J].Chinese Journal of Ship Research,2013,8(1):64-72.
[17] Witz J A.A case study in the cross-section analysis of flexible risers[J].Marine Structures,1996,9(9):885-904.
[18] Saevik S,Berge S.Fatigue testing and theoretical studies of two4 in flexible pipes[J].Engineering Structures, 1995,17(4):276-292.

非黏结柔性立管轴对称载荷作用下的结构响应和数值分析

Analytical and numerical investigation on the structural response of flexible risers under axisymmetric load

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 11

编辑推荐

Metrics

本文评价

[1]	汤明, 郭欣钰, 谢玉森, 赵晨敏, 敬亚东, 何世明. 幂律流体在椭圆井眼同心环空中螺旋层流流动压降[J]. 石油学报, 2024, 45(3): 586-594.
[2]	唐雪平, 洪迪峰, 高文凯, 彭烈新, 杨宝斌. 七段制恒工具面角三维水平井轨道设计方法[J]. 石油学报, 2022, 43(9): 1315-1324.
[3]	郭玲玲, 刘涛, 刘影, 郎成山, 胡绍彬. 蒸汽驱中—后期间歇注热理论模型与现场试验[J]. 石油学报, 2019, 40(7): 823-829.
[4]	白　勇　余彬彬　程　鹏. 内衬管修复旧管道安装拉力理论分析与数值模拟[J]. 石油学报, 2012, 33(4): 716-722.
[5]	熊兆洪　李振林　宫　敬　李　克. 埋地管道小泄漏模型及数值求解[J]. 石油学报, 2012, 33(3): 493-498.
[6]	汪志明, 薛亮. 射流式井底增压器水力参数理论模型研究[J]. 石油学报, 2008, 29(2): 308-312.
[7]	石广仁. 蒙皂石向伊利石转化的溶解沉淀模型[J]. 石油学报, 2006, 27(6): 47-50.
[8]	田红, 邓金根, 孟艳山, 曾祥林, 孙福街. 渤海稠油油藏出砂规律室内模拟实验研究[J]. 石油学报, 2005, 26(4): 85-87,92.
[9]	范军, 陈光, 杲长良, 韩来聚. 欠平衡钻井理论模型及应用[J]. 石油学报, 2000, 21(4): 75-79.
[10]	赵永胜, 董富林, 邵进忠, 李士奎. 储层流体流动单元的矿场试验[J]. 石油学报, 1999, 20(6): 43-46.
[11]	刘尚奇. 水平井热采油藏数值模型[J]. 石油学报, 1995, 16(2): 63-70.