[1] 沃兹德维任斯基.钻井力学[M].杨惠民,译.北京:石油工业出版社,1958:1-486.
Vozdvizhenski B H.Drilling mechanics[M].Yang Huimin,trans.Beijing:Petroleum Industry Press,1958:1-486.
[2] Lubinski A.Developments in petroleum engineering (Volume I)[M].Houston,Texas:Gulf Publishing Co.,1987.
[3] Lubinski A.Developments in petroleum engineering (Volume II)[M].Houston,Texas:Gulf Publishing Co.,1988.
[4] 鲁宾斯基A.钻井工程进展(第一册)[M].黎孔昭,严世才,朱千里,等译.北京:石油工业出版社,1994:1-297.
Lubinski A.Developments in petroleum engineering (Volume I)[M].Li Kongzhao,Yan Shicai,Zhu Qianli,et al,trans.Beijing:Petroleum Industry Press,1994:1-297.
[5] 鲁宾斯基A.钻井工程进展(第二册)[M].鲍有光,梅江,译.北京:石油工业出版社,1993:1-238.
Lubinski A.Developments in petroleum engineering (Volume II)[M].Bao Youguang,Mei Jiang,trans.Beijing:Petroleum Industry Press,1993:1-238.
[6] 赵国珍,龚伟安.钻井力学基础[M].北京:石油工业出版社,1988:1-372.
Zhao Guozhen,Gong Wei'an.Foundation of drilling mechanics[M].Beijing:Petroleum Industry Press,1988:1-372.
[7] 白家祉,苏义脑.井斜控制理论与实践[M].北京:石油工业出版社,1990:1-401.
Bai Jiazhi,Su Yinao.Deviation control theory and practice[M].Beijing:Petroleum Industry Press,1990:1-401.
[8] 苏义脑.水平井井眼轨道控制[M].北京:石油工业出版社,2000:1-250.
Su Yinao.Horizontal well trajectory control[M].Beijing:Petroleum Industry Press,2000:1-250.
[9] 苏义脑.油气直井防斜打快技术——理论与实践[M].北京:石油工业出版社,2003:1-87.
Su Yinao.Deviation control and fast drilling technology of oil-gas vertical wells:theory and practice[M].Beijing:Petroleum Industry Press,2003:1-87.
[10] 高德利,刘希圣,徐秉业.井眼轨迹控制[M].东营:石油大学出版社,1994:1-259.
Gao Deli,Liu Xisheng,Xu Bingye.Prediction and control of wellbore trajectory[M].Dongying:China University of Petroleum Press,1994:1-259.
[11] 高德利.油气钻井工程力学进展-刘希圣教授70寿辰暨执教45周年纪念文集[M].东营:石油大学出版社,1996:1-226.
Gao Deli.Advances in oil-gas wells drilling engineering mechanics-Professor Liu Xisheng 70 birthday cum coached 45 anniversary anthology[M].Dongying:China University of Petroleum Press,1996:1-226.
[12] 高德利.油气井管柱力学与工程[M].东营:中国石油大学出版社,2006:1-316.
Gao Deli.Down-hole tubular mechanics and its applications[M].Dongying:China University of Petroleum Press,2006:1-316.
[13] 李子丰.油气井杆管柱力学[M].北京:石油工业出版社,1996:1-145.
Li Zifeng.Tubular mechanics in oil-gas wells[M].Beijing:Petroleum Industry Press,1996:1-145.
[14] 李子丰.油气井杆管柱力学及应用[M].北京:石油工业出版社,2008:1-224.
Li Zifeng.Tubular mechanics in oil-gas wells and its applications[M].Beijing:Petroleum Industry Press,2008:1-224.
[15] 李鹤林.石油管工程[M].北京:石油工业出版社,1999:1-125.
Li Helin.Oil pipe engineering[M].Beijing:Petroleum Industry Press,1999:1-125.
[16] 李鹤林,李平全,冯耀荣.石油钻柱失效分析及预防[M].北京:石油工业出版社,1999:1-297.
Li Helin,Li Pingquan,Feng Yaorong.Failure analysis and precaution of petroluem drill string[M].Beijing:Petroluem Industry Press,1999:1-297.
[17] 董世民.抽油机井动态参数计算机仿真与系统优化[M].北京:石油工业出版社,2003:1-156.
Dong Shimin.Computer simulation of dyanmic parameters of rodpumping system and system optimization[M].Beijing:Petroleum Industry Press,2003:1-156.
[18] 姜伟.海洋石油钻井工程力学研究与实践[M].北京:石油工业出版社,2008:1-214.
Jiang Wei.Study and practice in engineering mechanics of offshore petroleum drillilng[M].Beijing:Petroleum Industry Press,2008:1-214.
[19] 刘清友,孟庆华,庞东晓.钻井系统动力学仿真研究及应用[M].北京:科学出版社,2009:1-202.
Liu Qingyou,Meng Qinghua,Pang Dongxiao.Drilling system dynamics simulation and application[M].Beijing:Science Press,2009:1-202.
[20] 刘清友,何玉发.深井注入管柱力学行为及应用[M].北京:科学出版社,2013:1-179.
Liu Qingyou,He Yufa.Deep well injection tubular mechanical behavior and application[M].Beijing:Science Press,2013:1-179.
[21] 韩志勇.液压环境下的油井管柱力学[M].北京:石油工业出版社,2011:1-308.
Han Zhiyong.Tubular mechanics in oil wells under hydraulic environment[M].Beijing:Petroleum Industry Press,2011:1-308.
[22] 刘巨保,岳欠杯.石油钻采管柱力学[M].北京:石油工业出版社,2011:1-279.
Liu Jubao,Yue Qianbei.Oil drilling & production pipe string mechanics[M].Beijing:Petroleum Industry Press,2011:1-279.
[23] 刘巨保.石油钻采管柱力学[M].哈尔滨:黑龙江大学出版社,2012:1-433.
Liu Jubao.Oil drilling & production pipe string mechanics[M].Harbin:Heilongjiang University Press,2012:1-433.
[24] Gibbs S G.Rod pumping:modern methods of design,diagnosis and surveillance[M].La Habra,Califoria:Theta Oilfield Services,Inc.,2012:1-660.
[25] 郝俊芳,龚伟安.套管强度计算与设计[M].北京:石油工业出版社,1987:1-264.
Hao Junfang,Gong Wei'an.Casing strength compuation and design[M].Beijing:Petroleum Industry Press,1987:1-264.
[26] 于永南.钻柱力学分析的有限单元法[M].北京:石油大学出版社,1998:1-132.
Yu Yongnan.Finite element method for drill string mechanical analysis[M].Beijing:China University of Petroleum Press,1998:1-132.
[27] 章扬烈.钻柱运动学与动力学[M].北京:石油工业出版社,2001:1-121.
Zhang Yanglie.Drillstring kinematics and dynamics[M].Beijing:Petroleum Industry Press,2001:1-121.
[28] 李志明,殷有泉.油水井套管外挤力计算及其力学基础[M].北京:石油工业出版社,2006:1-153.
Li Zhiming,Yin Youquan.Oil and water well casing external pressure computation and its mechanics foundation[M].Beijing:Petoleum Industry Press,2006:1-153.
[29] 练章华.地应力与套管损害机理[M].北京:石油工业出版社,2009:1-197.
Lian Zhanghua.In-situ stress and casing damage mechanism[M].Beijing:Petroleum Industry Press,2009:1-197.
[30] Samuel G R.Formulas and calculations for drilling operations[M].Hoboken:Scrivener,2010:205-252.
[31] 吕苗荣.石油工程管柱力学[M].北京:中国石化出版社,2012:1-181.
Lü Miaorong.Tubular mechanics in petroleum engineering[M].Beijing:China Petrochemical Press,2012:1-181.
[32] 黄桢,李鹭光,胡桂川.天然气井油管柱疲劳寿命预测[M].重庆:重庆大学出版社,2012:1-246.
Huang Zhen,Li Luguang,Hu Guichuan.Gas well tubing string fatigue life prediction[M].Chongqing:Chongqing University Press,2012:1-246.
[33] 徐秉业.弹性与塑性力学-例题和习题[M].北京:机械工业出版社,1981:1-632.
Xu Bingye.Elastic-plastic mechanics-examples and exercises[M].Beijing:China Machine Press,1981:1-632.
[34] 狄勤丰.旋转导向井下闭环钻井技术[M].西安:陕西科学技术出版社,1999.
Di Qinfeng.Rotary closed-loop drilling technology[M].Xi'an:Shannxi Science and Technology Press,1999.
[35] 李子丰,梁尔国.钻柱力学研究现状及进展[J].石油钻采工艺,2008,30(2):1-9.
Li Zifeng,Liang Erguo.Research and development of drill string mechanics[J].Oil Drilling & Production Technology, 2008,30(2):1-9.
[36] 李子丰,蔡雨田,李冬梅,等.地层测试管柱力学分析[J].石油学报,2011,32(4):709-716.
Li Zifeng,Cai Yutian,Li Dongmei,et al.Mechanical analysis of pipe string in formation testing[J].Acta Petrolei Sinica,2011,32(4):709-716.
[37] 李子丰.油气井杆管柱的稳定性与纵横弯曲[J].西部探矿工程,1997,9(2):23-25.
Li Zifeng.Stability and criss cross curving of pipe pile of oil gas well[J].West-China Exploration Engineering, 1997,9(2):23-25.
[38] 高德利,刘希圣,徐秉业.钻柱力学研究的若干基本问题[C]//中国石油工程学会钻井基础理论研讨会.大庆:中国石油工程学会,1992.
Gao Deli,Liu Xisheng,Xu Bingye.Some essential questions of drill string mechanics research[C]//Chinese Society of Petroleum Engineering Drilling Theoretical Seminar.Daqing:Chinese Society of Petroleum Engineering,1992.
[39] 李子丰,马兴瑞,黄文虎.油气井杆管柱动力学基本方程[J].力学与实践,1995,17(1):40-42.
Li Zifeng,Ma Xingrui,Huang Wenhu.Fundamental equations for dynamical analysis to the pipe in an oil and gas well[J].Mechanics in Engineering,1995,17(1):40-42.
[40] 李子丰,马兴瑞,黄文虎.钻柱力学基本方程及其应用[J].力学学报,1995,27(4):406-414.
Li Zifeng,Ma Xingrui,Huang Wenhu.A general formulation of drill stem mechanics and its applications[J].Acta Mechanica Sinica,1995,27(4):406-414.
[41] 李子丰,李敬元,马兴瑞,等.油气井杆管柱动力学基本方程及应用[J].石油学报,1999,20(3):87-90.
Li Zifeng,Li Jingyuan,Ma Xingrui,et al.Fundamental equations and its applications for dynamical analysis of rod and pipe string in oil and gas wells[J].Acta Petrolei Sinica,1999,20(3):87-90.
[42] Li Zifeng,Li Jingyuan.Fundamental equations for dynamic analysis of rod and pipe string in oil-gas wells and application in static buckling analysis[J].Journal of Canadian Petroleum Technology,2002,41(5):44-53.
[43] Lubinski A.A Study of the buckling of rotary drilling strings[R].New York:American Petroleum Institute,1950:178-214.
[44] Paslay P R,Bogy D B.The stability of a circular rod laterally constrained to be in contact with an inclined circular cylinder[J].Journal of Applied Mechanics,1964,31(4):605-610.
[45] Dawson R.Drill pipe buckling in inclined holes[J].Journal of Petroleum Technology,1984,36(10):1734-1738.
[46] Mitchell R F.Buckling behavior of well tubing:the packer effect[J]. Society of Petroleum Engineers Journal,1982,22(5):616-624.
[47] Mitchell R F.New concepts for helical buckling[J].SPE Drilling Engineering,1988,3(3):303-310.
[48] Mitchell R F.Simple frictional analysis of helical buckling of tubing[J].SPE Drilling Engineering,1986,1(6):457-465.
[49] Chen Yuche,Lin Y H,Cheatham J B.Tubing and casing buckling in horizontal wells (includes associated papers 21257 and 21308)[J].Journal of Petroleum Technology,1990,42(2):140-191.
[50] 李子丰,马兴瑞,黄文虎.水平管中受压扭细长圆杆(管)的线性弯曲[J].哈尔滨工业大学学报,1994,26(1):96-100.
Li Zifeng,Ma Xingrui,Huang Wenhu.The buckling of a circular rod or pipe laterally constrained to be contact with a horizontal circular cylinder[J].Journal of Harbin Institute of Technology,1994,26(1):96-100.
[51] 李子丰,马兴瑞,黄文虎.水平管中受压扭细长圆杆(管)的几何非线性弯曲[J].力学与实践,1994,16(3):16-18.
Li Zifeng,Ma Xingrui,Huang Wenhu.Geometrically nonlinear bending of slender bar (tube) under compression torsion loading in a horizontal pipe[J].Mechanics in Engineering,1994,16(3):16-18.
[52] 李子丰,马兴瑞,黄文虎.油气井杆管柱的静力稳定性[J].工程力学,1997,14(1):17-25.
Li Zifeng,Ma Xingrui,Huang Wenhu.Static stability of pipe string in oil and gas wells[J]. Engineering Mechanics,1997,14(1):17-25.
[53] Li Zifeng.Static buckling of rod and pipe string in oil and gas wells[R].SPE 57013,1999.
[54] Gao Deli,Liu Fengwu.The post-buckling behavior of a tubular string in an inclined wellbore[J].Computer Modeling in Engineering & Sciences,2013,90(1):17-36.
[55] Huang Wenjun,Gao Deli.Sinusoidal buckling of a thin rod with connectors constrained in a cylinder[J].Journal of Natural Gas Science and Engineering,2014,18:237-246.
[56] Huang Wenjun,Gao Deli,Wei Shaolei,et al.Boundary conditions:a key factor in tubular-string buckling[J].SPE Journal,2015,20(6):1409-1420.
[57] Huang Wenjun,Gao Deli,Liu,Fengwu.Buckling analysis of tubular strings in horizontal wells[J].SPE Journal,2015,20(2):405-416.
[58] Huang Wenjun,Gao Deli.Helical buckling of a thin rod with connectors constrained in a torus[J].International Journal of Mechanical Sciences,2015,98:14-28.
[59] 刘峰,王鑫伟.等曲率井中有重钻柱屈曲的非线性有限元分析[J].力学学报,2005,37(5):593-599.
Liu Feng,Wang Xinwei.Nonlinear finite element buckling analysis of tubing with weight in constant-curvature wells[J].Chinese Journal of Theoretical and Applied Mechanics,2005,37(5):593-599.
[60] 刘峰,王鑫伟,甘立飞.基于有限元分析的直井中钻柱螺旋屈曲临界载荷定义[J].工程力学,2007,24(1):173-177.
Liu Feng,Wang Xinwei,Gan Lifei.The definition of helical buckling critical load of tubing in straight wells based on the finite element analysis[J].Engineering Mechanics,2007,24(1):173-177.
[61] 袁张贤,王鑫伟.斜直圆筒内基于Euler-Rodrigues参数的细长杆螺旋屈曲研究[J].计算物理,2012,29(4):549-556.
Yuan Zhangxian,Wang Xinwei.Helix buckling of a slender rod in inclined cylinder:analysis with Euler-Rodrigues parameters[J].Chinese Journal of Computational Physics,2012,29(4):549-556.
[62] 龚伟安.压不弯杆件的室内模拟试验及其应用前景[J].力学与实践,1996,18(2):43-46.
Gong Wei'an.Indoor simulation experiment of unbending drill-collar and application prospect[J].Mechanics in Engineering,1996,18(2):43-46.
[63] 龚伟安.压不弯钻铤装置的理论探索[J].石油学报,1997,18(3):115-118.
Gong Wei'an.Theoretical analysis and simulating test of unbending drill-collar[J].Acta Petrolei Sinica, 1997,18(3):115-118.
[64] 龚伟安,拓佰民,沈亚鹏,等.不弯曲钻铤的室内试验及现场试验的效果分析[J].石油钻采工艺,1999,21(3):1-9.
Gong Wei'an,Tuo Baimin,Shen Yapeng,et al.Analysis on lab and on-site testing results for unbending drill collar[J].Oil Drilling & Production Technology,1999,21(3):1-9.
[65] 李子丰."压不弯钻铤"缺乏理论基础[J].石油学报,1999,20(5):82-83.
Li Zifeng.Unbending drill-collar lack of theoretical basis[J].Acta Petrolei Sinica,1999,20(5):82-83.
[66] 焦永树,蔡宗熙,严宗达.铅垂井段钻柱的浑沌运动[J].振动工程学报,2000,13(2):314-318.
Jiao Yongshu,Cai Zongxi,Yan Zongda.Chaotic motion of a drillstring in vertical section[J].Journal of Vibration Engineering,2000,13(2):314-318.
[67] 焦永树,蔡宗熙,严宗达.铅垂井段钻柱的动力分岔研究[J].石油学报,2000,21(5):86-90.
Jiao Yongshu,Cai Zongxi,Yan Zongda.Dynamic bifurcation of the drillstring in vertical section[J].Acta Petrolei Sinica,2000,21(5):86-90.
[68] 王正湖,孟祥玉,曹锡玲,等.垂直井中旋转钻柱受拉段分岔研究[J].石油大学学报:自然科学版,2001,25(2):13-15.
Wang Zhenghu,Meng Xiangyu,Cao Xiling,et al.Study on bifurcation for tensile-rotating drillstring in vertical section of well[J].Journal of the University of Petroleum,China:Edition of Natural Science,2001,25(2):13-15.
[69] 焦永树,蔡宗熙,严宗达.井孔约束下水平井段钻柱的浑沌运动[J].固体力学学报,2001,22(1):64-68.
Jiao Yongshu,Cai Zongxi,Yan Zongda.Chaotic motion of the drillstring constrained by borehole in horizontal section[J].Acta Mechanica Solida Sinica,2001,22(1):64-68.
[70] 李子丰.近期国内钻柱静动力分岔研究及存在问题[J].石油机械,2004,32(6):68-70.
Li Zifeng.Some problems in the recent research of drillstring bifurcation[J].China Petroleum Machinery,2004,32(6):68-70.
[71] 宋执武,高德利.受拉钻铤结构及其防斜减振原理[J].西部探矿工程,2007,19(7):64-65.
Song Zhiwu,Gao Deli.The configuration of tensioned collar and its function of deviation control and vibration diminish[J].West-China Exploration Engineering,2007,19(7):64-65.
[72] 李子丰.内外压力对油井管柱等效轴向力及稳定性的影响[J].中国石油大学学报:自然科学版,2011,35(1):65-67.
Li Zifeng.Influence of internal and external pressure on equivalent axis force and stability of pipe string in oil wells[J].Journal of China University of Petroleum:Edition of Natural Science,2011,35(1):65-67.
[73] Li Zifeng.Using the fictitious force to judge the stability of pipe string is wrong[J].The Open Petroleum Engineering Journal,2013,6(1):57-60.
[74] 韩志勇.关于内外压力对油井管柱轴向力和稳定性影响问题的讨论[J].石油钻探技术,2013,41(6):12-18.
Han Zhiyong.Discussion on effects of internal and external pressure on axial force and stability of pipe string in oil wells[J].Petroleum Drilling Techniques,2013,41(6):12-18.
[75] 韩志勇.关于内外压力对油井管柱稳定性影响问题的再讨论[J].石油钻探技术,2014,42(4):14-20.
Han Zhiyong.Re-discussion on effects of internal and external pressures on stability of pipe string in oil wells[J].Petroleum Drilling Techniques,2014,42(4):14-20.
[76] Sun Youhong,Yu Yongping,Liu Baochang.A simple and accurate numeric solution procedure for nonlinear buckling model of drill string with frictional effect[J].Journal of Petroleum Science and Engineering,2015,128:44-52.
[77] Sun Youhong,Yu Yongping,Liu Baochang.Closed form solutions for predicting static and dynamic buckling behaviors of a drillstring in a horizontal well[J].European Journal of Mechanics-A/Solids,2015,49:362-372.
[78] Katz S,Givli S.The post-buckling behavior of a beam constrained by springy walls[J].Journal of the Mechanics and Physics of Solids,2015,78:443-466.
[79] Johancsik C A,Friesen D B,Dawson R.Torque and drag in directional wells-prediction and measurement[R].SPE 11380,1984.
[80] Sheppard M C,Wick C,Burgess T.Designing well paths to reduce drag and torque[R].SPE 15463,1987.
[81] Ho H S.An improved modeling program for computing the torque and drag in directional and deep wells[R]. SPE 18047,1988.
[82] 李子丰,刘希圣.水平井钻柱稳态拉力-扭矩模型及其应用[J].石油钻探技术,1992,20(4):1-6.
Li Zifeng,Liu Xisheng.Steady tension-torque model for drillstring in horizontal wells and its application[J].Petroleum Drilling Techniques,1992,20(4):1-6.
[83] Li Zifeng,Liu Xisheng,Zhou Daqian,et al.A steady tension-torque model for drillstring in horizontal wells[R].SPE 26295,1993.
[84] 李子丰,李相方,单志刚.海底大位移井井眼净化程度和卡钻可能性监测[J].石油钻探技术,2000,28(5):4-6.
Li Zifeng,Li Xiangfang,Shan Zhigang.Monitoring wellbore cleaning degree and sticking possibility in offshore extended wells[J].Petroleum Drilling Techniques,2000,28(5):4-6.
[85] 李子丰,李敬媛,孔凡君.钻柱拉力-扭矩模型述评[J].石油机械,1993,21(8):43-46.
Li Zifeng.Li Jingyuan,Kong Fanjun.Comment on tension-torque model of drillstrings[J].China Petroleum Machinery,1993,21(8):43-46.
[86] 李子丰,蒋恕,阳鑫军.油气井杆管柱力学研究现状和发展方向[J].石油机械,2002,30(12):30-33.
Li Zifeng,Jiangshu,Yang Xinjun.Current status and developing trend of mechanical study of rod and pipe strings in oil and gas wells[J].China Petroleum Machinery,2002,30(12):30-33.
[87] Tikhonov V,Valiullin K,Nurgaleev A,et al.Dynamic model for stiff-string torque and drag (see associated supplementary discussion)[J].SPE Drilling & Completion,2014,29(3):279-294.
[88] Li Zifeng.Comments on "dynamic model for stiff-string torque and drag"[published by Tikhonov,Vadim; Valiullin,Khaydar; Nurgaleev,Albert; Ring,Lev; Gandikota,Raju; Chaguine,Pavel; Cheatham,Curtis,SPE Drill.Compl.29(3) 279-294] [J].Journal of Petroleum Science and Engineering,2015,133:824-825.
[89] 杨勇,邵兵,王风锐,等.复杂结构井管柱力学模型及动态三维数字井筒[J].石油学报,2015,36(3):385-394.
Yang Yong,Shao Bing,Wang Fengrui,et al.String mechanical model for complex-structure wells and dynamic 3D digital shaft[J].Acta Petrolei Sinica,2015,36(3):385-394.
[90] 张学鸿,陈抡元,刘巨保.整体钻柱力学接触有限元分析[J].石油学报,1992,13(3):102-108.
Zhang Xuehong,Chen Lunyuan,Liu Jubao.Finite element analysis of the contact and friction of a whole drillpipe string[J].Acta Petrolei Sinica,1992,13(3):102-108.
[91] 帅健,吕英民,蔡强康.全井中钻柱的有限元模型及应用[J].石油学报,1995,16(1):118-126.
Shuai Jian,Lü Yingmin,Cai Qiangkang.Finite element model of the drill string in a whole well bore and its application[J].Acta Petrolei Sinica,1995,16(1):118-126.
[92] 郭永峰,金晓剑,谭树人.非线性有限元法预测近海水平井钻进摩阻[J].中国造船,2003,44(2):61-66.
Guo Yongfeng,Jin Xiaojian,Tan Shuren.Prediction of drilling drag and torque in horizontal wells of offshore oilfield by nonlinear FEM[J].Ship Building of China,2003,44(2):61-66.
[93] 付建红,龚龙祥,胡顺渠,等.基于ANSYS的水平井下套管摩阻分析计算[J].石油钻采工艺,2007,29(4):32-35.
Fu Jianhong,Gong Longxiang,Hu Shunqu,et al.Calculation of frictional drag of casing running in horizontal well based on ANSYS[J].Oil Drilling & Production Technology,2007,29(4):32-35.
[94] 祝效华,童华,刘清友,等.基于钻柱系统动力学的摩阻扭矩计算新方法[J].系统仿真学报,2007,19(21):4853-4856.
Zhu Xiaohua,Tong Hua,Liu Qingyou,et al.New method on calculation of torque and drag based on drilling string system dynamics[J].Journal of System Simulation, 2007,19(21):4853-4856.
[95] 付加胜,李根生,史怀忠,等.井下振动减摩技术研究进展[J].石油机械,2012,40(10):6-10.
Fu Jiasheng,Li Gensheng,Shi Huaizhong,et al.Research progress of the downhole vibration antifriction technology[J].China Petroleum Machinery,2012,40(10):6-10.
[96] 张云飞,贺会群,都亚男,等.连续管井下减阻器研究进展[J].石油机械,2015,43(7):36-41.
Zhang Yunfei,He Huiqun,Du Ya'nan,et al.The development of downhole drag reduction device for coiled tubing[J].China Petroleum Machinery,2015,43(7):36-41.
[97] 王鹏,倪红坚,王瑞和,等.基于微凸体接触的钻柱纵向振动减摩阻[J].中国石油大学学报:自然科学版,2015,39(1):88-94.
Wang Peng,Ni Hongjian,Wang Ruihe,et al.Friction reduction research of drill-string longitudinal vibration based on asperity contact[J].Journal of China University of Petroleum:Edition of Natural Science,2015,39(1):88-94.
[98] 李子丰,杨海滨,许春田,等.定向井滑动钻进送钻原理与技术[J].天然气工业,2013,33(12):94-98.
Li Zifeng,Yang Haibin,Xu Chuntian,et al.Bit feed principles and technologies in slide-drilling directional wells[J].Natural Gas Industry,2013,33(12):94-98.
[99] Walker B H,Friedman M B.Three-dimensional force and deflection analysis of a variable cross section drill string[J].Journal of Pressure Vessel Technology,1977,99(2):367-373.
[100] Millheim K K,Apostal M C.The effect of bottomhole assembly dynamics on the trajectory of a bit[J].Journal of Petroleum Technology,1981,33(12):2323-2338.
[101] Ho H S.General formulation of drillstring under large deformation and its use in BHA analysis[R].SPE 15562,1986.
[102] 白家祉.应用纵横弯曲连续梁理论求解钻具组合的受力与变形[C]//北京国际石油工程会议论文集.北京:北京国际石油工程,1982:67-69.
Bai Jiazhi.Bottom hole assembly problems solved by beam-column theory[C]//Beijing International Petroleum Engineering Conference Proceedings.Beijing:Beijing International Petroleum Engineering,1982:67-69.
[103] 白家祉,林小敏.纵横弯曲法对钻具组合的二维分析[J].石油学报,1985,6(3):75-84.
Bai Jiazhi,Lin Xiaomin.Two-dimensional analysis of bottom hole assembly by beam-column theory[J].Acta Petrolei Sinica,1985,6(3):75-84.
[104] 白家祉,黄惠泽,刘玉石.纵横弯曲法对钻具组合的三维分析[J].石油学报,1989,10(2):60-66.
Bai Jiazhi,Huang Huize,Liu Yushi.Three-dimensional analysis of bottom hole assembly by beam-column theory[J].Acta Petrolei Sinica,1989,10(2):60-66.
[105] 苏义脑,白家祉.用纵横弯曲法对弯接头——井下动力钻具组合的三维分析[J].石油学报,1991,12(3):110-120.
Su Yi'nao,Bai Jiazhi.Three-dimensional analysis of down hole motor with bent sub using beam-column theory[J].Acta Petrolei Sinica,1991,12(3):110-120.
[106] 苏义脑,唐雪平,陈祖锡.初弯曲纵横弯曲梁的等效载荷法及其应用[J].力学与实践,2004,26(1):42-44.
Su Yi'nao,Tang Xueping,Chen Zuxi.Equivalent loading method for solving beam-column with initial bending and its application in drilling engineering[J].Mechanics in Engineering,2004,26(1):42-44.
[107] 刘希圣,高德利,崔孝秉.底部钻具组合三维静力分析的权余法[J].石油大学学报:自然科学版,1988,12(3):58-67.
Liu Xisheng,Gao Deli,Cui Xiaobing.Weighted residuals method for Three-dimension static analysis of bottom hole assembly[J].Journal of the University of Petroleum,China:Edition of Natural Science,1988,12(3):58-67.
[108] 高德利.钻头与地层相互作用研究、BHA权余法分析及井眼轨迹控制技术[D].北京:石油大学,1990.
Gao Deli.Research on rock-bit interaction,BHA weighted residuals method analysis and well path control[D].Beijing:University of Petroleum,China,1990.
[109] 高德利,徐秉业.石油钻井底部钻具组合大挠度三维分析[J].应用力学学报,1995,12(1):53-62.
Gao Deli,Xu Bingye.Three-dimensional analysis of the static behavior of BHA under large deflection[J].Chinese Journal of Applied Mechanics,1995,12(1):53-62.
[110] 高德利.井眼轨迹控制问题的力学分析方法[J].石油学报,1996,17(1):115-121.
Gao Deli.A mechanical model for prediction and control of the wellbore trajectory[J].Acta Petrolei Sinica, 1996,17(1):115-121.
[111] 郭宗禄,高德利,杨文强,等.下部钻具组合上切点的位置确定方法[J].石油钻探技术,2014,42(2):46-51.
Guo Zonglu,Gao Deli,Yang Wenqiang,et al.A method for determining upper tangential point at bottomhole assembly[J].Petroleum Drilling Techniques,2014,42(2):46-51.
[112] 李子丰.定向水平井钻柱拉力-扭矩模型、导向钻具大小挠度力学分析及轨迹控制理论[D].北京:石油大学,1992.
Li Zifeng.A study drillstring tension and torque model in directional/horizontal wells,analysis of the steerable downhole motor assembly under large and small deflections,theory of drilling trajectory control[D].Beijing:University of Petroleum,China,1992.
[113] 李子丰,刘希圣.导向钻具组合三维小挠度力学分析[J].石油钻探技术,1993,21(2):1-6.
Li Zifeng,Liu Xisheng.3D mechanical analysis method of steering BHA under small defection[J].Petroleum Drilling Techniques,1993,21(2):1-6.
[114] 李子丰,刘希圣.下部钻具三维大挠度静力分析[J].石油大学学报:自然科学版,1994,18(4):37-42.
Li Zifeng,Liu Xisheng.Static behavior of bottom hole assembly under large defection in 3-D curved borehole[J].Journal of the University of Petroleum,China:Edition of Natural Science,1994,18(4):37-42.
[115] 李子丰,孙玉学,刘希圣.井眼轨迹预测的数学模型[J].大庆石油学院学报,1995,19(2):6-9.
Li Zifeng,Sun Yuxue,Liu Xisheng.Mathematical model for predicting well bore trajectory[J].Journal of Daqing Petroleum Institute,1995,19(2):6-9.
[116] 李子丰.井眼轨道控制理论[M].北京:石油工业出版社,1996:1-93.
Li Zifeng.Theory of wellbore trajectory control[M].Beijing:Petroleum Industry Press,1996:1-93.
[117] Li Zifeng,Ma Xingrui,Huang Wenhu,et al.A 3D analysis of a bottomhole assembly under large deflection[J].SPE Drilling & Completion,1996,11(2):104-110.
[118] 李子丰,赵新瑞,赵德云.通用下部钻具三维小挠度静力分析的数学模型及应用[J].工程力学,2000,17(6):121-129.
Li Zifeng,Zhao Xinrui,Zhao Deyun.A methematical model for 3D analysis of general bottomhole assembly under small deflection and its application[J].Engineering Mechanics,2000,17(6):121-129.
[119] 赵金海,李子丰,张桂林,等.对不同轴式下部钻具组合动态特性的初探与思考[J].岩土力学,2003,24(S):392-394.
Zhao Jinhai,Li Zifeng,Zhang Guilin,et al.A preliminary study on dynamic influencing factors for bottom-hole assembly with bending angle or bias axis[J].Rock and Soil Mechanics,2003,24(S):392-394.
[120] 李子丰,赵金海,李敬元.旋转导向钻具三维小挠度稳态分析的数学模型[J].石油学报,2004,25(1):84-88.
Li Zifeng,Zhao Jinhai,Li Jingyuan.Mathematical models for 3D analysis of rotary steering bottom hole assembly with small deflection[J].Acta Petrolei Sinica,2004,25(1):84-88.
[121] Li Zifeng,Li Jingyuan.Mathematical models for 3D analysis of rotary steering BHA under small deflection[J].Journal of Energy Resources Technology,2008,130(1):013101.
[122] 李子丰,李敬媛.三维钻速方程及其反演模型[J].西部探矿工程,1994,6(2):8-11.
Li Zifeng,Li Jingyuan.Three dimensional drilling yelocity equation and its reverse evolution model[J].West-China Exploration Engineering,1994,6(2):8-11.
[123] 李敬元,李子丰.井眼轨道预测的实现[J].天然气工业,2005,25(5):62-64.
Li Jingyuan,Li Zifeng.Realization of well path prediction[J].Natural Gas Industry,2005,25(5):62-64.
[124] 李子丰.钻柱力学研究中几个值得探讨的问题[J].石油机械,1996,24(8):32-35.
Li Zifeng.Some problems with study of drillstem mechanics[J].China Petroleum Machinery,1996,24(8):32-35.
[125] 蒋恕,李子丰.钻头处的边界条件研究[J].石油钻采工艺,2001,23(4):34-35.
Jiang Shu,Li Zifeng.Study on the bit boundary condition[J].Oil Drilling & Production Technology,2001,23(4):34-35.
[126] 李子丰,李同林.传统底部钻具组合上切点边界条件的正确性[J].石油钻采工艺,2002,24(1):31-32.
Li Zifeng,Li Tonglin.Accuracy of the boundary conditions at the upper tangent of the conventional BHA[J].Oil Drilling & Production Technology,2002,24(1):31-32.
[127] 宋执武,高德利.不倒翁式偏心防斜钻具的设计[J].石油机械,2006,34(8):19-20.
Song Zhiwu,Gao Deli.Design of a tumbler eccentric and deviation-controlled drilling tool[J].China Petroleum Machinery,2006,34(8):19-20.
[128] 宋执武,高德利.自动防斜钻井钻具设计[J].钻采工艺,2007,30(3):1-2.
Song Zhiwu,Gao Deli.Design of a drilling tool for vertical drilling automatically[J].Drilling & Production Technology,2007,30(3):1-2.
[129] 帅健,蔡强康,吕英民.弯曲井眼中下部钻具组合的有限元分析[J].石油学报,1990,11(4):95-105.
Shuai Jian,Cai Qiangkang,Lü Yingmin.Finite element analysis of BHA in a curved directional well[J].Acta Petrolei Sinica,1990,11(4):95-105.
[130] 署恒木,吕英民,蔡强康.有限元法在底部钻具组合动态分析中的应用[J].石油大学学报:自然科学版,1990,14(6):54-61.
Shu Hengmu,Lü Yingmin,Cai Qiangkang.Application of finite element method to dynamic analysis of bottom-hole assembly[J].Journal of the University of Petroleum,China:Edition of Natural Science,1990,14(6):54-61.
[131] 刘巨保,张学鸿,孙超,等.水平井BHA控制井斜与方位机理及影响因素分析[J].大庆石油学院学报,1997,21(4):68-72.
Liu Jubao,Zhang Xuehong,Sun Chao,et al.Analysis of the theory and influence factors for the BHA to control inclination and azimuth in horizontal well[J].Journal of Daqing Petroleum Institute,1997,21(4):68-72.
[132] 狄勤丰,王文昌,胡以宝,等.钻柱动力学研究及应用进展[J].天然气工业,2006,26(4):57-59.
Di Qinfeng,Wang Wenchang,Hu Yibao,et al.Study and application of drilling string dynamics[J]. Natural Gas Industry,2006,26(4):57-59.
[133] 胡以宝,狄勤丰,邹海洋,等.钻柱动力学研究及监控技术新进展[J].石油钻探技术,2006,34(6):7-10.
Hu Yibao,Di Qinfeng,Zou Haiyang,et al.The new developments of monitoring technology and researches on drill string dynamics[J].Petroleum Drilling Techniques, 2006,34(6):7-10.
[134] Wolf S F,Zacksenhouse M,Arian A.Field measurements of downhole drillstring vibrations[R].SPE 14330,1985.
[135] Dunayevsky V A,Abbassian F,Judzis A.Dynamic stability of drillstrings under fluctuating weight on bit[R].SPE 14329,1993.
[136] Rey-Fabret I,Mabile M C,Oudin N.Detecting whirling behaviour of the drill string from surface measurements[R].SPE 38587,1997.
[137] Jansen J D.Whirl and chaotic motion of stabilized drill collars[R].SPE 20930,1992.
[138] 章扬烈,肖载阳,端木纲.旋转钻柱运动原理的研究[J].石油矿场机械,1988,17(2):1-7.
Zhang Yanglie,Xiao Zaiyang,Duanmu Gang.Research on rotary drill string movement principle[J].Oil Field Equipment,1988,17(2):1-7.
[139] 张广清,陈勉,路永明.斜直井段旋转钻柱稳定性试验研究[J].石油钻采工艺,2001,23(1):23-25.
Zhang Guangqing,Chen Mian,Lu Yongming.Test study on drilling stem stability of rotary drilling in the slant hole[J].Oil Drilling & Production Technology,2001,23(1):23-25.
[140] 管志川,靳彦欣,王以法.直井底部钻柱运动状态的实验研究[J].石油学报,2003,24(6):102-106.
Guan Zhichuan,Jin Yanxin,Wang Yifa.Experimental research on motion behavior of bottom drill string in straight hole[J].Acta Petrolei Sinica,2003,24(6):102-106.
[141] 史玉才,王军,朱江,等.下部钻柱反向涡动机理研究[J].石油钻探技术,2007,35(5):43-45.
Shi Yucai,Wang Jun,Zhu Jiang,et al.Research on backward whirling mechanism of bottom drillstring[J].Petroleum Drilling Techniques,2007,35(5):43-45.
[142] 管志川,邵冬冬,温欣,等.水平井眼中旋转钻柱运动特性的实验研究[J].工程力学,2013,30(5):340-345.
Guan Zhichuan,Shao Dongdong,Wen Xin,et al.Experimental research on motion states of bottom drilling string in horizontal well[J].Engineering Mechanics,2013,30(5):340-345.
[143] 邵冬冬,管志川,温欣,等.水平旋转钻柱横向振动特性试验[J].中国石油大学学报:自然科学版,2013,37(4):100-103.
Shao Dongdong,Guan Zhichuan,Wen Xin,et al.Experiment on lateral vibration characteristics of horizontal rotary drilling string[J].Journal of China University of Petroleum:Edition of Natural Science,2013,37(4):100-103.
[144] 李子丰,王兆运,阳鑫军,等.钻柱涡动分析及防涡稳定器设计[J].石油钻采工艺,2008,30(3):124-127.
Li Zifeng,Wang Zhaoyun,Yang Xinjun,et al.Swirling analysis of drilling strings and anti-whirl stabilizers design[J].Oil Drilling & Production Technology,2008,30(3):124-127.
[145] 高岩.三牙轮钻头钻进时钻柱轴向振动的特征[J].石油学报,2000,21(6):93-96.
Gao Yan.Axial vibration performance of drill string when drilling with three-cone bit[J].Acta Petrolei Sinica,2000,21(6):93-96.
[146] 王珍应,徐铭陶.钻柱纵向受迫振动的广义传递矩阵法[J].石油学报,1990,11(3):107-114.
Wang Zhenying,Xu Mingtao.Computing forced longitudinal vibration of drill string by generalized transfer matrix method[J].Acta Petrolei Sinica,1990,11(3):107-114.
[147] 刘清友,马德坤,汤小文.钻柱纵向振动模型的建立及求解方法[J].西南石油学院学报,1998,20(4):55-58.
Liu Qingyou,Ma Dekun,Tang Xiaowen.The method of solution and establishment for axial vibration model of drilling string[J].Journal of Southwest Petroleum Institute,1998,20(4):55-58.
[148] 刘清友,马德坤,钟青.钻柱扭转振动模型的建立及求解[J].石油学报,2000,21(2):78-82.
Liu Qingyou,Ma Dekun,Zhong Qing.A drilling string torsional vibration model and its solution[J].Acta Petrolei Sinica,2000,21(2):78-82.
[149] 吴泽兵,马德坤,况雨春.钻柱纵向振动仿真分析[J].石油学报, 2000,21(3):73-76.
Wu Zebing,Ma Dekun,Kuang Yuchun.Simulation of drill string's longitudinal vibration[J].Acta Petrolei Sinica,2000,21(3):73-76.
[150] 李子丰,于成金,李敬元.钻柱耦合振动[J].石油钻探技术,1992,20(2):16-17.
Li Zifeng,Yu Chengjin,Li Jingyuan.Drillstring coupled vibration[J].Petroleum Drilling Techniques,1992,20(2):16-17.
[151] 李子丰,李志刚.钻柱纵向振动分析[J].天然气工业,2004,24(6):70-73.
Li Zifeng,Li Zhigang.Analysis of longitudinal vibration of drill-string[J].Natural Gas Industry,2004,24(6):70-73.
[152] 李子丰,张永贵,侯绪田,等.钻柱纵向和扭转振动分析[J].工程力学,2004,21(6):203-210.
Li Zifeng,Zhang Yonggui,Hou Xutian,et al.Analysis of longitudinal and torsion vibration of drillstring[J].Engineering Mechanics,2004,21(6):203-210.
[153] Li Zifeng,Guo Boyun.Analysis of longitudinal vibration of drill string in air and gas drilling[R].SPE 107697,2007.
[154] 王文龙,李子丰.不同激振条件下减振器对钻柱纵向振动的影响[J].工程力学,2011,28(4):221-225.
Wang Wenlong,Li Zifeng.Influence of shock absorber on longitudinal vibration of drill string under different vibration inducing conditions[J].Engineering Mechanics,2011,28(4):221-225.
[155] 李子丰.对"钻柱纵向振动分析"一文的质疑[J].石油钻探技术,1989,17(1):62.
Li Zifeng.Comments on "drill string longitudinal vibration analysis"[J].Petroleum Drilling Techniques,1989,17(1):62.
[156] 王文龙,胡群爱,刘化伟,等.钻柱纵向振动分析与应用[J].振动与冲击,2011,30(6):229-233.
Wang Wenlong,Hu Qun'ai,Liu Huawei,et al.Analysis on longitudinal vibration of drill string and the corresponding application[J].Journal of Vibration and Shock,2011,30(6):229-233.
[157] Liu Xianbo,Vlajic N,Long Xinhua,et al.Nonlinear motions of a flexible rotor with a drill bit:stick-slip and delay effects[J].Nonlinear Dynamics,2013,72(1/2):61-77.
[158] Liu Xianbo,Vlajic N,Long Xinhua,et al.Coupled axial-torsional dynamics in rotary drilling with state-dependent delay:stability and control[J].Nonlinear Dynamics,2014,78(3):1891-1906.
[159] Liu Xianbo,Vlajic N,Long Xinhua,et al.State-dependent delay influenced drill-string oscillations and stability analysis[J].Journal of Vibration and Acoustics,2014,136(10):051008.
[160] Burgess T M,McDaniel G L,Das P K.Improving BHA tool reliability with drillstring vibration models:field experience and limitations[R].SPE 16109,1987.
[161] Dykstra M W,Chen D C K,Warren T M,et al.Drillstring component mass imbalance:a major source of downhole vibrations[R].SPE 29350,1996.
[162] Dykstra M W,Chen D C K,Warren T M.Experimental evaluations of drill bit and drill string dynamics[R].SPE 28323,1994.
[163] Heisig G,Neubert M.Lateral drillstring vibrations in extended-reach wells[R].SPE 59235,2000.
[164] Liao C M,Balachandran B,Karkoub M,et al.Drill-string dynamics:reduced-order models and experimental studies[J].Journal of Vibration and Acoustics,2011,133(4):041008.

[165] Liao C M,Vlajic N,Karki H,et al.Parametric studies on drill-string motions[J].International Journal of Mechanical Sciences,2012,54(1):260-268.
[166] Nandakumar K,Wiercigroch M.Stability analysis of a state dependent delayed,coupled two DOF model of drill-stringvibration[J].Journal of Sound and Vibration,2013,332(10):2575-2592.
[167] Vlajic N,Liao C M,Karki H,et al.Draft:stick-slip motions of a rotor-stator system[J].Journal of Vibration and Acoustics,2013,136(2):021005.
[168] Liu Xianbo,Vlajic N,Long Xinhua,et al.State-dependent delay influenced drill-string oscillations and stability analysis[J].Journal of Vibration and Acoustics,2014,136(5):051008.
[169] Chatjigeorgiou I K.Numerical simulation of the chaotic lateral vibrations of long rotating beams[J].Applied Mathematics and Computation,2013,219(10):5592-5612.
[170] Thompson J M T,van der Heijden G H M.A graphical criterion for the instability of elastic equilibria under multiple loads:with applications to drill-strings[J].International Journal of Mechanical Sciences,2013,68:160-170.
[171] Vlajic N,Fitzgerald T,Nguyen V,et al.Geometrically exact planar beams with initial pre-stress and large curvature:static configurations,natural frequencies,and mode shapes[J].International Journal of Solids and Structures,2014,51(19/20):3361-3371.
[172] 姚建林,狄勤丰,胡以宝,等.空气钻井斜直井眼中钻柱的动力学特性及失效机理[J].中国石油大学学报:自然科学版,2008,32(3):63-67.
Yao Jianlin,Di Qinfeng,Hu Yibao,et al.Dynamic characteristics and failure mechanism of drill string in straight hole with air drilling[J].Journal of China University of Petroleum:Edition of Natural Science,2008,32(3):63-67.
[173] 狄勤丰,朱卫平,姚建林,等.空气钻井钻具组合动力学特征及井斜机理研究[J].石油学报,2008,29(6):917-921.
Di Qinfeng,Zhu Weiping,Yao Jianlin,et al.Dynamic features of bottom hole assembly and borehole deviation mechanism in air drilling[J].Acta Petrolei Sinica,2008,29(6):917-921.
[174] 狄勤丰,王文昌,姚永汉,等.底部钻具组合动力学模型及涡动特性仿真[J].中国石油大学学报:自然科学版,2010,34(3):53-56.
Di Qinfeng,Wang Wenchang,Yao Yonghan,et al.Dynamics model and whirl features' simulation of bottom hole assembly[J].Journal of China University of Petroleum:Edition of Natural Science,2010,34(3):53-56.
[175] 胡以宝,狄勤丰,王文昌,等.斜直井眼中转速对钻柱动力学特性的影响[J].工程力学,2010,27(5):184-190.
Hu Yibao,Di Qinfeng,Wang Wenchang,et al.Influence of rotary table speed on the dynamic characteristics of drillsting in inclined straight hole[J].Engineering Mechanics,2010,27(5):184-190.
[176] 罗敏.管道内旋转细长梁固液耦合动力学分析[D].大庆:大庆石油学院,2009.
Luo Min.Fluid-structure interaction dynamic analysis of rotary slender beam in pipe[D].Daqing:Daqing Petroleum Institute,2009.
[177] 张强,刘巨保,罗敏,等.圆筒内旋转细长管与流体界面耦合的数值方法[J].计算力学学报,2011,28(4):601-606.
Zhang Qiang,Liu Jubao,Luo Min,et al.Numerical simulation on interface coupling of rotary slender pipe and fluid in cylinder[J].Chinese Journal of Computational Mechanics,2011,28(4):601-606.
[178] 刘巨保,罗敏,王琳,等.管道内旋转细长梁的固液耦合方法研究[J].工程力学,2011,28(4):251-256.
Liu Jubao,Luo Min,Wang Lin,et al.Methodology of fluid-structure interaction of rotary slender beam in pipe[J].Engineering Mechanics,2011,28(4):251-256.
[179] 祝效华,刘清友,童华.三维井眼全井钻柱系统动力学模型研究[J].石油学报,2008,29(2):288-291.
Zhu Xiaohua,Liu Qingyou,Tong Hua.Research on dynamics model of full hole drilling-string system with three-dimensional trajectory[J].Acta Petrolei Sinica,2008,29(2):288-291.
[180] 祝效华,贾彦杰,童华.气体钻井钻柱振动特性及控制措施[J].石油学报,2012,33(2):293-297.
Zhu Xiaohua,Jia Yanjie,Tong Hua.Vibrating characteristics of drill string in gas drilling and its control measures[J].Acta Petrolei Sinica,2012,33(2):293-297.
[181] 祝效华,胡志强.基于钻头破岩钻进的下部钻具横向振动特性研究[J].振动与冲击,2014,33(17):90-93.
Zhu Xiaohua,Hu Zhiqiang.Lateral vibration characteristics analysis of a bottom hole assembly based on interaction between bit and rock[J].Journal of Vibration and Shock,2014,33(17):90-93.
[182] 屈展,张绍槐.内含钻井液的钻柱涡动动力特性分析[J].天然气工业,1994,14(1):46-48.
Qu Zhan,Zhang Shaohuai.Analysing dynamic characteristics of drilling string eddy of inside containing drill fluid[J].Natural Gas Industry,1994,14(1):46-48.
[183] 屈展.钻井液流体力引起旋转石油钻柱涡动的理论分析[J].力学与实践,1994,16(3):49-51.
Qu Zhan.Theoretical analysis of drilling fluid cause rotary drill string whirl[J].Mechanics in Engineering,1994,16(3):49-51.
[184] 屈展,徐健学.内外钻井液作用下的旋转钻柱涡动分析[J].西安石油学院学报:自然科学版,1997,12(1):27-29.
Qu Zhan,Xu Jianxue.Whirling analysis of the rotary drill string by the action of drilling fluid inside and outside the drill string[J].Journal of Xi'an Petroleum Institute:Natural Science Edition,1997,12(1):27-29.
[185] 肖文生,张扬,钟毅芳.钻柱在钻井液和井壁摩阻共同作用下的涡动[J].中国机械工程,2004,15(4):334-338.
Xiao Wensheng,Zhang Yang,Zhong Yifang.Annulus whirling motion analysis of the rotary drill string under the actions of rubs between well-walls and drilling fluids[J].China Mechanical Engineering,2004,15(4):334-338.
[186] 李子丰,李敬元,马兴瑞,等.钻柱自转和公转诱发牛顿液体层流流动的数学模型[J].力学与实践,1995,17(5):51-52.
Li Zifeng,Li Jingyuan,Ma Xingrui,et al.Mathematical model of Newton liquid laminar flow induced by drillstring rotation and revolution[J].Mechanics in Engineering,1995,17(5):51-52.
[187] 崔海清,刘希圣.幂律流体偏心环空螺旋流中的二次流问题[J].水动力学研究与进展,1995,10(6):610-620.
Cui Haiqing,Liu Xisheng.On the secondary flow in the helical flow of the power-law fluids in eccentric annuli[J].Journal of Hydrodynamics,1995,10(6):610-620.
[188] 崔海清,刘希圣.非牛顿流体偏心环形空间螺旋流的速度分布[J].石油学报,1996,17(2):76-83.
Cui Haiqing,Liu Xisheng.Velocity distribution of helical flow of non-Newtonian fluid in eccentric annuli[J].Acta Petrolei Sinica,1996,17(2):76-83.
[189] 崔海清,季海军,蔡萌,等.流体在内管做行星运动的环空中流动的二次流[J].大庆石油学院学报,2005,29(2):16-18.
Cui Haiqing,Ji Haijun,Cai Meng,et al.The secondary flow in Newtonian fluid flow in annulus with the inner cylinder executing a planetary motion[J].Journal of Daqing Petroleum Institute,2005,29(2):16-18.
[190] 崔海清,裴晓含,蔡萌.幂律流体在内管做行星运动的环空中流动的二次流[J].石油学报,2007,28(1):134-138.
Cui Haiqing,Pei Xiaohan,Cai Meng.Secondary flow of power-law fluid flow in annulus with inner cylinder executing a planetary motion[J].Acta Petrolei Sinica,2007,28(1):134-138.
[191] 崔海清,修德艳,裴晓含,等.幂律流体在内管做行星运动的环空中流动时的内管法向应力分布[J].中国石油大学学报:自然科学版,2007,31(1):67-71.
Cui Haiqing,Xiu Deyan,Pei Xiaohan,et al.Normal stress distribution on the inner cylinder forced by power law fluid flowing in annulus with inner cylinder executing a planetary motion[J].Journal of China University of Petroleum:Edition of Natural Science,2007,31(1):67-71.
[192] 李子丰.钻柱涡动理论研究的必由之路——钻井液动力润滑学与钻柱动力学相结合[J].石油学报,2013,34(3):607-610.
Li Zifeng.An inevitable way in drill-string whirling research:Combination of drilling fluid power lubrication with drill string dynamics[J].Acta Petrolei Sinica,2013,34(3):607-610.
[193] Yigit A S,Christoforou A P.Coupled axial and transverse vibrations of oilwell drillstrings[J].Journal of Sound and Vibration,1996,195(4):617-627.
[194] Christoforou A P,Yigit A S.Active control of stick-slip vibrations:the role of fully coupled dynamics[R].SPE 68093,2001.
[195] Nandakumar K,Wiercigroch M.Stability analysis of a state dependent delayed,coupled two DOF model of drill-string vibration[J].Journal of Sound and Vibration,2013,332:2575-2592.
[196] Nandakumar K,Wiercigroch M.Galerkin projections for state-dependent delay differential equations with applications to drilling[J].Applied Mathematical Modeling,2013,37:1705-1722.
[197] Divenyi S,Savi MA,Wiercigroch M,et al.Drill-string vibration analysis using non-smooth dynamics approach[J].Nonlinear Dynamics,2012,70:1017-1035.
[198] Kapitaniak M,Hamaneh VV,Chávez JP,et al.Unveiling complexity of drill-string vibrations:Experiments and modeling[J].International Journal of Mechanical Sciences,2015,101-102:324-327.
[199] 狄勤丰,吴玉禄,石向前.预弯曲动力学防斜打快技术初探[J].石油学报,2003,24(3):86-89.
Di Qinfeng,Wu Yulu,Shi Xiangqian.Primary research on vertical and fast drilling technology with pre-bending dynamic method[J].Acta Petrolei Sinica,2003,24(3):86-89.
[200] 狄勤丰,朱卫平,姚建林,等.预弯曲动力学防斜打快钻具组合动力学模型[J].石油学报,2007,28(6):118-121.
Di Qinfeng,Zhu Weiping,Yao Jianlin,et al.Dynamic model of bottom hole assembly used in pre-bending dynamic vertical and fast drilling technology[J].Acta Petrolei Sinica,2007,28(6):118-121.
[201] 李子丰,赵金海,蒋恕.公转下部钻具受力与轨道控制的初步分析[J].石油钻采工艺,2003,25(6):35-37.
Li Zifeng,Zhao Jinhai,Jiang Shu.Preliminary study on influencing factors of the forces and trajectory control for bottom-hole assembly[J].Oil Drilling & Production Technology,2003,25(6):35-37.
[202] Ritto T G,Escalante M R,Sampaio R,et al.Drill-string horizontal dynamics with uncertainty on the frictional force[J].Journal of Sound and Vibration,2013,332(1):145-153.
[203] Ritto T G,Sampaio R.Measuring the efficiency of vertical drill-strings:a vibration perspective[J].Mechanics Research Communications,2013,52:32-39.
[204] Ritto T G.Bayesian approach to identify the bit-rock interaction parameters of a drill-string dynamical model[J].Journal of the Brazilian Society of Mechanical Sciences and Engineering,2015,37(4):1173-1182.
[205] 李茂华,徐守余,牛卫东.套管损坏建模方法简述[J].石油机械,2008,36(4):76-80.
Li Maohua,Xu Shouyu,Niu Weidong.Modeling approach briefly of casing damage[J].China Petroleum Machinery,2008,36(4):76-80.
[206] 房军,赵怀文,岳伯谦,等.非均匀地应力作用下套管与水泥环的受力分析[J].石油大学学报:自然科学版,1995,19(6):52-57.
Fang Jun,Zhao Huaiwen,Yue Boqian,et al.Analysis of loading propekty of casing and cement sheath under nonuniform geologic stress[J].Journal of the University of Petroleum,China:Edition of Natural Science,1995,19(6):52-57.
[207] 房军,岳伯谦,赵怀文,等.非均匀地应力作用下套管和水泥环表面受力特性分析[J].石油大学学报:自然科学版,1997,21(1):46-48.
Fang Jun,Yue Boqian,Zhao Huaiwen,et al.Buckling critical load of drill string for vertical plane in inclined hole[J].Journal of the University of Petroleum,China:Edition of Natural Science,1997,21(1):46-48.
[208] 房军,谷玉洪,米丰珍.非均匀载荷作用下套管挤压失效数值分析[J].石油机械,1999,27(7):34-37.
Fang Jun,Gu Yuhong,Mi Fengzhen.A numerical analysis of casing collapse under nonuniform load[J].China Petroleum Machinery,1999,27(7):34-37.
[209] 李志明,张颜福,王计平,等.蠕变地层中套管的附加载荷[J].石油钻采工艺,1999,21(5):10-13.
Li Zhiming,Zhang Yanfu,Wang Jiping,et al.Addtional load of casing used in creep formation[J].Oil Drilling & Production Technology,1999,21(5):10-13.
[210] 殷有泉,李志明,张广清,等.蠕变地层套管载荷分析研究[J].岩石力学与工程学报,2004,23(14):2381-2384.
Yin Youquan,Li Zhiming,Zhang Guangqing,et al.Study on casing loads in creep formations[J].Chinese Journal of Rock Mechanics and Engineering,2004,23(14):2381-2384.
[211] 殷有泉,蔡永恩,陈朝伟,等.非均匀地应力场中套管载荷的理论解[J].石油学报,2006,27(4):133-138.
Yin Youquan,Cai Yong'en,Chen Zhaowei,et al.Theoretical solution of casing loading in non-uniform ground stress field[J].Acta Petrolei Sinica,2006,27(4):133-138.
[212] 殷有泉,陈朝伟,李平恩.套管-水泥环-地层应力分布的理论解[J].力学学报,2006,38(6):835-842.
Yin Youquan,Chen Zhaowei,Li Ping'en.Theoretical solutions of stress distribution in casing-cement and stratum system[J].Chinese Journal of Theoretical and Applied Mechanics,2006,38(6):835-842.
[213] 李平恩,殷有泉,苏先樾.流变地层地应力场中套管载荷的理论解[J].北京大学学报:自然科学版,2007,43(1):11-16.
Li Ping'en,Yin Youquan,Su Xianyue.Theoretical solution of casing loads in rheological formation in tectonic stress field[J].Acta Scientiarum Naturalium Universitatis Pekinensis,2007,43(1):11-16.
[214] 陈朝伟,殷有泉,蔡永恩,等.利用套管变形测井资料反演储层应力场[J].岩石力学与工程学报,2007,26(4):734-739.
Chen Zhaowei,Yin Youquan,Cai Yong'en,et al.Back analysis of reservoir stress field with logging data of casing deformation[J].Chinese Journal of Rock Mechanics and Engineering,2007,26(4):734-739.
[215] 李子丰,杨敏嘉,李邦达.油井套管损坏的机理分析[J].石油钻采工艺,1985,7(4):47-53.
Li Zifeng,Yang Minjia,Li Bangda.Analysis of mechanism on production casing failure[J].Oil Drilling & Production Technology,1985,7(4):47-53.
[216] 李子丰,张永贵,阳鑫军.蠕变地层与油井套管相互作用力学模型[J].石油学报,2009,30(1):129-131.
Li Zifeng,Zhang Yonggui,Yang Xinjun.Mechanics model for interaction between creep formation and oil well casing[J].Acta Petrolei Sinica,2009,30(1):129-131.
[217] 尹虎,李黔,李建涛,等.利用套管变形量进行地应力反演[J].石油钻探技术,2012,40(3):54-57.
Yin Hu,Li Qian,Li Jiantao,et al.Inversion of in-situ stress with the amount of casing deformation[J].Petroleum Drilling Techniques,2012,40(3):54-57.
[218] 王力军,于永南,侯兴华,等.非均匀地应力下蠕变地层套管的载荷与变形关系[J].科学技术与工程,2013,13(5):1229-1233.
Wang Lijun,Yu Yongnan,Hou Xinghua,et al.Study on casing loads and deformation with non-uniform in-situ stresses in creep stratum[J].Science Technology and Engineering,2013,13(5):1229-1233.
[219] 李增亮,蔡俐娜,王木乐,等.地应力方向对椭圆套管强度的影响规律分析[J].石油机械,2013,41(11):14-16.
Li Zengliang,Cai Lina,Wang Mule,et al.Analysis of the influence law of ground stress direction on elliptic casing strength[J].China Petroleum Machinery,2013,41(11):14-16.
[220] 王宴滨,高德利,房军.套管-水泥环-地层多层组合系统受力特性分析[J].应用力学学报,2014,31(3):387-392.
Wang Yanbin,Gao Deli,Fang Jun.Mechanical characteristics analysis of casing-cement ring-formation multilayer composite system[J].Chinese Journal of Applied Mechanics,2014,31(3):387-392.
[221] 刘海龙,邓金根,赵军,等.非均匀地应力下水泥环完整性规律研究[J].科学技术与工程,2014,14(23):37-41.
Liu Hailong,Deng Jingen,Zhao Jun,et al.Study on cement sheath integrity under non-uniform situ-stress[J].Science Technology and Engineering,2014,14(23):37-41.
[222] 屈展,王小增,窦益华,等.非均匀载荷作用下偏心磨损套管稳定性准则[J].工程力学,2015,32(7):249-256.
Qu Zhan,Wang Xiaozeng,Dou Yihua,et al.Stability criterion of eccentric worn casing under the nonuniform external loadings[J].Engineering Mechanics,2015,32(7):249-256.
[223] Yin Fei,Gao Deli.Mechanical analysis and design of casing in directional well under in-situ stresses[J].Journal of Natural Gas Science and Engineering,2014,20:285-291.
[224] 陈朝伟.流变性地层套管等效外挤力[J].石油学报,2012,33(4):702-705.
Chen Zhaowei.Equivalent external casing pressure in rheological strata[J].Acta Petrolei Sinica,2012,33(4):702-705.
[225] 翟晓鹏,楼一珊,曹砚峰,等.蠕变岩层地层刚度和松弛时间对套管外挤力的影响[J].石油学报,2015,36(10):1299-1304.
Zhai Xiaopeng,Lou Yishan,Cao Yanfeng,et al.Influences of stratum stiffness and relaxation time of creep layers on external squeeze pressure of casing[J].Acta Petrolei Sinica,2015,36(10):1299-1304.
[226] 李子丰,杨海军,陈飞.蠕变性地层中套管有效外挤压力的计算方法探讨[J].石油钻探技术,2014,42(3):13-15.
Li Zifeng,Yang Haijun,Chen Fei.The calculation of the effective external pressure on casing in creep formation[J].Petroleum Drilling Techniques,2014,42(3):13-15.
[227] 宋吉水,张国亮,刘绍轩,等.射孔对套管抗挤强度影响[J].辽宁工程技术大学学报:自然科学版,2008,27(4):523-525.
Song Jishui,Zhang Guoliang,Liu Shaoxuan,et al.Effect produced by perforation on counter-extrusion intensity of casing[J].Journal of Liaoning Technical University:Natural Science,2008,27(4):523-525.
[228] 廖华林,管志川,马广军,等.深井超深井内壁磨损套管剩余强度计算[J].工程力学,2010,27(2):250-256.
Liao Hualin,Guan Zhichuan,Ma Guangjun,et al.Remaining strength calculation of internal wall worn casing in deep and ultra-deep wells[J].Engineering Mechanics,2010,27(2):250-256.
[229] 许志倩,闫相祯,杨秀娟.CO₂腐蚀对套管强度动态影响分析[J].机械工程学报,2014,50(1):169-177.
Xu Zhiqian,Yan Xiangzhen,Yang Xiujuan.Strength time varying analysis of casing with CO2 corrosion defects[J].Journal of Mechanical Engineering,2014,50(1):169-177.
[230] 赵均海,李艳,张常光,等.基于统一强度理论的石油套管柱抗挤强度[J].石油学报,2013,34(5):969-976.
Zhao Junhai,Li Yan,Zhang Changguang,et al.Collapsing strength for petroleum casing string based on unified strength theory[J].Acta Petrolei Sinica,2013,34(5):969-976.
[231] 李艳,赵均海,李楠,等.基于统一强度理论的厚壁套管柱三轴抗拉强度[J].工程力学,2015,32(1):234-240.
Li Yan,Zhao Junhai,Li Nan,et al.Tri-axial tension strength of thick-walled casing strings based on unified strength theory[J].Engineering Mechanics,2015,32(1):234-240.
[232] 陈庭根,管志川.钻井工程理论与技术[M].东营:石油大学出版社,2000:261-262.
Chen Tinggen,Guan Zhichuan.Theory and technology of drilling engineering[M].Dongying:China University of Petroleum Press,2000:261-262.
[233] 赵怀文.关于管的抗挤计算的若干问题——答"试论套管挤压理论中的几个问题"[J].石油矿场机械,1981(2):17-31.
Zhao Huaiwen.Some problems about pipe collapsing calculation-answer to "try to discuss about several problems of the theory of casing extrusion"[J].Oil Field Equipment,1981(2):17-31.
[234] 龚伟安.再论不均壁厚圆管的弹性失稳问题[J].石油钻采工艺,1997,19(4):21-28.
Gong Wei'an.Study second time on loss of stability of thick circular pipe of non-uniform wall thickness[J].Oil Drilling & Production Technology,1997,19(4):21-28.
[235] 韩志勇.对双向应力椭圆理论的质疑[J].石油大学学报:自然科学版,2000,24(2):21-24.
Han Zhiyong.Questions to the ellipse of plasticity[J].Journal of the University of Petroleum,China:Edition of Natural Science,2000,24(2):21-24.
[236] 韩志勇.对我国《套管柱强度设计方法》标准的疑问[J].石油钻探技术,2004,32(5):1-5.
Han Zhiyong.Discussion on the revised standard-design method for casing string strength[J].Petroleum Drilling Techniques,2004,32(5):1-5.
[237] 韩志勇.关于套管柱三轴抗挤强度设计问题的讨论[J].石油大学学报:自然科学版,2004,28(5):43-48.
Han Zhiyong.Discussion on the new design standard for tri-axial stress anti-collapse strength of casing string[J].Journal of the University of Petroleum,China:Edition of Natural Science,2004,28(5):43-48.
[238] 韩志勇.对《套管柱井口悬挂载荷计算方法》的几点意见[J].石油钻探技术,2011,39(1):1-5.
Han Zhiyong.Comments on industry standard "wellhead casing suspended load calculation method"[J].Petroleum Drilling Techniques,2011,39(1):1-5.
[239] 韩志勇.关于"套管柱三轴抗拉强度公式"的讨论[J].中国石油大学学报:自然科学版,2011,35(4):77-80.
Han Zhiyong.Discussing on formula of tri-axial tension strength of casing string[J].Journal of China university of Petroleum:Edition of Natural Science,2011,35(4):77-80.
[240] 韩来聚,贾江鸿,闫振来.基于应变的热采井套管设计方法[J].中国石油大学学报:自然科学版,2014,38(3):68-72.
Han Laiju,Jia Jianghong,Yan Zhenlai.A casing design method based on strain variations for wells in thermal recovery processes[J].Journal of China University of Petroleum:Edition of Natural Science,2014,38(3):68-72.
[241] 李子丰,吴德华,黄跃芳,等.井筒-地层动态温度场数学模型[J].石油钻采工艺,1996,18(1):54-58.
Li Zifeng,Wu Dehua,Huang Yuefang,et al.Mathematical model for temperature field of wellbore and formation[J].Oil Drilling & Production Technology,1996,18(1):54-58.
[242] 李子丰,吴德华,黄跃芳,等.套管柱和注汽管柱热弹性力学分析[J].石油钻采工艺,1995,17(6):62-68.
Li Zifeng,Wu Dehua,Huang Yuefang,et al.Thermoplastic mechanics analysis of casing string and tubing string during injecting steam[J].Oil Drilling & Production Technology,1995,17(6):62-68.
[243] 李子丰,马兴瑞,黄文虎,等.热采井套管柱力学分析[J].工程力学,1998,15(2):19-26.
Li Zifeng,Ma Xingrui,Huang Wenhu,et al.Mechanical analysis of casing in thermal recovery wells[J].Engineering Mechanics,1998,15(2):19-26.
[244] 李子丰,阳鑫军,王兆运,等.防止热采井套管热破坏的预压固井技术[J].工程力学,2008,25(6):219-224.
Li Zifeng,Yang Xinjun,Wang Zhaoyun,et al.Casing cementing with internal prepressurization for thermal recovery wells[J].Engineering Mechanics,2008,25(6):219-224.
[245] Li Zifeng.Casing cementing with half warm-up for thermal recovery wells[J].Journal of Petroleum Science and Engineering,2008,61(2/4):94-98.
[246] Li Zifeng.Casing cementing with internal pre-pressurization for thermal recovery wells[J].Journal of Canadian Petroleum Technology,2008,47(12):44-49.
[247] 李子丰,阳鑫军,王兆运,等.防止热采井套管热破坏的预膨胀固井技术[J].固体力学学报,2009,30(2):162-169.
Li Zifeng,Yang Xinjun,Wang Zhaoyun,et al.The pre-expansion technique to protect casing from thermal failure in thermal recovery wells[J].Chinese Journal of Solid Mechanics,2009,30(2):162-169.
[248] 梁政,邓雄.高温高压深井测试管柱力学研究初探[J].天然气工业,1998,18(4):62-65.
Liang Zheng,Deng Xiong.Primary discussion on the mechanical analysis of high temperature high pressure deep well testing pipe string[J].Natural Gas Industry,1998,18(4):62-65.
[249] 邓雄,梁政,余孝林.高温高压深井测试管柱三维力学分析[J].天然气工业,2000,20(4):54-57.
Deng Xiong,Liang Zheng,Yu Xiaolin.Three dimensional mechanic analysis of the testing string in deep well with high temperature and high pressure[J].Natural Gas Industry,2000,20(4):54-57.
[250] 高宝奎,高德利.高温高压井测试管柱变形增量计算模型[J].天然气工业,2002,22(6):52-54.
Gao Baokui,Gao Deli.Incremental calculation model of testing string deformation in a high-temperature and high-pressure well[J].Natural Gas Industry,2002,22(6):52-54.
[251] 于振东,李艳.试油测试射孔管柱的间隙元分析[J].应用力学学报,2003,20(1):73-77.
Yu Zhendong,Li Yan.Finite clearance element analysis of perforation tube string for testing for oil[J].Chinese Journal of Applied Mechanics,2003,20(1):73-77.
[252] Li Zifeng.Mechanical analysis of tubing string in well testing operation[J].Journal of Petroleum Science and Engineering,2012,90-91:61-69.
[253] 李敬元,李子丰,马兴瑞,等.热采井注汽管柱力学分析[J].工程力学,1998,15(3):51-60.
Li Jingyuan,Li Zifeng,Ma Xingrui,et al.Mechanics analysis of tubing in thermal recovery wells[J].Engineering Mechanics,1998,15(3):51-60.
[254] 李子丰,孙虎,苏金柱,等.压裂管柱力学分析理论与应用[J].应用基础与工程科学学报,2012,20(5):846-862.
Li Zifeng,Sun Hu,Su Jinzhu,et al.Theory and applications of mechanical analysis of tubing string in fracturing operation[J].Journal of Basic Science and Engineering,2012,20(5):846-862.
[255] Li Jingyuan,Li Zifeng.Mechanical analysis of tubing string in fracturing operation[J].The Open Petroleum Engineering Journal,2013,6(1):12-24.
[256] 刘巨保,张学鸿,朱振锐,等.水平井分流压裂管柱设计与力学分析[J].天然气工业,1998,18(2):46-48.
Liu Jiubao,Zhang Xuehong,Zhu Zhenrui,et al.Design and mechanical analysis of the fractional flow fracturing string in a horizontal well[J].Natural Gas Industry,1998,18(2):46-48.
[257] 练章华,张颖,赵旭,等.水平井多级压裂管柱力学、数学模型的建立与应用[J].天然气工业,2015,35(1):85-91.
Lian Zhanghua,Zhang Ying,Zhao Xu,et al.Establishment and application of mechanical and mathematical models for multi-stage fracturing strings in a horizontal well[J].Natural Gas Industry,2015,35(1):85-91.
[258] Gibbs S G.Predicting the behavior of sucker-rod pumping systems[J].Journal of Petroleum Technology,1963,15(7):769-778.
[259] Gibbs S G,Neely A B.Computer diagnosis of down-hole conditions in sucker rod pumping wells[J].Journal of Petroleum Technology,1966,18(1):91-98.
[260] Gibbs S G.Design and diagnosis of deviated rod-pumped wells[R].SPE 22787,1992.
[261] 张少南,张玉斌,张跃武.有杆泵抽油装置的计算机诊断技术[J].大庆石油学院学报,1985,9(1):19-32.
Zhang Shaonan,Zhang Yubin,Zhang Yuewu.Computer diagnosis technology of sucker rod pumping unit[J].Journal of Daqing Petroleum Institute,1985,9(1):19-32.
[262] 陶景明,张少南,李子丰.有杆泵抽油井示功图的预測[J].大庆石油学院学报,1986,10(2):18-31.
Tao Jingming,Zhang Shaonan,Li Zifeng.Predicting the dynamometer cards of sucker-rod pump[J].Journal of Daqing Petroleum Institute,1986,10(2):18-31.
[263] 张少南,陶景明,李子丰.有杆泵抽油井计算机预测技术[J].石油钻采工艺,1986,6(4):45-50.
Zhang Shaonan,Tao Jingming,Li Zifeng.Computerized prediction technique for rod pumping wells[J].Oil Drilling & Production Technology,1986,6(4):45-50.
[264] 李子丰,陶景明,张少南.有杆泵抽油系统动态参数预测技术[J].大庆石油学院学报,1987,11(4):32-39.
Li Zifeng,Tao Jingming,Zhang Shaonan.A prediction technique for the behavior of sucker-rod pumping systems[J].Journal of Daqing Petroleum Institute,1987,11(4):32-39.
[265] 李敬媛,李子丰.抽油机旋转平衡新设想[J].大庆石油学院学报,1988,12(2):21-26.
Li Jingyuan,Li Zifeng.A new idea of pumping unit rotational balance[J].Journal of Daqing Petroleum Institute,1988,12(2):21-26.
[266] Feng Ziming,Ding Huanhuan,Jiang Minzheng.New secondary balancing method saves energy for crank-balanced rod-pumping application[J].SPE Production & Operations,2015,30(2):141-145.
[267] Xing Mingming,Dong Shimin.A new simulation model for a beam-pumping system applied in energy saving and resource-consumption reduction[J].SPE Production & Operations,2015,30(2):130-140.
[268] 隋少波.螺杆泵抽油杆柱的摩擦力矩计算[J].石油机械,1988,16(11):37-43.
Sui Shaobo.Frictional moment calculation of Screw-pump sucker rods[J].China Petroleum Machinery,1988,16(11):37-43.
[269] 高圣平.井下单螺杆抽油泵杆柱受力分析与设计[J].石油机械,1997,25(1):8-10.
Gao Shengping.Force analysis and design of rod string on single screw pump system[J].China Petroleum Machinery,1997,25(1):8-10.
[270] 李敬元,李子丰,魏继德,等.螺杆泵驱动杆柱力学分析及稳定器布置[J].石油机械,1998,26(1):13-17.
Li Jingyuan,Li Zifeng,Wei Jide,et al.Force analysis of rod string on screw pump system and allocation of stabilizers[J].China Petroleum Machinery,1998,26(1):13-17.
[271] 吴晓东,陈德春,薛建泉,等.地面驱动螺杆泵井节点系统优化设计技术[J].石油大学学报:自然科学版,1999,23(5):49-52.
Wu Xiaodong,Chen Dechun,Xue Jianquan,et al.Optimizing design for surface drived progressing cavity pumping wells by using nodal system analysis[J].Journal of the University of Petroleum,China:Edition of Natural Science,1999,23(5):49-52.
[272] 董世民,李志刚.螺杆泵采油杆柱扭转振动固有频率的计算方法[J].石油矿场机械,2006,35(3):34-37.
Dong Shimin,Li Zhigang.Research on the mechanical model and natural frequencies of torsion vibration of the rod string of screw production systems[J].Oil Field Equipment,2006,35(3):34-37.
[273] 范青,练章华,邓玮,等.三高气井管柱损伤研究现状[J].重庆科技学院学报:自然科学版,2010,12(2):63-67.
Fan Qing,Lian Zhanghua,Deng Wei,et al.Three high gas wells column injury status research and development[J].Journal of Chongqing University of Science and Technology:Natural Sciences Edition,2010,12(2):63-67.
[274] 樊洪海,王宇,张丽萍,等.高压气井完井管柱的流固耦合振动模型及其应用[J].石油学报,2011,32(3):547-550.
Fan Honghai,Wang Yu,Zhang Liping,et al.A fluid-solid coupled oscillation model for completion string and its application in high pressure gas well[J].Acta Petrolei Sinica,2011,32(3):547-550.
[275] 练章华,林铁军,刘健,等.水平井油管柱射孔振动的有限元分析[J].石油钻采工艺,2006,28(1):56-59.
Lian Zhanghua,Lin Tiejun,Liu Jian,et al.Finite-element analysis of tube string vibration on horizontal well[J].Oil Drilling & Production Technology,2006,28(1):56-59.
[276] 陈华彬,唐凯,任国辉,等.超深井射孔管柱动态力学分析[J].测井技术,2010,34(5):487-491.
Chen Huabin,Tang Kai,Ren Guohui,et al.String dynamic mechanics analysis on ultra-deep perforation[J].Well Logging Technology,2010,34(5):487-491.
[277] 伍开松,赵云,柳庆仁,等.高压射孔测试管柱力学行为仿真[J].石油矿场机械,2011,40(5):74-77.
Wu Kaisong,Zhao Yun,Liu Qingren,et al.Mechanical behavior simulation of high-pressure perforating testing string[J].Oil Field Equipment,2011,40(5):74-77.
[278] 蔡履忠,赵烜,薛世峰,等.射孔作业过程管柱结构动态响应分析[J].石油矿场机械,2015,44(5):26-30.
Cai Lüzhong,Zhao Xuan,Xue Shifeng,et al.Dynamic response analysis of string structure during perforating process[J].Oil Field Equipment,2015,44(5):26-30.
[279] 练章华,施太和,韩建增.膨胀套管摩擦系数与轴向位移的模拟研究[J].石油机械,2002,30(1):1-3.
Lian Zhanghua,Shi Taihe,Han Jianzeng.Computer simulatdion study of friction factor of expandable casing and is axial displacement[J].China Petroleum Machinery,2002,30(1):1-3.
[280] 练章华,施太和,杨龙,等.膨胀套管计算机仿真分析[J].天然气工业,2003,23(4):41-43.
Lian Zhanghua,Shi Taihe,Yang Long,et al.Computer simulating analysis of expandable casing[J].Natural Gas Industry,2003,23(4):41-43.
[281] 李子丰,李敬元,赵平,等.膨胀筛管力学分析[J].石油机械,2003,31(12):6-8.
Li Zifeng,Li Jingyuan,Zhao Ping,et al.Mechanical analysis of expandable screen pipe[J].China Petroleum Machinery,2003,31(12):6-8.
[282] Li Zifeng,Yao Dongping,Samuel R.Simplified model for expansion and contraction of slotted tubulars[J].Journal of Petroleum Science and Engineering,2010,72(3/4):244-250.
[283] 李华桂,吴竞择.海洋钻井隔水管顶张力分析[J].西南石油学院学报,1994,16(4):84-90.
Li Huagui,Wu Jingze.Top tension analysis of offshore drilling riser[J].Journal of Southwest——China Petroleum Institute,1994,16(4):84-90.
[284] 贾星兰,方华灿.海洋钻井隔水管的动力响应[J].石油机械,1995,23(8):18-22.
Jia Xinglan,Fang Huacan.Dynamic response of riser system in marine drilling[J].China Petroleum Machinery,1995,23(8):18-22.
[285] 李华桂.海洋钻井隔水管的动力分析[J].石油学报,1996,17(1):122-127.
Li Huagui.Dynamic analysis of offshore drilling riser[J].Acta Petrolei Sinica,1996,17(1):122-127.
[286] 陈国明,刘秀全,畅元江,等.深水钻井隔水管与井口技术研究进展[J].中国石油大学学报:自然科学版,2013,37(5):129-139.
Chen Guoming,Liu Xiuquan,Chang Yuanjiang,et al.Advances in technology of deepwater drilling riser and wellhead[J].Journal of China University of Petroleum:Edition of Natural Science,2013,37(5):129-139.
[287] 李子丰,王鹏,赵民,等.深水隔水管横向振动力学分析[J].振动、测试与诊断,2013,33(6):1003-1007.
Li Zifeng,Wang Peng,Zhao Min,et al.Transverse vibration analysis of the riser in deepwater[J].Journal of Vibration,Measurement & Diagnosis,2013,33(6):1003-1007.
[288] Li Zifeng,Wang Peng,Zhao Min,et al.Transverse vibration analysis of the riser in deep water[J].The Open Petroleum Engineering Journal,2015,8(1):38-44.
[289] 李成,丁天怀,陈恳.周期性管结构信道的声传输方法分析[J].振动与冲击,2009,28(2):12-15.
Li Cheng,Ding Tianhuai,Chen Ken.Analysis of acoustic transmission method in the periodic cascade Channel with its application to drill pipes[J].Journal of Vibration and Shock,2009,28(2):12-15.
[290] 李成,丁天怀,陈恳.底部钻柱近钻头动态力测量及声传输方法[J].机械工程学报,2009,45(12):257-262.
Li Cheng,Ding Tianhuai,Chen Ken.Acoustic transmission and measurement method for near-bit dynamic force signal of bottom drill string[J].Journal of Mechanical Engineering,2009,45(12):257-262.
[291] 李成,井中武,樊尚春,等.钻柱内声传输特性的信道建模与分析[J].振动、测试与诊断,2013,33(3):405-409.
Li Cheng,Jing Zhongwu,Fan Shangchun,et al.Modeling and analysis of acoustic transmission characteristics in drillstring[J].Journal of Vibration,Measurement & Diagnosis,2013,33(3):405-409.
[292] 李成,井中武,刘钊,等.钻柱信道内隔声体结构建模与仿真分析[J].振动与冲击,2013,32(22):53-56.
Li Cheng,Jing Zhongwu,Liu Zhao,et al.Modeling and simulation analysis for an acoustic isolation structure in a drillstring channel[J].Journal of Vibration and Shock,2013,32(22):53-56.
[293] 李成,刘钊,丁天怀,等.钻柱声传输信号多载波调制激励分析[J].振动与冲击,2014,33(3):1-4.
Li Cheng,Liu Zhao,Ding Tianhuai,et al.Multi-carrier modulation excitation analysis for acoustic transmission signal in a drillstring[J].Journal of Vibration and Shock,2014,33(3):1-4.
[294] 李成,刘钊,樊尚春,等.钻柱信道中声信号传输的接收特性分析[J].振动、测试与诊断,2014,34(4):744-748.
Li Cheng,Liu Zhao,Fan Shangchun,et al.Channel receiving characteristics for transmitted acoustic signal in a drill string[J].Journal of Vibration,Measurement & Diagnosis,2014,34(4):744-748.
[295] 赵国山,管志川,王以法,等.钻柱结构声传输特性试验研究[J].石油矿场机械,2009,38(11):45-49.
Zhao Guoshan,Guan Zhichuan,Wang Yifa,et al.Acoustical properties experimental study within drill strings[J].Oil Field Equipment,2009,38(11):45-49.
[296] 赵国山,管志川,刘永旺.声波在钻柱中的传播特性[J].中国石油大学学报:自然科学版,2010,34(1):55-59.
Zhao Guoshan,Guan Zhichuan,Liu Yongwang.Acoustic transmission properties in drill string[J].Journal of China University of Petroleum:Edition of Natural Science,2010,34(1):55-59.
[297] 管志川,刘永旺,赵国山,等.钻柱结构对声传输特性的影响[J].石油学报,2012,33(4):687-691.
Guan Zhichuan,Liu Yongwang,Zhao Guoshan,et al.Influence of the drill-string structure diversity on acoustic transmission characteristics[J].Acta Petrolei Sinica,2012,33(4):687-691.
[298] 刘永旺,管志川,隆志强,等.钻柱中声传播的影响因素[J].中国石油大学学报:自然科学版,2012,36(5):89-95.
Liu Yongwang,Guan Zhichuan,Long Zhiqiang,et al.Influence factors of acoustic transmission in drill strings[J].Journal of China University of Petroleum:Edition of Natural Science,2012,36(5):89-95.
[299] 刘瑞文,管志川,李春山.钻柱振动信号在线监测及应用[J].振动与冲击,2013,32(1):60-64.
Liu Ruiwen,Guan Zhichuan,Li Chunshan.Drilling string vibration online monitoring and its application[J].Journal of Vibration and Shock,2013,32(1):60-64.
[300] 刘永旺,管志川,都振川,等.周期性螺纹连接管结构中声波的频谱特性测试[J].中国石油大学学报:自然科学版,2015,39(2):58-62.
Liu Yongwang,Guan Zhichuan,Du Zhenchuan,et al.Spectrum characteristics testing of acoustic propagation in drill-string with periodic thread connections[J].Journal of China University of Petroleum:Edition of Natural Science,2015,39(2):58-62.
[301] 赵国山,管志川,都振川,等.井下钻柱信道的声传播特性[J].石油学报,2013,34(1):151-156.
Zhao Guoshan,Guan Zhichuan,Du Zhenchuan,et al.Acoustical propagation characteristics of the communication channel of downhole drill string[J].Acta Petrolei Sinica,2013,34(1):151-156.
[302] 刘永旺,管志川,赵国山,等.尺寸差异钻杆组成的钻柱中声传播特性测试[J].振动与冲击,2015,34(7):93-97.
Liu Yongwang,Guan Zhichuan,Zhao Guoshan,et al.Tests for acoustic propagation characteristics in drill string composed of size-difference drill pipes[J].Journal of Vibration and Shock,2015,34(7):93-97.
[303] 高智海,杨勇,赵克枫.套管磨损的研究进展[J].西安石油学院学报:自然科学版,1999,14(2):41-45.
Gao Zhihai,Yang Yong,Zhao Kefeng.Development in the research of casing wear[J].Journal of Xi'an Petroleum Institute:Edition of Natural Science,1999,14(2):41-45.
[304] 陈浩,刘承杰.大位移井套管柱磨损的探讨[J].石油矿场机械,2002,31(1):7-9.
Chen Hao,Liu Chengjie.A discussion on the casing wear in extended reach well[J].Oil Field Equipment,2002,31(1):7-9.
[305] 余磊,樊建春,张来斌,等.深井、超深井套管磨损机理及预测技术研究[J].润滑与密封,2004(5):87-90.
Yu Lei,Fan Jianchun,Zhang Laibin,et al.Recent advances in the research of casing wear mechanism and predicting methods in deep & ultra-deep well drilling engineering[J].Lubrication Engineering,2004(5):87-90.
[306] 林元华,付建红,施太和,等.套管磨损机理及其防磨措施研究[J].天然气工业,2004,24(7):58-61.
Lin Yuanhua,Fu Jianhong,Shi Taihe,et al.Research on casing wear mechanism and antiwear measures[J].Natural Gas Industry,2004,24(7):58-61.
[307] 王卫华,储胜利,樊建春.深井和超深井套管磨损研究现状及发展趋势[J].石油机械,2005,33(12):58-61.
Wang Weihua,Chu Shengli,Fan Jianchun.The research status and development trend of casing wear in deep and ultra-deep wells[J].China Petroleum Machinery,2005,33(12):58-61.
[308] 于会媛,张来斌,樊建春,等.深井、超深井套管磨损监测方法研究及应用[J].润滑与密封,2006(11):12-16.
Yu Huiyuan,Zhang Laibin,Fan Jianchun,et al.The research and application of monitor method of casing wear in deep & ultral deep well[J].Lubrication Engineering,2006(11):12-16.

[309] 梁尔国,李子丰,王长进,等.深井和大位移井套管磨损程度预测[J].石油钻探技术,2013,41(2):65-69.
Liang Erguo,Li Zifeng,Wang Changjin,et al.Casing abrasion prediction for deep and extended reach wells[J].Petroleum Drilling Techniques,2013,41(2):65-69.
[310] 梁尔国,李子丰,王金敏,等.油气井套管磨损规律试验研究[J].石油钻探技术,2015,43(1):69-74.
Liang Erguo,Li Zifeng,Wang Jinmin,et al.Experimental study on casing wear mechanism in oil and gas wells[J].Petroleum Drilling Techniques,2015,43(1):69-74.
[311] 黄毓林,戴祖福.套管腐蚀的预防及治理工艺技术[J].石油钻采工艺,1995,17(2):76-80.
Huang Yulin,Dai Zufu.Prevention and control technology of casing corrosion[J].Oil Drilling & Production Technology,1995,17(2):76-80.
[312] 毛克伟,史茂成.油气井套管腐蚀原因与防腐措施[J].石油钻探技术,1996,24(1):31-36.
Mao Kewei,Shi Maocheng.Cause and prevention of casing corrosion in oilwells[J].Petroleum Drilling Techniques,1996,24(1):31-36.
[313] 祝效华,刘少胡,童华.气体钻井钻杆冲蚀规律研究[J].石油学报,2010,31(6):1013-1017.
Zhu Xiaohua,Liu Shaohu,Tong Hua.A study on the drill pipe erosion law in gas drilling[J].Acta Petrolei Sinica,2010,31(6):1013-1017.
[314] 林铁军,练章华,陈世春,等.气体钻井中气体携岩对钻杆的冲蚀机理研究[J].石油钻采工艺,2010,32(4):1-4.
Lin Tiejun,Lian Zhanghua,Chen Shichun,et al.Study on drill pipe erosion of gas carrying cuttings in gas drilling[J].Oil Drilling & Production Technology,2010,32(4):1-4.
[315] 姚建林,狄勤丰,王文昌,等.空气水平井中钻柱冲蚀模型与分析[J].钻采工艺,2010,33(5):15-17.
Yao Jianlin,Di Qinfeng,Wang Wenchang,et al.Erosion analysis of cuttings in air drilling for horizontal well[J].Drilling & Production Technology,2010,33(5):15-17.
[316] 李东洋,王垒超,张涛,等.气体钻井中钻柱力学性能及冲蚀实验研究[J].西南石油大学学报:自然科学版,2012,34(4):158-164.
Li Dongyang,Wang Leichao,Zhang Tao,et al.Experimental research on mechanical properties and erosion of the drill string in gas drilling[J].Journal of Southwest Petroleum University:Science & Technology Edition,2012,34(4):158-164.
[317] 祝效华,刘少胡,陈绍安,等.气体钻井用钻杆磨损后剩余强度分析[J].石油机械,2011,39(3):25-27.
Zhu Xiaohua,Liu Shaohu,Chen Shao'an,et al.An analysis of the residual strength of the drill pipe for gas drilling after abrasion[J].China Petroleum Machinery,2011,39(3):25-27.
[318] 袁光杰,姚振强,林元华,等.套管钻井中套管疲劳失效问题的研究[J].天然气工业,2003,23(5):56-58.
Yuan Guangjie,Yao Zhenqiang,Lin Yuanhua,et al.Research on fatigue failures of casing in casing drilling[J].Natural Gas Industry,2003,23(5):56-58.
[319] 闫相祯,邓卫东,高进伟,等.套管钻井中套管柱疲劳可靠性及相关力学特性研究[J].石油学报,2009,30(5):769-773.
Yan Xiangzhen,Deng Weidong,Gao Jinwei,et al.Analysis on mechanics and fatigue reliability of casing string during casing drilling[J].Acta Petrolei Sinica,2009,30(5):769-773.
[320] 崔旭明,何富君,谭云,等.油管的疲劳强度分析[J].应用力学学报,2003,20(1):128-132.
Cui Xuming,He Fujun,Tan Yun,et al.Analysis of oil tube fatigue fracture[J].Chinese Journal of Applied Mechanics,2003,20(1):128-132.
[321] 李子丰,李雪娇,王鹏.预弯曲连续油管及其疲劳寿命预测[J].石油学报,2012,33(4):706-710.
Li Zifeng,Li Xuejiao,Wang Peng.Pre-bending coiled tubing and its fatigue life prediction[J].Acta Petrolei Sinica,2012,33(4):706-710.
[322] Li Zifeng,Li Xuejiao,Wang Peng.Prebending coiled tubing and its fatigue life prediction[J].Journal of Energy Resources Technology,2012,134(3):034502.
[323] 李子丰,赵文彬,陈礼强.杆管柱力学在医学中的应用前景[J].生物医学工程学杂志,2011,28(4):851-854.
Li Zifeng,Zhao Wenbin,Cheng Liqiang.A review on applications of tubular mechanics in medicine[J].Journal of Biomedical Engineering,2011,28(4):851-854.
[324] 李子丰,胡志兴,周兴美.油气井杆管柱力学在微米/纳米系统中的应用前景[J].中国西部科技,2010,9(9):16-19.
Li Zifeng,Hu Zhixing,Zhou Xingmei.Application possibilities of tubular mechanics in oil-gas wells in micro/nano systems[J].Science and Technology of West China,2010,9(9):16-19.