TEMPERATURE RELATED CRACK PROPAGATION IN OFFSHORE PLATFORM STEEL A537

doi:10.7623/syxb199503020

Editorial office of ACTA PETROLEI SINICA ›› 1995, Vol. 16 ›› Issue (3): 129-133.DOI: 10.7623/syxb199503020

• Petroleum Engineering • Previous Articles Next Articles

TEMPERATURE RELATED CRACK PROPAGATION IN OFFSHORE PLATFORM STEEL A537

Fang Huacan¹, Duan Menglan²

1. Petroleum University, Beijing;
2. Cinese Academy of Scicences

Received:1993-07-09 Revised:1994-03-05 Online:1995-07-25 Published:2013-07-06

海洋平台用钢A537与温度相关的疲劳裂纹扩展

方华灿¹, 段梦兰²

1. 石油大学;
2. 中国科学院

作者简介:方华灿,1952年毕业于天津北洋大学现任石油大学(北京)校务委员会副主任,教授.通讯处:北京昌平水库路.邮政编码:102000.

Abstract

Abstract: The crack propagation characteristics of offshore platform steel A5 37,under constantloads,are studied at 238K,273K and 303K,using fracture mechanics.The relationship of fa-tigue crack growth rate with temperatures are determined and described by Yolobori Formu-la.Apivot point on the FCP diagram of steeI A537 is found and analyzed in detail.The frac-ture surfaces are observed under a scanning electron microscope,showing that the fracture ofsteel A537 under all the testing temperatures takes the form of microvoid coalescence,whichcharacterizes ductile fracture.

Key words: steel A537, crack, temperature

摘要： 用断裂力学研究了常幅载荷作用下A537钢在238K、273K和303K三个不同温度下的疲劳裂纹扩展特性.发现裂纹的扩展速率与试验温度密切相关,其相关关系满足Yokobori公式.试验结果集中在裂纹扩展图上曲线的交点,作为疲劳裂纹扩展的一个临界值,该点意义重大,本文对此进行了详细分析.对不同温度下疲劳裂纹的断口作了宏观和微观分析,发现宏观断口表面与温度密切相关,而微观形貌表现出相同的微空洞聚结的叠波断裂;说明三个温度下均为延性断裂.

关键词: A537钢, 裂纹, 温度

Fang Huacan, Duan Menglan. TEMPERATURE RELATED CRACK PROPAGATION IN OFFSHORE PLATFORM STEEL A537[J]. Editorial office of ACTA PETROLEI SINICA, 1995, 16(3): 129-133.

方华灿, 段梦兰. 海洋平台用钢A537与温度相关的疲劳裂纹扩展[J]. 石油学报, 1995, 16(3): 129-133.

[1]	Yang Bin, Xu Chengyuan, Zhang Hao, Guo Yufan, Yang Jian, Li Yue, Zhao Jianguo. Research progress on mechanism of wellbore instability in deep fractured formations and related countermeasures [J]. Acta Petrolei Sinica, 2024, 45(5): 875-888.
[2]	Xie Binqiang, Tao Huaizhi, Zhang Jun, Chen Jindong, Lü Junxian, Zhao Lin. Regulation of comb-type thermo-sensitive polymer on high-temperature rheological properties of solid-free water-based drilling fluid [J]. Acta Petrolei Sinica, 2024, 45(2): 427-436.
[3]	Xue Yucheng, Wang Chengwen, Chen Zehua, Sun Jinsheng, Tang Weixu, Wu Zhiqiang, Liu Bonuo, Huang Kang. Preparation of amphiphilic high-temperature retarder and its self-assembly and intelligent temperature response characteristics [J]. Acta Petrolei Sinica, 2023, 44(9): 1532-1544.
[4]	Chen Yilin, Qin Yong, Zhang Bo, Yang Tianyu, Liu Jing, Wang Lanhua, Hong Yong. Differential influence of sample particle size on the pore structure of coal with different metamorphic degree [J]. Acta Petrolei Sinica, 2023, 44(8): 1313-1332.
[5]	Wang Tengfei, Wang Liangliang, Wang Jiexiang, Fan Haiming, Bai Zongxian, Song Wei, Chen Yi. Low-temperature oxidation catalysis mechanism and oil reservoir adaptability of catalytic air flooding technique [J]. Acta Petrolei Sinica, 2023, 44(7): 1118-1128.
[6]	Lu Mengdie, Li Xianqing, Mi Jingkui, Zhai Jia, Luo Dongxu. Simulation of characteristics of oil/gas produced by in-situ heating of typical low-mature shale [J]. Acta Petrolei Sinica, 2023, 44(5): 765-777.
[7]	Ren Yanjun, Zhai Yufen, Lu Yanyan. Reversible oil-based drilling fluid with high-temperature resistance and high density [J]. Acta Petrolei Sinica, 2023, 44(5): 841-851,861.
[8]	Zhang Hong, Wu Kai, Feng Qingshan, Sui Yongli, Liu Xiaoben, Yang Yue, Yang Die, Dai Lianshuang, Wang Dongying, Wang Chong. Relationship between fracture toughness and crack tip constraint of high-strength pipe girth welds [J]. Acta Petrolei Sinica, 2023, 44(2): 385-393.
[9]	Ge Jijiang, Guo Hongbin, Zhang Tianci, Zhou Daiyu, Xu Ya, Lü Qi. Development of temperature and salinity resistant phenolic gel and its performance regulation mechanism [J]. Acta Petrolei Sinica, 2022, 43(8): 1145-1157.
[10]	Ge Jijiang, Shi Xiaojuan, Liu Ziming, Guo Hongbin, Li Longjie, Zhou Daiyu, Wang Wei. Content determination of lauroamide propyl dimethylammonium hydroxylsulbetaine in brine and analysis of its thermal stability [J]. Acta Petrolei Sinica, 2022, 43(4): 524-532.
[11]	Lu Baoping, Wang Zhizhan, Zhang Yuanchun. Progress of theories and methods for prediction and detection of pore pressure in carbonate rock [J]. Acta Petrolei Sinica, 2022, 43(4): 571-580.
[12]	Li Yuwei, Peng Genbo, Chen Mian, Zhang Jun, Wei Jianguang, Yang Chunguang. Gas-liquid-solid three phase flow model of CO₂ foam fracturing in wellbore [J]. Acta Petrolei Sinica, 2022, 43(3): 386-398.
[13]	Zhen Ying, Chang Qun, Li Fagen, Cao Yuguang, Niu Ruiyan. Battelle two-curve model correction based on crack tip opening angle [J]. Acta Petrolei Sinica, 2022, 43(11): 1642-1651,1663.
[14]	Gu Hao, Wang Guangfu, Yang Min, Cao Fei, Zheng Songqing, Shang Genhua, Zhu Lianhua, Han Dong, Kang Zhijiang, Zhao Yanyan, Liu Kunyan, Li Wangpeng. A method for estimating the drainage depth of oil well in ultra-deep fault-karst reservoirs and its guiding significance to oilfield development [J]. Acta Petrolei Sinica, 2021, 42(9): 1202-1211.
[15]	Zhong Hanyi, Gao Xin, Qiu Zhengsong, Lin Yongxue, Jin Junbin, Tang Zhichuan, Zhao Xin, Li Jia. Mechanism of filtration loss reduction of environment-friendly β-cyclodextrin polymer microspheres under high temperatures [J]. Acta Petrolei Sinica, 2021, 42(8): 1091-1102,1112.

TEMPERATURE RELATED CRACK PROPAGATION IN OFFSHORE PLATFORM STEEL A537

海洋平台用钢A537与温度相关的疲劳裂纹扩展

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments