A new method for PDC bit selection

doi:10.7623/syxb200503028

Editorial office of ACTA PETROLEI SINICA ›› 2005, Vol. 26 ›› Issue (3): 123-126.DOI: 10.7623/syxb200503028

• Petroleum Engineering • Previous Articles

A new method for PDC bit selection

PAN Qi¹, GAO De¹, SUN Shu², KONG Xiang²

1. Faculty of Petroleum Engineering, China University of Petroleum, Beijing 102249, China;
2. Research Institute of Oil & Gas Exploration and Development, Zhongyuan Oilfield, Puyang 457000, China

Received:2004-04-28 Revised:2004-08-23 Online:2005-05-25 Published:2010-05-21

PDC钻头选型新方法

潘起峰¹, 高德利¹, 孙书贞², 孔祥成²

1. 中国石油大学石油天然气工程学院北京 102249;
2. 中原油田勘探开发研究院河南濮阳 457000

作者简介:潘起峰,男,1971年12月生,1992年毕业于石油大学(华东)开发系,现为中国石油大学(北京)石油天然气工程学院在读博士研究生.E-mail:pan_qf@163.com

Abstract

Abstract: A new method for polycrystalline diamond compact(PDC)bit selection was presented.The rock mechanics parameters of a formation which are assessed from electric logging data were integrated into a numeric value to indicate the drillability of the formation.According to this value as well as the compressive strength and the angle of internal friction having great effect on the performance of a PDC bit,an appropriate PDC bit type can be selected on the basis of history records of PDC bits.Field test proved that the PDC bit chosen by this method was suitable for the encountered formations.This method is simple and easy in operation.

Key words: polycrystalline diamond compact bit, selection, rock mechanics parameter, formation drillability, field test

摘要： 采用综合方法,把由常规测井资料评价出来的地层岩石力学诸参数综合成一个值,作为评判待钻地层可钻性的标准。在此基础上,综合考虑了对PDC钻头应用效果影响较大的抗压强度和岩石内摩擦角这2个岩石力学参数,并结合研究区块PDC钻头使用记录,优选出适合待钻地层的PDC钻头型号。现场试验证明,该方法简单易行,应用效果良好。

关键词: PDC钻头, 选型方法, 岩石力学参数, 地层可钻性, 现场试验

CLC Number:

TE821.1

PAN Qi, GAO De, SUN Shu, KONG Xiang. A new method for PDC bit selection[J]. Editorial office of ACTA PETROLEI SINICA, 2005, 26(3): 123-126.

潘起峰, 高德利, 孙书贞, 孔祥成. PDC钻头选型新方法[J]. 石油学报, 2005, 26(3): 123-126.

[1]	Shi Xiaodong, Sun Linghui, Zhan Jianfei, Li Binhui, Han Xue, Lu Huimin, Jiang Chenggang. Carbon dioxide huff-puff technology and application in tight oil horizontal wells in the northern Songliao Basin [J]. Acta Petrolei Sinica, 2022, 43(7): 998-1006.
[2]	Guo Lingling, Liu Tao, Liu Ying, Lang Chengshan, Hu Shaobin. Theoretical model and field test of intermittent heat injection in the middle and late stage of steam flooding [J]. Acta Petrolei Sinica, 2019, 40(7): 823-829.
[3]	Gao Jiapei, Peng Chong, Niu Menglong, Zheng Jiangang, Li Yazhou, Ouyang Shikun, Li Wenhong. Acidification characteristics and kinetics of multi-hydrogen acid [J]. Acta Petrolei Sinica, 2019, 40(2): 207-214.
[4]	Kuang Yuchun, Luo Jinwu, Wang Li, Wang Fang, Zhang Liang, Li Shu, Yang Yingxin. Research and application of suction-type micro coring PDC drill bit [J]. Acta Petrolei Sinica, 2017, 38(9): 1073-1081.
[5]	Guan Wenlong, Zhang Xialin, Xi Changfeng, Wang Xiaochun, Yang Fengxiang, Shi Xiaorong, Li Qiu. Displacement characteristics and well pattern selection of vertical-well fire flooding in heavy oil reservoirs [J]. Acta Petrolei Sinica, 2017, 38(8): 935-946,972.
[6]	Liang Jinzhong, Wang Bojun, Guan Wenlong, Hou Pingshu, Peng Tuo, Miao Lijun. Technology and field test of cyclic in situ combustion in heavy oil reservoir [J]. Acta Petrolei Sinica, 2017, 38(3): 324-332.
[7]	Zhang Shengzhu, Wu Zongzhi. Risk-based optimization method for long-distance oil and gas transmission pipeline route [J]. ACTA PETROLEI SINICA, 2014, 35(3): 570-576.
[8]	Le Jianjun, Liu Fang, Zhang Jiyuan, Bai Lulu, Wang Rui, Liu Xiaobo, Hou Zhaowei, Wu Xiaolin. A field test of activation indigenous microorganism for microbial enhanced oil recovery in reservoir after polymer flooding [J]. ACTA PETROLEI SINICA, 2014, 35(1): 99-106.
[9]	ZHANG Ying　PAN Baozhi. Selection and identification of logging data for lithology recognition of volcanic rocks in Songliao Basin [J]. Editorial office of ACTA PETROLEI SINICA, 2012, 33(5): 830-834.
[10]	DENG Jingen　LI Ping　ZHOU Jianliang　HE Baosheng　CHEN Shenghong. Sand control optimization applied to moderately sanding wells in offshore loose sandstone reservoirs [J]. Editorial office of ACTA PETROLEI SINICA, 2012, 33(4): 676-680.
[11]	ZHU Xiaodong WANG Jie. A predictive model for oil-drilling parameters based on the hierarchical fuzzy system [J]. Editorial office of ACTA PETROLEI SINICA, 2010, 31(5): 838-842.
[12]	ZHANG Xu ZHAI Yinghu LI Zuguang YANG Minghe. Formation drillability evaluation using fractal theory [J]. Editorial office of ACTA PETROLEI SINICA, 2010, 31(1): 124-128.
[13]	LI Hongqi, GUO Haifeng, GUO Haimin, MENG Zhaoxu, TAN Fengqi, ZHANG Jun. An approach of data mining for evaluation of complex formation using well logs [J]. Editorial office of ACTA PETROLEI SINICA, 2009, 30(4): 542-549.
[14]	MA Hai, WANG Yanjiang, WEI Mao'an, HU Rui. A novel method for predicting formation drillability [J]. Editorial office of ACTA PETROLEI SINICA, 2008, 29(5): 761-765.
[15]	Guo Wankui, Yang Zhenyu, Wu Xiaolin, Zhang Guoyin, Wang Haifeng. New-type weak alkali surfactant applied to tertiary oil recovery [J]. Editorial office of ACTA PETROLEI SINICA, 2006, 27(5): 75-78.

A new method for PDC bit selection

PDC钻头选型新方法

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments