恒工具面角井眼轨道设计模型及求解方法

doi:10.7623/syxb201810011

石油学报 ›› 2018, Vol. 39 ›› Issue (10): 1193-1198.DOI: 10.7623/syxb201810011

恒工具面角井眼轨道设计模型及求解方法

唐雪平, 洪迪峰, 盛利民, 窦修荣, 王家进

中国石油集团工程技术研究院有限公司北京 102206

收稿日期:2017-12-18 修回日期:2018-06-28 出版日期:2018-10-25 发布日期:2018-12-05
通讯作者: 洪迪峰,男,1983年12月生,2006年获清华大学学士学位,2011年获清华大学博士学位,现为中国石油集团工程技术研究院有限公司高级工程师,主要从事力学和井下控制工程技术方面的研究。Email:hdfdr@cnpc.com.cn
作者简介:唐雪平,男,1964年2月生,1984年获西南石油学院学士学位,1998年获中国石油勘探开发研究院硕士学位,现为中国石油集团工程技术研究院有限公司教授级高级工程师,主要从事定向钻井和井下控制工程技术方面的研究。Email:txpdri@cnpc.com.cn
基金资助:
国家重点研发计划（2017YFC0307106）和中国石油集团公司科技项目（2016A-3906）资助。

Planning models and solving methods for well-path with constant tool face angle

Tang Xueping, Hong Difeng, Sheng Limin, Dou Xiurong, Wang Jiajin

CNPC Engineering Technology R&D Company Limited, Beijing 102206, China

Received:2017-12-18 Revised:2018-06-28 Online:2018-10-25 Published:2018-12-05

摘要/Abstract

摘要：

恒工具面角曲线是一种典型的井眼轨道设计模型组件，计算复杂，设计求解难度大。现有模型缺乏一般性，且求解模式单一，为此提出两种典型的恒工具面角井眼轨道设计模型，并寻求灵活、有效的求解方法。针对定向井和水平井一般设计问题，构建了单、双恒工具面角曲线与直线组合两种典型设计模型，探讨了多种设计变量求解方法。通过合理确定设计变量初值，采用拟牛顿数值求解方法，精确、快速、灵活地求解了这两种设计模型。算例应用结果表明，两种典型轨道设计模型及其求解方法合理、有效，可用于定向井和水平井轨道设计。

关键词: 定向钻井, 井眼轨道, 恒工具面角, 设计模型, 求解方法

Abstract:

Constant tool face angle curve is a typical component of well-path in planning, characterized by complex calculation and difficult design solution. The existing models are lack of generality and only have single solving mode, so two typical planning models of well-path with constant tool face angle are proposed to find the flexible and effective solving methods. Aiming at the common design problems of directional wells and horizontal wells, two typical planning models of single and dual constant tool face angle curve(s)combined with line are created to discuss multiple solving methods of design variables. Through rationally setting the initial value of design variable, the quasi-Newton numerical solving method is used to solve the above two types of planning models accurately, rapidly and flexibly. According to calculation examples, these two typical planning models of well-path and their solving methods are correct, reasonable and effective, able to be used for the well-path planning of directional or horizontal well, satisfying various kinds of application requirements.

Key words: directional drilling, well-path, constant tool face angle, planning model, solving method

中图分类号:

TE243

唐雪平, 洪迪峰, 盛利民, 窦修荣, 王家进. 恒工具面角井眼轨道设计模型及求解方法[J]. 石油学报, 2018, 39(10): 1193-1198.

Tang Xueping, Hong Difeng, Sheng Limin, Dou Xiurong, Wang Jiajin. Planning models and solving methods for well-path with constant tool face angle[J]. Acta Petrolei Sinica, 2018, 39(10): 1193-1198.

参考文献

[1] SCHUH F J. Trajectory equations for constant tool face angle deflections[R].SPE 23853,1992.
[2] GUO Boyun,MISKA S,LEE R L.Constant curvature method for planning a 3-D directional well[R].SPE 24381,1992.
[3] 韩志勇.三维定向井轨道设计和轨迹控制的新技术[J].石油钻探技术,2003,31(5):1-3.
HAN Zhiyong.The new techniques of well trajectory design and well path control fit for 3D-directional wells[J].Petroleum Drilling Techniques,2003,31(5):1-3.
[4] 方敏,鲁港,王立波.恒装置角曲线的半解析计算[J].同济大学学报:自然科学版,2008,36(6):844-848.
FANG Min,LU Gang,WANG Libo.Semi-analytic computing of constant-toolface-angle curves[J].Journal of Tongji University:Natual Science,2008,36(6):844-848.
[5] 王立波,鲁港.三维定向井轨道设计新方法-恒装置角法[J].石油钻采工艺,2009,31(1):18-21.
WANG Libo,LU Gang.A new approach to 3D direction well track design-the constant tool surface angle method[J].Oil Drilling & Production Technology,2009,31(1):18-21.
[6] MCMILLIAN W H.Planning the directional well-a calculation method[R].SPE 8337,1981.
[7] 白家祉,苏义脑.定向钻井过程中的三维井身随钻修正设计与计算[J].石油钻采工艺,1991,13(6):1-4.
BAI Jiazhi,SU Yinao.Design and calculation of 3D wellbore trajectories during directional drilling[J].Oil Drilling & Production Technology,1991,13(6):1-4.
[8] LIU Xiushan,SHI Zaihong.Improved method makes a soft landing of well path[J].Oil & Gas Journal,2001,99(43):47-51.
[9] 刘修善,石在虹.给定井眼方向的修正轨道设计方法[J].石油学报,2002,23(2):72-76.
LIU Xiushan,SHI Zaihong.A new method of path-correction planning with the desired direction[J].Acta Petrolei Sinica,2002,23(2):72-76.
[10] 唐雪平,苏义脑,陈祖锡.三维井眼轨道设计模型及其精确解[J].石油学报,2003,24(4):90-93.
TANG Xueping,SU Yinao,CHEN Zuxi.Three-dimensional well-path planning model and its exact solution[J].Acta Petrolei Sinica,2003,24(4):90-93.
[11] 唐雪平,苏义脑,陈祖锡.三维井眼轨道设计模型及应用[J].数学的实践与认识,2004,34(3):62-72.
TANG Xueping,SU Yinao,CHEN Zuxi.3D Well-path planning models and their application[J].Mathematics in Practice and Theory,2004,34(3):62-72.
[12] 唐雪平,苏义脑,盛利民,等.一种井眼轨道控制方法:中国,01110372333.3[P].2011-11-21.
TANG Xueping,SU Yinao,SHENG Limin,et al.A method of well-path control:CN,01110372333.3[P].2011-11-21.
[13] 鲁港.圆弧型井眼轨道设计问题的拟解析解理论[J].石油钻探技术,2014,42(1):26-32.
LU Gang.Quasi-analytic solution theory for arc type well trajectory design[J].Petroleum Drilling Techniques,2014,42(1):26-32.
[14] SAWARYN S J,THOROGOOD J L.A compendium of directional calculations based on the minimum curvature method[J].SPE Drilling & Completion,2005,20(1):24-36.
[15] 韩志勇.定向钻井设计与计算[M].东营:中国石油大学出版社,2007:238-245.
HAN Zhiyong.Design and calculation of directional drilling[M].Dongying:China University of Petroleum Press,2007:238-245.
[16] 国家能源局.定向井轨道设计与轨迹计算:SY/T 5435-2012[S].北京:石油工业出版社,2012.
National Energy Administration.Wellpath design & trajectory calculation for directional drilling:SY/T 5435-2012[S].Beijing:Petroleum Industry Press,2012.
[17] 鲁港,佟长海,夏泊洢,等.空间圆弧轨迹的矢量描述技术[J].石油学报,2014,35(4):759-764.
LU Gang,TONG Changhai,XIA Boyi,et al.Vector description of spatial-arc wellbore trajectory[J].Acta Petrolei Sinica,2014,35(4):759-764.
[18] 冯小科,汪松柏,胡亚鹏,等.多控制点水平井靶体边界计算[J].石油钻采工艺,2016,38(3):286-290.
FENG Xiaoke,WANG Songbo,HU Yapeng,et al.Calculation on the boundary of horizontal well target with multiple control points[J].Oil Drilling & Production Technology,2016,38(3):286-290.
[19] 唐宁,王少萍,洪迪峰.井眼测量误差椭球最小间距计算方法[J].石油学报,2017,38(11):1320-1325.
TANG Ning,WANG Shaoping,HONG Difeng.A calculation method of minimum distance between wellbore survey error ellipsoids[J].Acta Petrolei Sinica,2017,38(11):1320-1325.
[20] 宗艳波,王磊,史晓锋.SAGD成对水平井磁导向测距仪研制与应用[J].石油学报,2016,37(11):1428-1434.
ZONG Yanbo,WANG Lei,SHI Xiaofeng.Development and application of magnetic positioning system for SAGD pairing horizontal well[J].Acta Petrolei Sinica,2016,37(11):1428-1434.
[21] TRIBE I R,BURNS L,HOWELL P D,et al.Precise well placement using rotary steerable systems and LWD measurements[R].SPE 71396,2001
[22] 冯进.随钻测井在地层评价中的应用[J].中国海上油气(地质),2002,16(3):200-206.
FENG Jin.An application of logging while drilling (LWD)in formation evaluation[J].China Offshore Oil and Gas (Geology),2002,16(3):200-206.
[23] AL-MUDHHI M A,MA S M,AL-HAJARI A A,et al.Geo-steering with advanced LWD technologies-placement of maximum reservoir contact wells in a thinly layered carbonate reservoir[R].IPTC 10077,2005
[24] 蔡军,张恒荣,曾少军,等.随钻电磁波电阻率测井联合反演方法及其应用[J].石油学报,2016,37(3):371-381.
CAI Jun,ZHANG Hengrong,ZENG Shaojun,et al.Joint inversion method of electromagnetic wave resistivity logging while drilling and its application[J].Acta Petrolei Sinica,2016,37(3):371-381.
[25] 杨震,杨锦舟,韩来聚,等.随钻方位电磁波界面探测性能分析[J].石油学报,2016,37(7):930-938.
YANG Zhen,YANG Jinzhou,HAN Laiju,et al.Interface detection performance analysis of azimuthal electromagnetic while drilling[J].Acta Petrolei Sinica,2016,37(7):930-938.
[26] 高佳佳,邓金根,闫伟,等.基于井壁稳定控制建立井眼轨迹优化预测模型[J].石油学报,2016,37(9):1179-1186.
GAO Jiajia,DENG Jingen,YAN Wei,et al.Establishment of a prediction model for the borehole trajactory optimization based on controlling wellbore stability[J].Acta Petrolei Sinica,2016,37(9):1179-1186.

恒工具面角井眼轨道设计模型及求解方法

Planning models and solving methods for well-path with constant tool face angle

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王海涛, 郑鹏, 邓青山, 孙立伟, 鲁港, 孟庆安, 覃吉. 三段制圆弧轨道设计参数的谱集计算[J]. 石油学报, 2024, 45(4): 708-717.
[2]	鲁港, 王海涛, 李杉, 李雪松, 杨志国, 王建华, 邱晨. 三维七段制圆弧型井眼轨道设计的拟解析解[J]. 石油学报, 2023, 44(9): 1545-1551.
[3]	唐雪平, 洪迪峰, 高文凯, 彭烈新, 杨宝斌. 七段制恒工具面角三维水平井轨道设计方法[J]. 石油学报, 2022, 43(9): 1315-1324.
[4]	洪迪峰, 唐雪平, 高文凯, 吕海川. 圆弧型井眼轨道设计模型的综合求解法[J]. 石油学报, 2021, 42(2): 226-232.
[5]	鲁港, 习伟东, 来建强. 三维圆弧型井眼轨道设计模型的拟解析解[J]. 石油学报, 2020, 41(12): 1679-1685.
[6]	刘修善. 邻井距离解算及防碰评价[J]. 石油学报, 2019, 40(8): 983-989.
[7]	刘修善. 考虑磁偏角时空变化的实钻轨迹精准定位[J]. 石油学报, 2017, 38(6): 705-709.
[8]	刘修善, 苏义脑. 井斜控制方案设计方法[J]. 石油学报, 2015, 36(7): 890-896.
[9]	刘修善, 刘子恒. 井眼轨迹模型的通用格式[J]. 石油学报, 2015, 36(3): 366-371.
[10]	鲁港, 佟长海, 夏泊洢, 余雷. 空间圆弧轨迹的矢量描述技术[J]. 石油学报, 2014, 35(4): 759-764.
[11]	刘修善, 王超. 空间圆弧轨迹的解析描述技术[J]. 石油学报, 2014, 35(1): 134-140.
[12]	沈跃朱军苏义脑盛利民李林. 钻井液压力正交相移键控信号沿定向井筒的传输特性[J]. 石油学报, 2011, 32(2): 340-345.
[13]	刘修善. 二维井身剖面的通用设计方法[J]. 石油学报, 2010, 31(6): 1004-1008.
[14]	关成尧赵国春张翼翼陶军朱丽莉. 套管放气井环空流动与电泵井合理沉没度计算方法[J]. 石油学报, 2010, 31(1): 152-156.
[15]	刘修善. 三维侧钻绕障井的设计方法[J]. 石油学报, 2009, 30(6): 916-922.