[1] 何江川,廖广志,王正茂,等.油田开发战略与接替技术[J].石油学报,2012,33(3):519-525.
He Jiangchuan,Liao Guangzhi,Wang Zhengmao,et al.Oilfield development strategy and replacement techniques[J].Acta Petrolei Sinica,2012,33(3):519-525.
[2] 东晓虎,刘慧卿,张红玲,等.稠油油藏注蒸汽开发后转热水驱实验与数值模拟[J].油气地质与采收率,2012,19(2):50-53.
Dong Xiaohu,Liu Huiqing,Zhang Hongling,et al.Experimental and simulation study of hot-water flooding of heavy oil reservoirs after steam injection[J].Petroleum Geology and Recovery Efficiency,2012,19(2):50-53.
[3] 王长久,刘慧卿,郑强.稠油油藏蒸汽吞吐后转驱方式优选及注采参数优化[J].特种油气藏,2013,20(3):72-75.
Wang Changjiu,Liu Huiqing,Zheng Qiang.Optimization of conversion scheme and parameters of injection & production after steam stimulation in heavy oil reservoirs[J].Special Oil and Gas Reservoir,2013,20(3):72-75.
[4] 郑家朋,东晓虎,刘慧卿,等.稠油油藏注蒸汽开发汽窜特征研究[J].特种油气藏,2012,19(6):72-75.
Zheng Jiapeng,Dong Xiaohu,Liu Huiqing,et al.Study on the characteristics of steam breakthrough during steam injection in heavy oil reservoirs[J].Special Oil and Gas Reservoirs,2012,19(6):72-75.
[5] 纪佑军,程林松,刘其成,等.超稠油油藏蒸汽与非凝析气驱油数字化实验[J].石油学报,2010,31(4):602-606.
Ji Youjun,Cheng Linsong,Liu Qicheng,et al.Digital experiment on steam and in-condensable gas push for extra heavy oil reservoir[J].Acta Petrolei Sinica,2010,31(4):602-606.
[6] 昝成,马德胜,王红庄,等.高温高压注蒸汽采油三维比例物理模拟新技术[J].石油勘探与开发,2011,38(6):738-743.
Zan Cheng,Ma Desheng,Wang Hongzhuang,et al.A new technology of 3D scaled physical simulation for high-pressure and high-temperature steam injection recovery[J].Petroleum Exploration and Development,2011,38(6):738-743.
[7] 刘文章.稠油注蒸汽热采工程[M].北京:石油工业出版社,1997.
Liu Wenzhang.Heavy oil steam injection thermal recovery project[M].Beijing:Petroleum Industry Press,1997.
[8] 高永荣,闫存章,刘尚奇,等.利用蒸汽超覆作用提高注蒸汽开发效果[J].石油学报,2007,28(4):91-94.
Gao Yongrong,Yan Cunzhang,Liu Shangqi,et al.Improving steam injection performance using steam overlap[J].Acta Petrolei Sinica,2007,28(4):91-94.
[9] 刘春泽,程林松,刘洋,等.水平井蒸汽吞吐加热半径和地层参数计算模型[J].石油学报,2008,29(1):101-105.
Liu Chunze,Cheng Linsong,Liu Yang,et al.Calculating models for heating radius of cyclic steam stimulation and formation parameters in horizontal well after soaking[J].Acta Petrolei Sinica,2008,29(1):101-105.
[10] 张红玲,刘慧卿,王晗,等.蒸汽吞吐汽窜调剖参数优化设计研究[J].石油学报,2007,28(2):105-108.
Zhang Hongling,Liu Huiqing,Wang Han,et al.Optimization design of profile control parameters for steam stimulation wells[J].Acta Petrolei Sinica,2007,28(2):105-108.
[11] 刘斌.齐40断块蒸汽驱试验效果评价方法研究[J].特种油气藏,2005,12(1):33-35.
Liu Bin.Assessment methods for steam drive test in Qi40 fault block[J].Special Oil and Gas Reservoirs,2005,12(1):33-35.
[12] 张顺利,许卫华.蒸汽吞吐油藏主要开发指标评价新探[J].河南石油,2006,20(2):45-47.
Zhang Shunli,Xu Weihua.New appraisal on major indexes of heavy oil production in steam soak reservoir[J].Henan Petroleum,2006,20(2):45-47.
[13] 童宪章.油井产状和油藏动态分析[M].北京:石油工业出版社,1981.
Tong Xianzhang.Well occurrence and reservoir dynamic analysis[M].Beijing:Petroleum Industry Press,1981.
[14] 侯健,于波,陈月明,等.稠油热采油藏经济开发模式研究[J].石油勘探与开发,2002,29(3):88-90.
Hou Jian,Yu Bo,Chen Yueming,et al.An approach to the economical development model of thermal recovery of heavy oil reservoirs[J]. Petroleum Exploration and Development,2002,29(3):88-90.
[15] 刘斌.辽河油田稠油采收率确定方法研究[J].石油勘探与开发,1996,23(1):55-58.
Liu Bin.Methods for determining heavy oil recovery factors of Liaohe oil field[J].Petroleum Exploration and Development,1996,23(1):55-58.
[16] 李平科,张侠,岳清山.蒸汽驱开发采收率预测新方法[J].石油勘探与开发,1996,23(1):51-54.
Li Pingke,Zhang Xia,Yue Qingshan.A new mtehod of predicting oil recovery factor of steam drive[J].Petroleum Exploration and Development,1996,23(1):51-54.
[17] 许心伟,张锐.稠油油藏蒸汽驱合理井网密度研究[J].石油勘探与开发,1998,25(4):45-48.
Xu Xinwei,Zhang Rui.A study on the reasonable well density of a viscous oil field operated by steam flooding[J].Petroleum Exploration and Development,1998,25(4):45-48. |